| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2000-2009 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| */ | |
| #ifndef USE_HOSTCC | |
| #include <bootm.h> | |
| #include <bootstage.h> | |
| #include <dm/root.h> | |
| #include <cli.h> | |
| #include <command.h> | |
| #include <cpu_func.h> | |
| #include <env.h> | |
| #include <errno.h> | |
| #include <fdt_support.h> | |
| #include <irq_func.h> | |
| #include <lmb.h> | |
| #include <log.h> | |
| #include <malloc.h> | |
| #include <mapmem.h> | |
| #include <net.h> | |
| #include <asm/cache.h> | |
| #include <asm/global_data.h> | |
| #include <asm/io.h> | |
| #include <linux/sizes.h> | |
| #include <tpm-v2.h> | |
| #include <tpm_tcg2.h> | |
| #if defined(CONFIG_CMD_USB) | |
| #include <usb.h> | |
| #endif | |
| #else | |
| #include "mkimage.h" | |
| #endif | |
| #include <bootm.h> | |
| #include <image.h> | |
| #include <u-boot/zlib.h> | |
| #define MAX_CMDLINE_SIZE SZ_4K | |
| #define IH_INITRD_ARCH IH_ARCH_DEFAULT | |
| #ifndef USE_HOSTCC | |
| DECLARE_GLOBAL_DATA_PTR; | |
| struct bootm_headers images; /* pointers to os/initrd/fdt images */ | |
| __weak void board_quiesce_devices(void) | |
| { | |
| } | |
| #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) | |
| /** | |
| * image_get_kernel - verify legacy format kernel image | |
| * @img_addr: in RAM address of the legacy format image to be verified | |
| * @verify: data CRC verification flag | |
| * | |
| * image_get_kernel() verifies legacy image integrity and returns pointer to | |
| * legacy image header if image verification was completed successfully. | |
| * | |
| * returns: | |
| * pointer to a legacy image header if valid image was found | |
| * otherwise return NULL | |
| */ | |
| static struct legacy_img_hdr *image_get_kernel(ulong img_addr, int verify) | |
| { | |
| struct legacy_img_hdr *hdr = (struct legacy_img_hdr *)img_addr; | |
| if (!image_check_magic(hdr)) { | |
| puts("Bad Magic Number\n"); | |
| bootstage_error(BOOTSTAGE_ID_CHECK_MAGIC); | |
| return NULL; | |
| } | |
| bootstage_mark(BOOTSTAGE_ID_CHECK_HEADER); | |
| if (!image_check_hcrc(hdr)) { | |
| puts("Bad Header Checksum\n"); | |
| bootstage_error(BOOTSTAGE_ID_CHECK_HEADER); | |
| return NULL; | |
| } | |
| bootstage_mark(BOOTSTAGE_ID_CHECK_CHECKSUM); | |
| image_print_contents(hdr); | |
| if (verify) { | |
| puts(" Verifying Checksum ... "); | |
| if (!image_check_dcrc(hdr)) { | |
| printf("Bad Data CRC\n"); | |
| bootstage_error(BOOTSTAGE_ID_CHECK_CHECKSUM); | |
| return NULL; | |
| } | |
| puts("OK\n"); | |
| } | |
| bootstage_mark(BOOTSTAGE_ID_CHECK_ARCH); | |
| if (!image_check_target_arch(hdr)) { | |
| printf("Unsupported Architecture 0x%x\n", image_get_arch(hdr)); | |
| bootstage_error(BOOTSTAGE_ID_CHECK_ARCH); | |
| return NULL; | |
| } | |
| return hdr; | |
| } | |
| #endif | |
| /** | |
| * boot_get_kernel() - find kernel image | |
| * | |
| * @addr_fit: first argument to bootm: address, fit configuration, etc. | |
| * @os_data: pointer to a ulong variable, will hold os data start address | |
| * @os_len: pointer to a ulong variable, will hold os data length | |
| * address and length, otherwise NULL | |
| * pointer to image header if valid image was found, plus kernel start | |
| * @kernp: image header if valid image was found, otherwise NULL | |
| * | |
| * boot_get_kernel() tries to find a kernel image, verifies its integrity | |
| * and locates kernel data. | |
| * | |
| * Return: 0 on success, -ve on error. -EPROTOTYPE means that the image is in | |
| * a wrong or unsupported format | |
| */ | |
| static int boot_get_kernel(const char *addr_fit, struct bootm_headers *images, | |
| ulong *os_data, ulong *os_len, const void **kernp) | |
| { | |
| #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) | |
| struct legacy_img_hdr *hdr; | |
| #endif | |
| ulong img_addr; | |
| const void *buf; | |
| const char *fit_uname_config = NULL, *fit_uname_kernel = NULL; | |
| #if CONFIG_IS_ENABLED(FIT) | |
| int os_noffset; | |
| #endif | |
| #ifdef CONFIG_ANDROID_BOOT_IMAGE | |
| const void *boot_img; | |
| const void *vendor_boot_img; | |
| #endif | |
| img_addr = genimg_get_kernel_addr_fit(addr_fit, &fit_uname_config, | |
| &fit_uname_kernel); | |
| if (IS_ENABLED(CONFIG_CMD_BOOTM_PRE_LOAD)) | |
| img_addr += image_load_offset; | |
| bootstage_mark(BOOTSTAGE_ID_CHECK_MAGIC); | |
| /* check image type, for FIT images get FIT kernel node */ | |
| *os_data = *os_len = 0; | |
| buf = map_sysmem(img_addr, 0); | |
| switch (genimg_get_format(buf)) { | |
| #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) | |
| case IMAGE_FORMAT_LEGACY: | |
| printf("## Booting kernel from Legacy Image at %08lx ...\n", | |
| img_addr); | |
| hdr = image_get_kernel(img_addr, images->verify); | |
| if (!hdr) | |
