| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (c) 2011 The Chromium OS Authors. | |
| */ | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <log.h> | |
| #include <malloc.h> | |
| #include <net.h> | |
| #include <usb.h> | |
| #include <asm/cache.h> | |
| #include <dm/device-internal.h> | |
| #include "usb_ether.h" | |
| #define USB_BULK_RECV_TIMEOUT 500 | |
| int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize) | |
| { | |
| struct usb_device *udev = dev_get_parent_priv(dev); | |
| struct usb_interface_descriptor *iface_desc; | |
| bool ep_in_found = false, ep_out_found = false; | |
| struct usb_interface *iface; | |
| const int ifnum = 0; /* Always use interface 0 */ | |
| int ret, i; | |
| iface = &udev->config.if_desc[ifnum]; | |
| iface_desc = &udev->config.if_desc[ifnum].desc; | |
| /* Initialize the ueth_data structure with some useful info */ | |
| ueth->ifnum = ifnum; | |
| ueth->subclass = iface_desc->bInterfaceSubClass; | |
| ueth->protocol = iface_desc->bInterfaceProtocol; | |
| /* | |
| * We are expecting a minimum of 3 endpoints - in, out (bulk), and int. | |
| * We will ignore any others. | |
| */ | |
| for (i = 0; i < iface_desc->bNumEndpoints; i++) { | |
| int ep_addr = iface->ep_desc[i].bEndpointAddress; | |
| /* is it an BULK endpoint? */ | |
| if ((iface->ep_desc[i].bmAttributes & | |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { | |
| if (ep_addr & USB_DIR_IN && !ep_in_found) { | |
| ueth->ep_in = ep_addr & | |
| USB_ENDPOINT_NUMBER_MASK; | |
| ep_in_found = true; | |
| } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) { | |
| ueth->ep_out = ep_addr & | |
| USB_ENDPOINT_NUMBER_MASK; | |
| ep_out_found = true; | |
| } | |
| } | |
| /* is it an interrupt endpoint? */ | |
| if ((iface->ep_desc[i].bmAttributes & | |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { | |
| ueth->ep_int = iface->ep_desc[i].bEndpointAddress & | |
| USB_ENDPOINT_NUMBER_MASK; | |
| ueth->irqinterval = iface->ep_desc[i].bInterval; | |
| } | |
| } | |
| debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out, | |
| ueth->ep_int); | |
| /* Do some basic sanity checks, and bail if we find a problem */ | |
| if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) { | |
| debug("%s: %s: Cannot find endpoints\n", __func__, dev->name); | |
| return -ENXIO; | |
| } | |
| ueth->rxsize = rxsize; | |
| ueth->rxbuf = memalign(ARCH_DMA_MINALIGN, rxsize); | |
| if (!ueth->rxbuf) | |
| return -ENOMEM; | |
| ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum); | |
| if (ret) { | |
| debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name, | |
| ret); | |
| return ret; | |
| } | |
| ueth->pusb_dev = udev; | |
| return 0; | |
| } | |
| int usb_ether_deregister(struct ueth_data *ueth) | |
| { | |
| return 0; | |
| } | |
| int usb_ether_receive(struct ueth_data *ueth, int rxsize) | |
| { | |
| int actual_len; | |
| int ret; | |
| if (rxsize > ueth->rxsize) | |
| return -EINVAL; | |
| ret = usb_bulk_msg(ueth->pusb_dev, | |
| usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in), | |
| ueth->rxbuf, rxsize, &actual_len, | |
| USB_BULK_RECV_TIMEOUT); | |
| debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret); | |
| if (ret) { | |
| printf("Rx: failed to receive: %d\n", ret); | |
| return ret; | |
| } | |
| if (actual_len > rxsize) { | |
| debug("Rx: received too many bytes %d\n", actual_len); | |
| return -ENOSPC; | |
| } | |
| ueth->rxlen = actual_len; | |
| ueth->rxptr = 0; | |
| return actual_len ? 0 : -EAGAIN; | |
| } | |
| void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes) | |
| { | |
| ueth->rxptr += num_bytes; | |
| if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen) | |
| ueth->rxlen = 0; | |
| } | |
| int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp) | |
| { | |
| if (!ueth->rxlen) | |
| return 0; | |
| *ptrp = &ueth->rxbuf[ueth->rxptr]; | |
| return ueth->rxlen - ueth->rxptr; | |
| } |