| /* | |
| * (C) Copyright 2001 | |
| * Denis Peter, MPL AG Switzerland | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <dm.h> | |
| #include <inttypes.h> | |
| #include <pci.h> | |
| #include <scsi.h> | |
| #include <dm/device-internal.h> | |
| #include <dm/uclass-internal.h> | |
| #if !defined(CONFIG_DM_SCSI) | |
| #ifdef CONFIG_SCSI_DEV_LIST | |
| #define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST | |
| #else | |
| #ifdef CONFIG_SCSI_SYM53C8XX | |
| #define SCSI_VEND_ID 0x1000 | |
| #ifndef CONFIG_SCSI_DEV_ID | |
| #define SCSI_DEV_ID 0x0001 | |
| #else | |
| #define SCSI_DEV_ID CONFIG_SCSI_DEV_ID | |
| #endif | |
| #elif defined CONFIG_SATA_ULI5288 | |
| #define SCSI_VEND_ID 0x10b9 | |
| #define SCSI_DEV_ID 0x5288 | |
| #elif !defined(CONFIG_SCSI_AHCI_PLAT) | |
| #error no scsi device defined | |
| #endif | |
| #define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} | |
| #endif | |
| #endif | |
| #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) | |
| const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; | |
| #endif | |
| static ccb tempccb; /* temporary scsi command buffer */ | |
| static unsigned char tempbuff[512]; /* temporary data buffer */ | |
| #if !defined(CONFIG_DM_SCSI) | |
| static int scsi_max_devs; /* number of highest available scsi device */ | |
| static int scsi_curr_dev; /* current device */ | |
| static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; | |
| #endif | |
| /* almost the maximum amount of the scsi_ext command.. */ | |
| #define SCSI_MAX_READ_BLK 0xFFFF | |
| #define SCSI_LBA48_READ 0xFFFFFFF | |
| #ifdef CONFIG_SYS_64BIT_LBA | |
| void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks) | |
| { | |
| pccb->cmd[0] = SCSI_READ16; | |
| pccb->cmd[1] = pccb->lun << 5; | |
| pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff; | |
| pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff; | |
| pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff; | |
| pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff; | |
| pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff; | |
| pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff; | |
| pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff; | |
| pccb->cmd[9] = (unsigned char)start & 0xff; | |
| pccb->cmd[10] = 0; | |
| pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff; | |
| pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff; | |
| pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff; | |
| pccb->cmd[14] = (unsigned char)blocks & 0xff; | |
| pccb->cmd[15] = 0; | |
| pccb->cmdlen = 16; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n", | |
| pccb->cmd[0], pccb->cmd[1], | |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
| pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], | |
| pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); | |
| } | |
| #endif | |
| static void scsi_setup_read_ext(ccb *pccb, lbaint_t start, | |
| unsigned short blocks) | |
| { | |
| pccb->cmd[0] = SCSI_READ10; | |
| pccb->cmd[1] = pccb->lun << 5; | |
| pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; | |
| pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; | |
| pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; | |
| pccb->cmd[5] = (unsigned char)start & 0xff; | |
| pccb->cmd[6] = 0; | |
| pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff; | |
| pccb->cmd[8] = (unsigned char)blocks & 0xff; | |
| pccb->cmd[6] = 0; | |
| pccb->cmdlen = 10; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", | |
| pccb->cmd[0], pccb->cmd[1], | |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