| return -EINVAL; | |
| bootstage_mark(BOOTSTAGE_ID_CHECK_IMAGETYPE); | |
| /* get os_data and os_len */ | |
| switch (image_get_type(hdr)) { | |
| case IH_TYPE_KERNEL: | |
| case IH_TYPE_KERNEL_NOLOAD: | |
| *os_data = image_get_data(hdr); | |
| *os_len = image_get_data_size(hdr); | |
| break; | |
| case IH_TYPE_MULTI: | |
| image_multi_getimg(hdr, 0, os_data, os_len); | |
| break; | |
| case IH_TYPE_STANDALONE: | |
| *os_data = image_get_data(hdr); | |
| *os_len = image_get_data_size(hdr); | |
| break; | |
| default: | |
| bootstage_error(BOOTSTAGE_ID_CHECK_IMAGETYPE); | |
| return -EPROTOTYPE; | |
| } | |
| /* | |
| * copy image header to allow for image overwrites during | |
| * kernel decompression. | |
| */ | |
| memmove(&images->legacy_hdr_os_copy, hdr, | |
| sizeof(struct legacy_img_hdr)); | |
| /* save pointer to image header */ | |
| images->legacy_hdr_os = hdr; | |
| images->legacy_hdr_valid = 1; | |
| bootstage_mark(BOOTSTAGE_ID_DECOMP_IMAGE); | |
| break; | |
| #endif | |
| #if CONFIG_IS_ENABLED(FIT) | |
| case IMAGE_FORMAT_FIT: | |
| os_noffset = fit_image_load(images, img_addr, | |
| &fit_uname_kernel, &fit_uname_config, | |
| IH_ARCH_DEFAULT, IH_TYPE_KERNEL, | |
| BOOTSTAGE_ID_FIT_KERNEL_START, | |
| FIT_LOAD_IGNORED, os_data, os_len); | |
| if (os_noffset < 0) | |
| return -ENOENT; | |
| images->fit_hdr_os = map_sysmem(img_addr, 0); | |
| images->fit_uname_os = fit_uname_kernel; | |
| images->fit_uname_cfg = fit_uname_config; | |
| images->fit_noffset_os = os_noffset; | |
| break; | |
| #endif | |
| #ifdef CONFIG_ANDROID_BOOT_IMAGE | |
| case IMAGE_FORMAT_ANDROID: { | |
| int ret; | |
| boot_img = buf; | |
| vendor_boot_img = NULL; | |
| if (IS_ENABLED(CONFIG_CMD_ABOOTIMG)) { | |
| boot_img = map_sysmem(get_abootimg_addr(), 0); | |
| vendor_boot_img = map_sysmem(get_avendor_bootimg_addr(), 0); | |
| } | |
| printf("## Booting Android Image at 0x%08lx ...\n", img_addr); | |
| ret = android_image_get_kernel(boot_img, vendor_boot_img, | |
| images->verify, os_data, os_len); | |
| if (IS_ENABLED(CONFIG_CMD_ABOOTIMG)) { | |
| unmap_sysmem(vendor_boot_img); | |
| unmap_sysmem(boot_img); | |
| } | |
| if (ret) | |
| return ret; | |
| break; | |
| } | |
| #endif | |
| default: | |
| bootstage_error(BOOTSTAGE_ID_CHECK_IMAGETYPE); | |
| return -EPROTOTYPE; | |
| } | |
| debug(" kernel data at 0x%08lx, len = 0x%08lx (%ld)\n", | |
| *os_data, *os_len, *os_len); | |
| *kernp = buf; | |
| return 0; | |
| } | |
| static int bootm_start(void) | |
| { | |
| memset((void *)&images, 0, sizeof(images)); | |
| images.verify = env_get_yesno("verify"); | |
| bootstage_mark_name(BOOTSTAGE_ID_BOOTM_START, "bootm_start"); | |
| images.state = BOOTM_STATE_START; | |
| return 0; | |
| } | |
| static ulong bootm_data_addr(const char *addr_str) | |
| { | |
| ulong addr; | |
| if (addr_str) | |
| addr = hextoul(addr_str, NULL); | |
| else | |
| addr = image_load_addr; | |
| return addr; | |
| } | |
| /** | |
| * bootm_pre_load() - Handle the pre-load processing | |
| * | |
| * This can be used to do a full signature check of the image, for example. | |
| * It calls image_pre_load() with the data address of the image to check. | |
| * | |
| * @addr_str: String containing load address in hex, or NULL to use | |
| * image_load_addr | |
| * Return: 0 if OK, CMD_RET_FAILURE on failure | |
| */ | |
| static int bootm_pre_load(const char *addr_str) | |
| { | |
| ulong data_addr = bootm_data_addr(addr_str); | |
| int ret = 0; | |
| if (IS_ENABLED(CONFIG_CMD_BOOTM_PRE_LOAD)) | |
| ret = image_pre_load(data_addr); | |
| if (ret) | |
| ret = CMD_RET_FAILURE; | |
| return ret; | |
| } | |
| /** | |
| * bootm_find_os(): Find the OS to boot | |
| * | |
| * @cmd_name: Command name that started this boot, e.g. "bootm" | |
| * @addr_fit: Address and/or FIT specifier (first arg of bootm command) | |
| * Return: 0 on success, -ve on error | |
| */ | |
| static int bootm_find_os(const char *cmd_name, const char *addr_fit) | |
| { | |
| const void *os_hdr; | |
| #ifdef CONFIG_ANDROID_BOOT_IMAGE | |
| const void *vendor_boot_img; | |
| const void *boot_img; | |
| #endif | |
| bool ep_found = false; | |
| int ret; | |
| /* get kernel image header, start address and length */ | |
| ret = boot_get_kernel(addr_fit, &images, &images.os.image_start, | |
| &images.os.image_len, &os_hdr); | |
| if (ret) { | |
| if (ret == -EPROTOTYPE) | |
| printf("Wrong Image Type for %s command\n", cmd_name); | |
| printf("ERROR %dE: can't get kernel image!\n", ret); | |
| return 1; | |
| } | |
| /* get image parameters */ | |
| switch (genimg_get_format(os_hdr)) { | |
| #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) | |
| case IMAGE_FORMAT_LEGACY: | |
| images.os.type = image_get_type(os_hdr); | |
| images.os.comp = image_get_comp(os_hdr); | |
