| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * a3m071 board Device Tree Source | |
| * | |
| * Copyright 2012 Stefan Roese <sr@denx.de> | |
| * | |
| * Copyright (C) 2011 DENX Software Engineering GmbH | |
| * Heiko Schocher <hs@denx.de> | |
| * | |
| * Copyright (C) 2007 Semihalf | |
| * Marian Balakowicz <m8@semihalf.com> | |
| */ | |
| /include/ "mpc5200b.dtsi" | |
| &gpt0 { fsl,has-wdt; }; | |
| / { | |
| model = "anonymous,a3m071"; | |
| compatible = "anonymous,a3m071"; | |
| soc5200@f0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,mpc5200b-immr"; | |
| ranges = <0 0xf0000000 0x0000c000>; | |
| reg = <0xf0000000 0x00000100>; | |
| bus-frequency = <0>; /* From boot loader */ | |
| system-frequency = <0>; /* From boot loader */ | |
| spi@f00 { | |
| status = "disabled"; | |
| }; | |
| usb: usb@1000 { | |
| status = "disabled"; | |
| }; | |
| psc@2000 { | |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | |
| reg = <0x2000 0x100>; | |
| interrupts = <2 1 0>; | |
| }; | |
| psc@2200 { | |
| status = "disabled"; | |
| }; | |
| psc@2400 { | |
| status = "disabled"; | |
| }; | |
| psc@2600 { | |
| status = "disabled"; | |
| }; | |
| psc@2800 { | |
| status = "disabled"; | |
| }; | |
| psc@2c00 { // PSC6 | |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | |
| reg = <0x2c00 0x100>; | |
| interrupts = <2 4 0>; | |
| }; | |
| ethernet@3000 { | |
| phy-handle = <&phy0>; | |
| }; | |
| mdio@3000 { | |
| phy0: ethernet-phy@3 { | |
| reg = <0x03>; | |
| }; | |
| }; | |
| ata@3a00 { | |
| status = "disabled"; | |
| }; | |
| i2c@3d00 { | |
| status = "disabled"; | |
| }; | |
| i2c@3d40 { | |
| status = "disabled"; | |
| }; | |
| }; | |
| localbus { | |
| compatible = "fsl,mpc5200b-lpb","simple-bus"; | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| ranges = <0 0 0xfc000000 0x02000000 | |
| 3 0 0xe9000000 0x00080000 | |
| 5 0 0xe8000000 0x00010000>; | |
| flash@0,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| reg = <0 0x0 0x02000000>; | |
| compatible = "cfi-flash"; | |
| bank-width = <2>; | |
| partition@0 { | |
| label = "u-boot"; | |
| reg = <0x00000000 0x00040000>; | |
| read-only; | |
| }; | |
| partition@40000 { | |
| label = "env"; | |
| reg = <0x00040000 0x00020000>; | |
| }; | |
| partition@60000 { | |
| label = "dtb"; | |
| reg = <0x00060000 0x00020000>; | |
| }; | |
| partition@80000 { | |
| label = "kernel"; | |
| reg = <0x00080000 0x00500000>; | |
| }; | |
| partition@580000 { | |
| label = "root"; | |
| reg = <0x00580000 0x00A80000>; | |
| }; | |
| }; | |
| fpga@3,0 { | |
| compatible = "anonymous,a3m071-fpga"; | |
| reg = <3 0x0 0x00080000 | |
| 5 0x0 0x00010000>; | |
| interrupts = <0 0 3>; /* level low */ | |
| }; | |
| }; | |
| pci@f0000d00 { | |
| status = "disabled"; | |
| }; | |
| }; |