| pccb->cmd[7], pccb->cmd[8]); | |
| } | |
| static void scsi_setup_write_ext(ccb *pccb, lbaint_t start, | |
| unsigned short blocks) | |
| { | |
| pccb->cmd[0] = SCSI_WRITE10; | |
| pccb->cmd[1] = pccb->lun << 5; | |
| pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; | |
| pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; | |
| pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; | |
| pccb->cmd[5] = (unsigned char)start & 0xff; | |
| pccb->cmd[6] = 0; | |
| pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff; | |
| pccb->cmd[8] = (unsigned char)blocks & 0xff; | |
| pccb->cmd[9] = 0; | |
| pccb->cmdlen = 10; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", | |
| __func__, | |
| pccb->cmd[0], pccb->cmd[1], | |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
| pccb->cmd[7], pccb->cmd[8]); | |
| } | |
| static void scsi_setup_inquiry(ccb *pccb) | |
| { | |
| pccb->cmd[0] = SCSI_INQUIRY; | |
| pccb->cmd[1] = pccb->lun << 5; | |
| pccb->cmd[2] = 0; | |
| pccb->cmd[3] = 0; | |
| if (pccb->datalen > 255) | |
| pccb->cmd[4] = 255; | |
| else | |
| pccb->cmd[4] = (unsigned char)pccb->datalen; | |
| pccb->cmd[5] = 0; | |
| pccb->cmdlen = 6; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| } | |
| #ifdef CONFIG_BLK | |
| static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, | |
| void *buffer) | |
| #else | |
| static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, | |
| lbaint_t blkcnt, void *buffer) | |
| #endif | |
| { | |
| #ifdef CONFIG_BLK | |
| struct blk_desc *block_dev = dev_get_uclass_platdata(dev); | |
| #endif | |
| lbaint_t start, blks; | |
| uintptr_t buf_addr; | |
| unsigned short smallblks = 0; | |
| ccb *pccb = (ccb *)&tempccb; | |
| /* Setup device */ | |
| pccb->target = block_dev->target; | |
| pccb->lun = block_dev->lun; | |
| buf_addr = (unsigned long)buffer; | |
| start = blknr; | |
| blks = blkcnt; | |
| debug("\nscsi_read: dev %d startblk " LBAF | |
| ", blccnt " LBAF " buffer %lx\n", | |
| block_dev->devnum, start, blks, (unsigned long)buffer); | |
| do { | |
| pccb->pdata = (unsigned char *)buf_addr; | |
| #ifdef CONFIG_SYS_64BIT_LBA | |
| if (start > SCSI_LBA48_READ) { | |
| unsigned long blocks; | |
| blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); | |
| pccb->datalen = block_dev->blksz * blocks; | |
| scsi_setup_read16(pccb, start, blocks); | |
| start += blocks; | |
| blks -= blocks; | |
| } else | |
| #endif | |
| if (blks > SCSI_MAX_READ_BLK) { | |
| pccb->datalen = block_dev->blksz * | |
| SCSI_MAX_READ_BLK; | |
| smallblks = SCSI_MAX_READ_BLK; | |
| scsi_setup_read_ext(pccb, start, smallblks); | |
| start += SCSI_MAX_READ_BLK; | |
| blks -= SCSI_MAX_READ_BLK; | |
| } else { | |
| pccb->datalen = block_dev->blksz * blks; | |
| smallblks = (unsigned short)blks; | |
| scsi_setup_read_ext(pccb, start, smallblks); | |
| start += blks; | |
| blks = 0; | |
| } | |
| debug("scsi_read_ext: startblk " LBAF | |
| ", blccnt %x buffer %" PRIXPTR "\n", | |
| start, smallblks, buf_addr); | |
| if (scsi_exec(pccb) != true) { | |
| scsi_print_error(pccb); | |
| blkcnt -= blks; | |
| break; | |
| } | |
| buf_addr += pccb->datalen; | |
| } while (blks != 0); | |
| debug("scsi_read_ext: end startblk " LBAF | |
| ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); | |
| return blkcnt; | |
| } | |
| /******************************************************************************* | |
| * scsi_write | |
| */ | |
| /* Almost the maximum amount of the scsi_ext command.. */ | |
| #define SCSI_MAX_WRITE_BLK 0xFFFF | |
| #ifdef CONFIG_BLK | |
| static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, | |
| const void *buffer) | |