| images.os.os = image_get_os(os_hdr); | |
| images.os.end = image_get_image_end(os_hdr); | |
| images.os.load = image_get_load(os_hdr); | |
| images.os.arch = image_get_arch(os_hdr); | |
| break; | |
| #endif | |
| #if CONFIG_IS_ENABLED(FIT) | |
| case IMAGE_FORMAT_FIT: | |
| if (fit_image_get_type(images.fit_hdr_os, | |
| images.fit_noffset_os, | |
| &images.os.type)) { | |
| puts("Can't get image type!\n"); | |
| bootstage_error(BOOTSTAGE_ID_FIT_TYPE); | |
| return 1; | |
| } | |
| if (fit_image_get_comp(images.fit_hdr_os, | |
| images.fit_noffset_os, | |
| &images.os.comp)) { | |
| puts("Can't get image compression!\n"); | |
| bootstage_error(BOOTSTAGE_ID_FIT_COMPRESSION); | |
| return 1; | |
| } | |
| if (fit_image_get_os(images.fit_hdr_os, images.fit_noffset_os, | |
| &images.os.os)) { | |
| puts("Can't get image OS!\n"); | |
| bootstage_error(BOOTSTAGE_ID_FIT_OS); | |
| return 1; | |
| } | |
| if (fit_image_get_arch(images.fit_hdr_os, | |
| images.fit_noffset_os, | |
| &images.os.arch)) { | |
| puts("Can't get image ARCH!\n"); | |
| return 1; | |
| } | |
| images.os.end = fit_get_end(images.fit_hdr_os); | |
| if (fit_image_get_load(images.fit_hdr_os, images.fit_noffset_os, | |
| &images.os.load)) { | |
| puts("Can't get image load address!\n"); | |
| bootstage_error(BOOTSTAGE_ID_FIT_LOADADDR); | |
| return 1; | |
| } | |
| break; | |
| #endif | |
| #ifdef CONFIG_ANDROID_BOOT_IMAGE | |
| case IMAGE_FORMAT_ANDROID: | |
| boot_img = os_hdr; | |
| vendor_boot_img = NULL; | |
| if (IS_ENABLED(CONFIG_CMD_ABOOTIMG)) { | |
| boot_img = map_sysmem(get_abootimg_addr(), 0); | |
| vendor_boot_img = map_sysmem(get_avendor_bootimg_addr(), 0); | |
| } | |
| images.os.type = IH_TYPE_KERNEL; | |
| images.os.comp = android_image_get_kcomp(boot_img, vendor_boot_img); | |
| images.os.os = IH_OS_LINUX; | |
| images.os.end = android_image_get_end(boot_img, vendor_boot_img); | |
| images.os.load = android_image_get_kload(boot_img, vendor_boot_img); | |
| images.ep = images.os.load; | |
| ep_found = true; | |
| if (IS_ENABLED(CONFIG_CMD_ABOOTIMG)) { | |
| unmap_sysmem(vendor_boot_img); | |
| unmap_sysmem(boot_img); | |
| } | |
| break; | |
| #endif | |
| default: | |
| puts("ERROR: unknown image format type!\n"); | |
| return 1; | |
| } | |
| /* If we have a valid setup.bin, we will use that for entry (x86) */ | |
| if (images.os.arch == IH_ARCH_I386 || | |
| images.os.arch == IH_ARCH_X86_64) { | |
| ulong len; | |
| ret = boot_get_setup(&images, IH_ARCH_I386, &images.ep, &len); | |
| if (ret < 0 && ret != -ENOENT) { | |
| puts("Could not find a valid setup.bin for x86\n"); | |
| return 1; | |
| } | |
| /* Kernel entry point is the setup.bin */ | |
| } else if (images.legacy_hdr_valid) { | |
| images.ep = image_get_ep(&images.legacy_hdr_os_copy); | |
| #if CONFIG_IS_ENABLED(FIT) | |
| } else if (images.fit_uname_os) { | |
| int ret; | |
| ret = fit_image_get_entry(images.fit_hdr_os, | |
| images.fit_noffset_os, &images.ep); | |
| if (ret) { | |
| puts("Can't get entry point property!\n"); | |
| return 1; | |
| } | |
| #endif | |
| } else if (!ep_found) { | |
| puts("Could not find kernel entry point!\n"); | |
| return 1; | |
| } | |
| if (images.os.type == IH_TYPE_KERNEL_NOLOAD) { | |
| images.os.load = images.os.image_start; | |
| images.ep += images.os.image_start; | |
| } | |
| images.os.start = map_to_sysmem(os_hdr); | |
| return 0; | |
| } | |
| /** | |
| * check_overlap() - Check if an image overlaps the OS | |
| * | |
| * @name: Name of image to check (used to print error) | |
| * @base: Base address of image | |
| * @end: End address of image (+1) | |
| * @os_start: Start of OS | |
| * @os_size: Size of OS in bytes | |
| * Return: 0 if OK, -EXDEV if the image overlaps the OS | |
| */ | |
| static int check_overlap(const char *name, ulong base, ulong end, | |
| ulong os_start, ulong os_size) | |
| { | |
| ulong os_end; | |
| if (!base) | |
| return 0; | |
| os_end = os_start + os_size; | |
| if ((base >= os_start && base < os_end) || | |
| (end > os_start && end <= os_end) || | |
| (base < os_start && end >= os_end)) { | |
| printf("ERROR: %s image overlaps OS image (OS=%lx..%lx)\n", | |
| name, os_start, os_end); | |
| return -EXDEV; | |
| } | |
| return 0; | |
| } | |
| int bootm_find_images(ulong img_addr, const char *conf_ramdisk, | |
| const char *conf_fdt, ulong start, ulong size) | |
| { | |
| const char *select = conf_ramdisk; | |
| char addr_str[17]; | |
| void *buf; | |
| int ret; | |
| if (IS_ENABLED(CONFIG_ANDROID_BOOT_IMAGE)) { | |
| /* Look for an Android boot image */ | |
| buf = map_sysmem(images.os.start, 0); | |
| if (buf && genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) { | |
| strcpy(addr_str, simple_xtoa(img_addr)); | |
| select = addr_str; | |
| } | |
| } | |
| if (conf_ramdisk) | |
| select = conf_ramdisk; | |
| /* find ramdisk */ | |
| ret = boot_get_ramdisk(select, &images, IH_INITRD_ARCH, | |
| &images.rd_start, &images.rd_end); | |
| if (ret) { | |
| puts("Ramdisk image is corrupt or invalid\n"); | |
| return 1; | |
| } | |
| /* check if ramdisk overlaps OS image */ | |
| if (check_overlap("RD", images.rd_start, images.rd_end, start, size)) | |
| return 1; | |
| if (CONFIG_IS_ENABLED(OF_LIBFDT)) { | |
| buf = map_sysmem(img_addr, 0); | |
| /* find flattened device tree */ | |
| ret = boot_get_fdt(buf, conf_fdt, IH_ARCH_DEFAULT, &images, | |
| &images.ft_addr, &images.ft_len); | |
| if (ret) { | |
| puts("Could not find a valid device tree\n"); | |
| return 1; | |
| } | |
| /* check if FDT overlaps OS image */ | |
| if (check_overlap("FDT", map_to_sysmem(images.ft_addr), | |
| images.ft_len, start, size)) | |
| return 1; | |
| if (IS_ENABLED(CONFIG_CMD_FDT)) | |
| set_working_fdt_addr(map_to_sysmem(images.ft_addr)); | |
| } | |
| #if CONFIG_IS_ENABLED(FIT) | |
| if (IS_ENABLED(CONFIG_FPGA)) { | |
| /* find bitstreams */ | |
| ret = boot_get_fpga(&images); | |
| if (ret) { | |
| printf("FPGA image is corrupted or invalid\n"); | |
| return 1; | |
| } | |
| } | |
| /* find all of the loadables */ | |
| ret = boot_get_loadable(&images); | |
| if (ret) { | |
| printf("Loadable(s) is corrupt or invalid\n"); | |
| return 1; | |
| } | |
| #endif | |
| return 0; | |
| } | |
| static int bootm_find_other(ulong img_addr, const char *conf_ramdisk, | |
| const char *conf_fdt) | |
| { | |
| if ((images.os.type == IH_TYPE_KERNEL || | |
| images.os.type == IH_TYPE_KERNEL_NOLOAD || | |
| images.os.type == IH_TYPE_MULTI) && | |
| (images.os.os == IH_OS_LINUX || images.os.os == IH_OS_VXWORKS || | |
| images.os.os == IH_OS_EFI || images.os.os == IH_OS_TEE || | |
| images.os.os == IH_OS_ELF)) { | |
| return bootm_find_images(img_addr, conf_ramdisk, conf_fdt, 0, | |
| 0); | |
| } | |
| return 0; | |
| } | |
| #endif /* USE_HOSTC */ | |
| #if !defined(USE_HOSTCC) || defined(CONFIG_FIT_SIGNATURE) | |
| /** | |
| * handle_decomp_error() - display a decompression error | |
| * | |
| * This function tries to produce a useful message. In the case where the | |
| * uncompressed size is the same as the available space, we can assume that | |
| * the image is too large for the buffer. | |
| * | |
| * @comp_type: Compression type being used (IH_COMP_...) | |
| * @uncomp_size: Number of bytes uncompressed | |
| * @buf_size: Number of bytes the decompresion buffer was | |
| * @ret: errno error code received from compression library | |
| * Return: Appropriate BOOTM_ERR_ error code | |
| */ | |
| static int handle_decomp_error(int comp_type, size_t uncomp_size, | |
| size_t buf_size, int ret) | |
| { | |
| const char *name = genimg_get_comp_name(comp_type); | |
| /* ENOSYS means unimplemented compression type, don't reset. */ | |
| if (ret == -ENOSYS) | |
| return BOOTM_ERR_UNIMPLEMENTED; | |
| if ((comp_type == IH_COMP_GZIP && ret == Z_BUF_ERROR) || | |
| uncomp_size >= buf_size) | |
| printf("Image too large: increase CONFIG_SYS_BOOTM_LEN\n"); | |
| else | |
| printf("%s: uncompress error %d\n", name, ret); | |
| /* | |
| * The decompression routines are now safe, so will not write beyond | |
| * their bounds. Probably it is not necessary to reset, but maintain | |
| * the current behaviour for now. | |
| */ | |
| printf("Must RESET board to recover\n"); | |
| #ifndef USE_HOSTCC | |
| bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE); | |
| #endif | |
| return BOOTM_ERR_RESET; | |
| } | |
| #endif | |
| #ifndef USE_HOSTCC | |
| static int bootm_load_os(struct bootm_headers *images, int boot_progress) | |
| { | |
| const struct image_info os = images->os; | |
| ulong load = os.load; | |
| ulong load_end; | |
| ulong blob_start = os.start; | |
| ulong blob_end = os.end; | |
| ulong image_start = os.image_start; | |
| ulong image_len = os.image_len; | |
| ulong flush_start = ALIGN_DOWN(load, ARCH_DMA_MINALIGN); | |
| bool no_overlap; | |
| void *load_buf, *image_buf; | |
| int err; | |
| /* | |
| * For a "noload" compressed kernel we need to allocate a buffer large | |
| * enough to decompress in to and use that as the load address now. | |
| * Assume that the kernel compression is at most a factor of 4 since | |
| * zstd almost achieves that. | |
| * Use an alignment of 2MB since this might help arm64 | |
| */ | |
| if (os.type == IH_TYPE_KERNEL_NOLOAD && os.comp != IH_COMP_NONE) { | |
| ulong req_size = ALIGN(image_len * 4, SZ_1M); | |
| phys_addr_t addr; | |
| err = lmb_alloc_mem(LMB_MEM_ALLOC_ANY, SZ_2M, &addr, | |
| req_size, LMB_NONE); | |
| if (err) | |
| return 1; | |
| load = (ulong)addr; | |
| images->os.load = (ulong)addr; | |
| images->ep = (ulong)addr; | |