| #else | |
| static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, | |
| lbaint_t blkcnt, const void *buffer) | |
| #endif | |
| { | |
| #ifdef CONFIG_BLK | |
| struct blk_desc *block_dev = dev_get_uclass_platdata(dev); | |
| #endif | |
| lbaint_t start, blks; | |
| uintptr_t buf_addr; | |
| unsigned short smallblks; | |
| ccb *pccb = (ccb *)&tempccb; | |
| /* Setup device */ | |
| pccb->target = block_dev->target; | |
| pccb->lun = block_dev->lun; | |
| buf_addr = (unsigned long)buffer; | |
| start = blknr; | |
| blks = blkcnt; | |
| debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", | |
| __func__, block_dev->devnum, start, blks, (unsigned long)buffer); | |
| do { | |
| pccb->pdata = (unsigned char *)buf_addr; | |
| if (blks > SCSI_MAX_WRITE_BLK) { | |
| pccb->datalen = (block_dev->blksz * | |
| SCSI_MAX_WRITE_BLK); | |
| smallblks = SCSI_MAX_WRITE_BLK; | |
| scsi_setup_write_ext(pccb, start, smallblks); | |
| start += SCSI_MAX_WRITE_BLK; | |
| blks -= SCSI_MAX_WRITE_BLK; | |
| } else { | |
| pccb->datalen = block_dev->blksz * blks; | |
| smallblks = (unsigned short)blks; | |
| scsi_setup_write_ext(pccb, start, smallblks); | |
| start += blks; | |
| blks = 0; | |
| } | |
| debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", | |
| __func__, start, smallblks, buf_addr); | |
| if (scsi_exec(pccb) != true) { | |
| scsi_print_error(pccb); | |
| blkcnt -= blks; | |
| break; | |
| } | |
| buf_addr += pccb->datalen; | |
| } while (blks != 0); | |
| debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", | |
| __func__, start, smallblks, buf_addr); | |
| return blkcnt; | |
| } | |
| #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) | |
| void scsi_init(void) | |
| { | |
| int busdevfunc = -1; | |
| int i; | |
| /* | |
| * Find a device from the list, this driver will support a single | |
| * controller. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { | |
| /* get PCI Device ID */ | |
| #ifdef CONFIG_DM_PCI | |
| struct udevice *dev; | |
| int ret; | |
| ret = dm_pci_find_device(scsi_device_list[i].vendor, | |
| scsi_device_list[i].device, 0, &dev); | |
| if (!ret) { | |
| busdevfunc = dm_pci_get_bdf(dev); | |
| break; | |
| } | |
| #else | |
| busdevfunc = pci_find_device(scsi_device_list[i].vendor, | |
| scsi_device_list[i].device, | |
| 0); | |
| #endif | |
| if (busdevfunc != -1) | |
| break; | |
| } | |
| if (busdevfunc == -1) { | |
| printf("Error: SCSI Controller(s) "); | |
| for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { | |
| printf("%04X:%04X ", | |
| scsi_device_list[i].vendor, | |
| scsi_device_list[i].device); | |
| } | |
| printf("not found\n"); | |
| return; | |
| } | |
| #ifdef DEBUG | |
| else { | |
| printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", | |
| scsi_device_list[i].vendor, | |
| scsi_device_list[i].device, | |
| (busdevfunc >> 16) & 0xFF, | |
| (busdevfunc >> 11) & 0x1F, | |
| (busdevfunc >> 8) & 0x7); | |
| } | |
| #endif | |
| bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); | |
| scsi_low_level_init(busdevfunc); | |
| scsi_scan(1); | |
| bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); | |
| } | |
| #endif | |
| /* copy src to dest, skipping leading and trailing blanks | |
| * and null terminate the string | |
| */ | |
| static void scsi_ident_cpy(unsigned char *dest, unsigned char *src, | |
| unsigned int len) | |
| { | |
| int start, end; | |
| start = 0; | |
| while (start < len) { | |
| if (src[start] != ' ') | |
| break; | |
| start++; | |
| } | |
| end = len-1; | |
| while (end > start) { | |
| if (src[end] != ' ') | |
| break; | |
| end--; | |
| } | |