| debug("Allocated %lx bytes at %lx for kernel (size %lx) decompression\n", | |
| req_size, load, image_len); | |
| } | |
| load_buf = map_sysmem(load, 0); | |
| image_buf = map_sysmem(os.image_start, image_len); | |
| err = image_decomp(os.comp, load, os.image_start, os.type, | |
| load_buf, image_buf, image_len, | |
| CONFIG_SYS_BOOTM_LEN, &load_end); | |
| if (err) { | |
| err = handle_decomp_error(os.comp, load_end - load, | |
| CONFIG_SYS_BOOTM_LEN, err); | |
| bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE); | |
| return err; | |
| } | |
| /* We need the decompressed image size in the next steps */ | |
| images->os.image_len = load_end - load; | |
| flush_cache(flush_start, ALIGN(load_end, ARCH_DMA_MINALIGN) - flush_start); | |
| debug(" kernel loaded at 0x%08lx, end = 0x%08lx\n", load, load_end); | |
| bootstage_mark(BOOTSTAGE_ID_KERNEL_LOADED); | |
| no_overlap = (os.comp == IH_COMP_NONE && load == image_start); | |
| if (!no_overlap && load < blob_end && load_end > blob_start) { | |
| debug("images.os.start = 0x%lX, images.os.end = 0x%lx\n", | |
| blob_start, blob_end); | |
| debug("images.os.load = 0x%lx, load_end = 0x%lx\n", load, | |
| load_end); | |
| /* Check what type of image this is. */ | |
| if (images->legacy_hdr_valid) { | |
| if (image_get_type(&images->legacy_hdr_os_copy) | |
| == IH_TYPE_MULTI) | |
| puts("WARNING: legacy format multi component image overwritten\n"); | |
| return BOOTM_ERR_OVERLAP; | |
| } else { | |
| puts("ERROR: new format image overwritten - must RESET the board to recover\n"); | |
| bootstage_error(BOOTSTAGE_ID_OVERWRITTEN); | |
| return BOOTM_ERR_RESET; | |
| } | |
| } | |
| if (IS_ENABLED(CONFIG_CMD_BOOTI) && images->os.arch == IH_ARCH_ARM64 && | |
| images->os.os == IH_OS_LINUX) { | |
| ulong relocated_addr; | |
| ulong image_size; | |
| int ret; | |
| ret = booti_setup(load, &relocated_addr, &image_size, false); | |
| if (ret) { | |
| printf("Failed to prep arm64 kernel (err=%d)\n", ret); | |
| return BOOTM_ERR_RESET; | |
| } | |
| /* Handle BOOTM_STATE_LOADOS */ | |
| if (relocated_addr != load) { | |
| printf("Moving Image from 0x%lx to 0x%lx, end=0x%lx\n", | |
| load, relocated_addr, | |
| relocated_addr + image_size); | |
| memmove((void *)relocated_addr, load_buf, image_size); | |
| } | |
| images->ep = relocated_addr; | |
| images->os.start = relocated_addr; | |
| images->os.end = relocated_addr + image_size; | |
| } | |
| if (CONFIG_IS_ENABLED(LMB)) { | |
| phys_addr_t load; | |
| load = (phys_addr_t)images->os.load; | |
| err = lmb_alloc_mem(LMB_MEM_ALLOC_ADDR, 0, &load, | |
| (load_end - images->os.load), LMB_NONE); | |
| if (err) { | |
| log_err("Unable to allocate memory %#lx for loading OS\n", | |
| images->os.load); | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * bootm_disable_interrupts() - Disable interrupts in preparation for load/boot | |
| * | |
| * Return: interrupt flag (0 if interrupts were disabled, non-zero if they were | |
| * enabled) | |
| */ | |
| ulong bootm_disable_interrupts(void) | |
| { | |
| ulong iflag; | |
| /* | |
| * We have reached the point of no return: we are going to | |
| * overwrite all exception vector code, so we cannot easily | |
| * recover from any failures any more... | |
| */ | |
| iflag = disable_interrupts(); | |
| #ifdef CONFIG_NETCONSOLE | |
| /* Stop the ethernet stack if NetConsole could have left it up */ | |
| eth_halt(); | |
| #endif | |
| return iflag; | |
| } | |
| #define CONSOLE_ARG "console=" | |
| #define NULL_CONSOLE (CONSOLE_ARG "ttynull") | |
| #define CONSOLE_ARG_SIZE sizeof(NULL_CONSOLE) | |
| /** | |
| * fixup_silent_linux() - Handle silencing the linux boot if required | |
| * | |
| * This uses the silent_linux envvar to control whether to add/set a "console=" | |
| * parameter to the command line | |
| * | |
| * @buf: Buffer containing the string to process | |
| * @maxlen: Maximum length of buffer | |
| * Return: 0 if OK, -ENOSPC if @maxlen is too small | |
| */ | |
| static int fixup_silent_linux(char *buf, int maxlen) | |
| { | |
| int want_silent; | |
| char *cmdline; | |
| int size; | |
| /* | |
| * Move the input string to the end of buffer. The output string will be | |
| * built up at the start. | |
| */ | |
| size = strlen(buf) + 1; | |
| if (size * 2 > maxlen) | |
| return -ENOSPC; | |
| cmdline = buf + maxlen - size; | |
| memmove(cmdline, buf, size); | |
| /* | |
| * Only fix cmdline when requested. The environment variable can be: | |
| * | |
| * no - we never fixup | |
| * yes - we always fixup | |
| * unset - we rely on the console silent flag | |
| */ | |
| want_silent = env_get_yesno("silent_linux"); | |
| if (want_silent == 0) | |
| return 0; | |
| else if (want_silent == -1 && !(gd->flags & GD_FLG_SILENT)) | |
| return 0; | |
| debug("before silent fix-up: %s\n", cmdline); | |
| if (*cmdline) { | |
| char *start = strstr(cmdline, CONSOLE_ARG); | |
| /* Check space for maximum possible new command line */ | |
| if (size + CONSOLE_ARG_SIZE > maxlen) | |
| return -ENOSPC; | |
| if (start) { | |
| char *end = strchr(start, ' '); | |
| int start_bytes; | |
| start_bytes = start - cmdline; | |
| strncpy(buf, cmdline, start_bytes); | |
| strncpy(buf + start_bytes, NULL_CONSOLE, CONSOLE_ARG_SIZE); | |
| if (end) | |
| strcpy(buf + start_bytes + CONSOLE_ARG_SIZE - 1, end); | |
| else | |
| buf[start_bytes + CONSOLE_ARG_SIZE] = '\0'; | |
| } else { | |
| sprintf(buf, "%s %s", cmdline, NULL_CONSOLE); | |
| } | |
| if (buf + strlen(buf) >= cmdline) | |
| return -ENOSPC; | |
| } else { | |
| if (maxlen < CONSOLE_ARG_SIZE) | |
| return -ENOSPC; | |
| strcpy(buf, NULL_CONSOLE); | |
| } | |
| debug("after silent fix-up: %s\n", buf); | |
| return 0; | |
| } | |
| /** | |
| * process_subst() - Handle substitution of ${...} fields in the environment | |
| * | |
| * Handle variable substitution in the provided buffer | |
| * | |
| * @buf: Buffer containing the string to process | |
| * @maxlen: Maximum length of buffer | |
| * Return: 0 if OK, -ENOSPC if @maxlen is too small | |
| */ | |
| static int process_subst(char *buf, int maxlen) | |
| { | |
| char *cmdline; | |
| int size; | |
| int ret; | |
| /* Move to end of buffer */ | |
| size = strlen(buf) + 1; | |
| cmdline = buf + maxlen - size; | |
| if (buf + size > cmdline) | |
| return -ENOSPC; | |
| memmove(cmdline, buf, size); | |
| ret = cli_simple_process_macros(cmdline, buf, cmdline - buf); | |
| return ret; | |
| } | |
| int bootm_process_cmdline(char *buf, int maxlen, int flags) | |
| { | |
| int ret; | |
| /* Check config first to enable compiler to eliminate code */ | |
| if (IS_ENABLED(CONFIG_SILENT_CONSOLE) && | |
| !IS_ENABLED(CONFIG_SILENT_U_BOOT_ONLY) && | |
| (flags & BOOTM_CL_SILENT)) { | |
| ret = fixup_silent_linux(buf, maxlen); | |
| if (ret) | |
| return log_msg_ret("silent", ret); | |
| } | |
| if (IS_ENABLED(CONFIG_BOOTARGS_SUBST) && IS_ENABLED(CONFIG_CMDLINE) && | |
| (flags & BOOTM_CL_SUBST)) { | |
| ret = process_subst(buf, maxlen); | |
| if (ret) | |
| return log_msg_ret("subst", ret); | |
| } | |
| return 0; | |
| } | |
| int bootm_process_cmdline_env(int flags) | |
| { | |
| const int maxlen = MAX_CMDLINE_SIZE; | |
| bool do_silent; | |
| const char *env; | |
| char *buf; | |
| int ret; | |
| /* First check if any action is needed */ | |
| do_silent = IS_ENABLED(CONFIG_SILENT_CONSOLE) && | |
| !IS_ENABLED(CONFIG_SILENT_U_BOOT_ONLY) && (flags & BOOTM_CL_SILENT); | |
| if (!do_silent && !IS_ENABLED(CONFIG_BOOTARGS_SUBST)) | |
| return 0; | |
| env = env_get("bootargs"); | |
| if (env && strlen(env) >= maxlen) | |
| return -E2BIG; | |
| buf = malloc(maxlen); | |
| if (!buf) | |
| return -ENOMEM; | |
| if (env) | |
| strcpy(buf, env); | |
| else | |
| *buf = '\0'; | |
| ret = bootm_process_cmdline(buf, maxlen, flags); | |
| if (!ret) { | |
| ret = env_set("bootargs", buf); | |
| /* | |
| * If buf is "" and bootargs does not exist, this will produce | |
| * an error trying to delete bootargs. Ignore it | |
| */ | |
| if (ret == -ENOENT) | |
| ret = 0; | |
| } | |
| free(buf); | |
| if (ret) | |
| return log_msg_ret("env", ret); | |
| return 0; | |
| } | |
| int bootm_measure(struct bootm_headers *images) | |
| { | |
| int ret = 0; | |
| /* Skip measurement if EFI is going to do it */ | |
| if (images->os.os == IH_OS_EFI && | |
| IS_ENABLED(CONFIG_EFI_TCG2_PROTOCOL) && | |
| IS_ENABLED(CONFIG_BOOTM_EFI)) | |
| return ret; | |
| if (IS_ENABLED(CONFIG_MEASURED_BOOT)) { | |
| struct tcg2_event_log elog; | |
| struct udevice *dev; | |
| void *initrd_buf; | |
| void *image_buf; | |
| const char *s; | |
| u32 rd_len; | |
| bool ign; | |
| elog.log_size = 0; | |
| ign = IS_ENABLED(CONFIG_MEASURE_IGNORE_LOG); | |
| ret = tcg2_measurement_init(&dev, &elog, ign); | |
| if (ret) | |
| return ret; | |
| image_buf = map_sysmem(images->os.image_start, | |
| images->os.image_len); | |
| ret = tcg2_measure_data(dev, &elog, 8, images->os.image_len, | |
| image_buf, EV_COMPACT_HASH, | |
| strlen("linux") + 1, (u8 *)"linux"); | |
| if (ret) | |
| goto unmap_image; | |
| rd_len = images->rd_end - images->rd_start; | |
| initrd_buf = map_sysmem(images->rd_start, rd_len); | |
| ret = tcg2_measure_data(dev, &elog, 9, rd_len, initrd_buf, | |
| EV_COMPACT_HASH, strlen("initrd") + 1, | |
| (u8 *)"initrd"); | |
| if (ret) | |
| goto unmap_initrd; | |
| if (IS_ENABLED(CONFIG_MEASURE_DEVICETREE)) { | |
| ret = tcg2_measure_data(dev, &elog, 1, images->ft_len, | |
| (u8 *)images->ft_addr, | |
| EV_TABLE_OF_DEVICES, | |
| strlen("dts") + 1, | |
| (u8 *)"dts"); | |
| if (ret) | |
| goto unmap_initrd; | |
| } | |
| s = env_get("bootargs"); | |
| if (!s) | |
| s = ""; | |
| ret = tcg2_measure_data(dev, &elog, 1, strlen(s) + 1, (u8 *)s, | |
| EV_PLATFORM_CONFIG_FLAGS, | |
| strlen(s) + 1, (u8 *)s); | |
| unmap_initrd: | |
| unmap_sysmem(initrd_buf); | |
| unmap_image: | |
| unmap_sysmem(image_buf); | |
| tcg2_measurement_term(dev, &elog, ret != 0); | |
| } | |
| return ret; | |
| } | |
| int bootm_run_states(struct bootm_info *bmi, int states) | |
| { | |
| struct bootm_headers *images = bmi->images; | |
| boot_os_fn *boot_fn; | |
| ulong iflag = 0; | |
| int ret = 0, need_boot_fn; | |
| images->state |= states; | |
| /* | |
| * Work through the states and see how far we get. We stop on | |
| * any error. | |
| */ | |
| if (states & BOOTM_STATE_START) | |
| ret = bootm_start(); | |
| if (!ret && (states & BOOTM_STATE_PRE_LOAD)) | |
| ret = bootm_pre_load(bmi->addr_img); | |
| if (!ret && (states & BOOTM_STATE_FINDOS)) | |
| ret = bootm_find_os(bmi->cmd_name, bmi->addr_img); | |
| if (!ret && (states & BOOTM_STATE_FINDOTHER)) { | |
| ulong img_addr; | |
| img_addr = bmi->addr_img ? hextoul(bmi->addr_img, NULL) | |
| : image_load_addr; | |
| ret = bootm_find_other(img_addr, bmi->conf_ramdisk, | |
| bmi->conf_fdt); | |
| } | |
| if (IS_ENABLED(CONFIG_MEASURED_BOOT) && !ret && | |
| (states & BOOTM_STATE_MEASURE)) | |
| bootm_measure(images); | |
| /* Load the OS */ | |
| if (!ret && (states & BOOTM_STATE_LOADOS)) { | |
| iflag = bootm_disable_interrupts(); | |
| ret = bootm_load_os(images, 0); | |
| if (ret && ret != BOOTM_ERR_OVERLAP) | |
| goto err; | |
| else if (ret == BOOTM_ERR_OVERLAP) | |
| ret = 0; | |
| } | |
| /* Relocate the ramdisk */ | |
| #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH | |
| if (!ret && (states & BOOTM_STATE_RAMDISK)) { | |
| ulong rd_len = images->rd_end - images->rd_start; | |
| ret = boot_ramdisk_high(images->rd_start, rd_len, | |
| &images->initrd_start, | |
| &images->initrd_end); | |
| if (!ret) { | |
| env_set_hex("initrd_start", images->initrd_start); | |
| env_set_hex("initrd_end", images->initrd_end); | |
| } | |
| } | |
| #endif | |
| #if CONFIG_IS_ENABLED(OF_LIBFDT) && CONFIG_IS_ENABLED(LMB) | |
| if (!ret && (states & BOOTM_STATE_FDT)) { | |
| boot_fdt_add_mem_rsv_regions(images->ft_addr); | |
| ret = boot_relocate_fdt(&images->ft_addr, &images->ft_len); | |
| } | |
| #endif | |
| /* From now on, we need the OS boot function */ | |
| if (ret) | |
| return ret; | |
| boot_fn = bootm_os_get_boot_func(images->os.os); | |
| need_boot_fn = states & (BOOTM_STATE_OS_CMDLINE | | |
| BOOTM_STATE_OS_BD_T | BOOTM_STATE_OS_PREP | | |
| BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO); | |
| if (boot_fn == NULL && need_boot_fn) { | |
| if (iflag) | |
| enable_interrupts(); | |
| printf("ERROR: booting os '%s' (%d) is not supported\n", | |
| genimg_get_os_name(images->os.os), images->os.os); | |
| bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS); | |
| return 1; | |
| } | |
| /* Call various other states that are not generally used */ | |
| if (!ret && (states & BOOTM_STATE_OS_CMDLINE)) | |
| ret = boot_fn(BOOTM_STATE_OS_CMDLINE, bmi); | |
| if (!ret && (states & BOOTM_STATE_OS_BD_T)) | |
| ret = boot_fn(BOOTM_STATE_OS_BD_T, bmi); | |
| if (!ret && (states & BOOTM_STATE_OS_PREP)) { | |
| int flags = 0; | |
| /* For Linux OS do all substitutions at console processing */ | |
| if (images->os.os == IH_OS_LINUX) | |
| flags = BOOTM_CL_ALL; | |
| ret = bootm_process_cmdline_env(flags); | |
| if (ret) { | |
| printf("Cmdline setup failed (err=%d)\n", ret); | |
| ret = CMD_RET_FAILURE; | |
| goto err; | |
| } | |
| ret = boot_fn(BOOTM_STATE_OS_PREP, bmi); | |
| } | |
| #ifdef CONFIG_TRACE | |
| /* Pretend to run the OS, then run a user command */ | |
| if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) { | |
| char *cmd_list = env_get("fakegocmd"); | |
| ret = boot_selected_os(BOOTM_STATE_OS_FAKE_GO, bmi, boot_fn); | |
| if (!ret && cmd_list) | |
| ret = run_command_list(cmd_list, -1, 0); | |
| } | |
| #endif | |
| /* Check for unsupported subcommand. */ | |
| if (ret) { | |
| printf("subcommand failed (err=%d)\n", ret); | |
| return ret; | |
| } | |
| /* Now run the OS! We hope this doesn't return */ | |
| if (!ret && (states & BOOTM_STATE_OS_GO)) | |
| ret = boot_selected_os(BOOTM_STATE_OS_GO, bmi, boot_fn); | |
| /* Deal with any fallout */ | |
| err: | |
| if (iflag) | |
| enable_interrupts(); | |
| if (ret == BOOTM_ERR_UNIMPLEMENTED) { | |
| bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL); | |
| } else if (ret == BOOTM_ERR_RESET) { | |
| printf("Resetting the board...\n"); | |
| reset_cpu(); | |
| } | |
| return ret; | |
| } | |
| int boot_run(struct bootm_info *bmi, const char *cmd, int extra_states) | |
| { | |
| int states; | |
| bmi->cmd_name = cmd; | |
| states = BOOTM_STATE_MEASURE | BOOTM_STATE_OS_PREP | | |
| BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO; | |
| if (IS_ENABLED(CONFIG_SYS_BOOT_RAMDISK_HIGH)) | |
| states |= BOOTM_STATE_RAMDISK; | |
| states |= extra_states; | |
| return bootm_run_states(bmi, states); | |
| } | |
| int bootm_run(struct bootm_info *bmi) | |
| { | |
| return boot_run(bmi, "bootm", BOOTM_STATE_START | BOOTM_STATE_FINDOS | | |
| BOOTM_STATE_PRE_LOAD | BOOTM_STATE_FINDOTHER | | |
| BOOTM_STATE_LOADOS); | |
| } | |
| int bootz_run(struct bootm_info *bmi) | |
| { | |
| return boot_run(bmi, "bootz", 0); | |
| } | |
| int booti_run(struct bootm_info *bmi) | |
| { | |
| return boot_run(bmi, "booti", 0); | |
| } | |
| int bootm_boot_start(ulong addr, const char *cmdline) | |
| { | |
| char addr_str[30]; | |
| struct bootm_info bmi; | |
| int states; | |
| int ret; | |
| states = BOOTM_STATE_START | BOOTM_STATE_FINDOS | BOOTM_STATE_PRE_LOAD | | |
| BOOTM_STATE_FINDOTHER | BOOTM_STATE_LOADOS | | |
| BOOTM_STATE_OS_PREP | BOOTM_STATE_OS_FAKE_GO | | |
| BOOTM_STATE_OS_GO; | |
| if (IS_ENABLED(CONFIG_SYS_BOOT_RAMDISK_HIGH)) | |
| states |= BOOTM_STATE_RAMDISK; | |
| if (IS_ENABLED(CONFIG_PPC) || IS_ENABLED(CONFIG_MIPS)) | |
| states |= BOOTM_STATE_OS_CMDLINE; | |
| images.state |= states; | |
| snprintf(addr_str, sizeof(addr_str), "%lx", addr); | |
| ret = env_set("bootargs", cmdline); | |
| if (ret) { | |
| printf("Failed to set cmdline\n"); | |
| return ret; | |
| } | |
| bootm_init(&bmi); | |
| bmi.addr_img = addr_str; | |
| bmi.cmd_name = "bootm"; | |
| ret = bootm_run_states(&bmi, states); | |
| return ret; | |
| } | |
| void bootm_init(struct bootm_info *bmi) | |
| { | |
| memset(bmi, '\0', sizeof(struct bootm_info)); | |
| bmi->boot_progress = true; | |
| bmi->images = &images; | |
| } | |
| /** | |
| * switch_to_non_secure_mode() - switch to non-secure mode | |
| * | |
| * This routine is overridden by architectures requiring this feature. | |
| */ | |
| void __weak switch_to_non_secure_mode(void) | |
| { | |
| } | |
| void bootm_final(int flag) | |
| { | |
| printf("\nStarting kernel ...%s\n\n", | |
| (flag & BOOTM_STATE_OS_FAKE_GO) ? | |
| " (fake run for tracing)" : ""); | |
| bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel"); | |
| if (IS_ENABLED(CONFIG_BOOTSTAGE_FDT) && IS_ENABLED(CONFIG_CMD_FDT)) | |
| bootstage_fdt_add_report(); | |
| bootstage_stash_default(); | |
| if (IS_ENABLED(CONFIG_BOOTSTAGE_REPORT)) | |
| bootstage_report(); | |
| board_quiesce_devices(); | |
| /* | |
| * Call remove function of all devices with a removal flag set. | |
| * This may be useful for last-stage operations, like cancelling | |
| * of DMA operation or releasing device internal buffers. | |
| */ | |
| dm_remove_devices_active(); | |
| } | |
| #else /* USE_HOSTCC */ | |
| #if defined(CONFIG_FIT_SIGNATURE) | |
| static int bootm_host_load_image(const void *fit, int req_image_type, | |
| int cfg_noffset) | |
| { | |
| const char *fit_uname_config = NULL; | |
| ulong data, len; | |
| struct bootm_headers images; | |
| int noffset; | |
| ulong load_end, buf_size; | |
| uint8_t image_type; | |
| uint8_t image_comp; | |
| void *load_buf; | |
| int ret; | |
| fit_uname_config = fdt_get_name(fit, cfg_noffset, NULL); | |
| memset(&images, '\0', sizeof(images)); | |
| images.verify = 1; | |
| noffset = fit_image_load(&images, (ulong)fit, | |
| NULL, &fit_uname_config, | |
| IH_ARCH_DEFAULT, req_image_type, -1, | |
| FIT_LOAD_IGNORED, &data, &len); | |
| if (noffset < 0) | |
| return noffset; | |
| if (fit_image_get_type(fit, noffset, &image_type)) { | |
| puts("Can't get image type!\n"); | |
| return -EINVAL; | |
| } | |
| if (fit_image_get_comp(fit, noffset, &image_comp)) | |
| image_comp = IH_COMP_NONE; | |
| /* Allow the image to expand by a factor of 4, should be safe */ | |
| buf_size = (1 << 20) + len * 4; | |
| load_buf = malloc(buf_size); | |
| ret = image_decomp(image_comp, 0, data, image_type, load_buf, | |
| (void *)data, len, buf_size, &load_end); | |
| free(load_buf); | |
| if (ret) { | |
| ret = handle_decomp_error(image_comp, load_end - 0, buf_size, ret); | |
| if (ret != BOOTM_ERR_UNIMPLEMENTED) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| int bootm_host_load_images(const void *fit, int cfg_noffset) | |
| { | |
| static uint8_t image_types[] = { | |
| IH_TYPE_KERNEL, | |
| IH_TYPE_FLATDT, | |
| IH_TYPE_RAMDISK, | |
| }; | |
| int err = 0; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(image_types); i++) { | |
| int ret; | |
| ret = bootm_host_load_image(fit, image_types[i], cfg_noffset); | |
| if (!err && ret && ret != -ENOENT) | |
| err = ret; | |
| } | |
| /* Return the first error we found */ | |
| return err; | |
| } | |
| #endif | |
| #endif /* ndef USE_HOSTCC */ |