| for (; start <= end; start++) | |
| *dest ++= src[start]; | |
| *dest = '\0'; | |
| } | |
| static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, | |
| unsigned long *blksz) | |
| { | |
| *capacity = 0; | |
| memset(pccb->cmd, '\0', sizeof(pccb->cmd)); | |
| pccb->cmd[0] = SCSI_RD_CAPAC10; | |
| pccb->cmd[1] = pccb->lun << 5; | |
| pccb->cmdlen = 10; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| pccb->datalen = 8; | |
| if (scsi_exec(pccb) != true) | |
| return 1; | |
| *capacity = ((lbaint_t)pccb->pdata[0] << 24) | | |
| ((lbaint_t)pccb->pdata[1] << 16) | | |
| ((lbaint_t)pccb->pdata[2] << 8) | | |
| ((lbaint_t)pccb->pdata[3]); | |
| if (*capacity != 0xffffffff) { | |
| /* Read capacity (10) was sufficient for this drive. */ | |
| *blksz = ((unsigned long)pccb->pdata[4] << 24) | | |
| ((unsigned long)pccb->pdata[5] << 16) | | |
| ((unsigned long)pccb->pdata[6] << 8) | | |
| ((unsigned long)pccb->pdata[7]); | |
| return 0; | |
| } | |
| /* Read capacity (10) was insufficient. Use read capacity (16). */ | |
| memset(pccb->cmd, '\0', sizeof(pccb->cmd)); | |
| pccb->cmd[0] = SCSI_RD_CAPAC16; | |
| pccb->cmd[1] = 0x10; | |
| pccb->cmdlen = 16; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| pccb->datalen = 16; | |
| if (scsi_exec(pccb) != true) | |
| return 1; | |
| *capacity = ((uint64_t)pccb->pdata[0] << 56) | | |
| ((uint64_t)pccb->pdata[1] << 48) | | |
| ((uint64_t)pccb->pdata[2] << 40) | | |
| ((uint64_t)pccb->pdata[3] << 32) | | |
| ((uint64_t)pccb->pdata[4] << 24) | | |
| ((uint64_t)pccb->pdata[5] << 16) | | |
| ((uint64_t)pccb->pdata[6] << 8) | | |
| ((uint64_t)pccb->pdata[7]); | |
| *blksz = ((uint64_t)pccb->pdata[8] << 56) | | |
| ((uint64_t)pccb->pdata[9] << 48) | | |
| ((uint64_t)pccb->pdata[10] << 40) | | |
| ((uint64_t)pccb->pdata[11] << 32) | | |
| ((uint64_t)pccb->pdata[12] << 24) | | |
| ((uint64_t)pccb->pdata[13] << 16) | | |
| ((uint64_t)pccb->pdata[14] << 8) | | |
| ((uint64_t)pccb->pdata[15]); | |
| return 0; | |
| } | |
| /* | |
| * Some setup (fill-in) routines | |
| */ | |
| static void scsi_setup_test_unit_ready(ccb *pccb) | |
| { | |
| pccb->cmd[0] = SCSI_TST_U_RDY; | |
| pccb->cmd[1] = pccb->lun << 5; | |
| pccb->cmd[2] = 0; | |
| pccb->cmd[3] = 0; | |
| pccb->cmd[4] = 0; | |
| pccb->cmd[5] = 0; | |
| pccb->cmdlen = 6; | |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
| } | |
| /** | |
| * scsi_init_dev_desc_priv - initialize only SCSI specific blk_desc properties | |
| * | |
| * @dev_desc: Block device description pointer | |
| */ | |
| static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc) | |
| { | |
| dev_desc->target = 0xff; | |
| dev_desc->lun = 0xff; | |
| dev_desc->log2blksz = | |
| LOG2_INVALID(typeof(dev_desc->log2blksz)); | |
| dev_desc->type = DEV_TYPE_UNKNOWN; | |
| dev_desc->vendor[0] = 0; | |
| dev_desc->product[0] = 0; | |
| dev_desc->revision[0] = 0; | |
| dev_desc->removable = false; | |
| #ifndef CONFIG_BLK | |
| dev_desc->block_read = scsi_read; | |
| dev_desc->block_write = scsi_write; | |
| #endif | |
| } | |
| #if !defined(CONFIG_DM_SCSI) | |
| /** | |
| * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties | |
| * | |
| * @dev_desc: Block device description pointer | |
| * @devnum: Device number | |
| */ | |
| static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum) | |
| { | |
| dev_desc->lba = 0; | |
| dev_desc->blksz = 0; | |
| dev_desc->if_type = IF_TYPE_SCSI; | |
| dev_desc->devnum = devnum; | |
| dev_desc->part_type = PART_TYPE_UNKNOWN; | |
| scsi_init_dev_desc_priv(dev_desc); | |
| } | |
| #endif | |
| /** | |
| * scsi_detect_dev - Detect scsi device | |
| * | |
| * @target: target id | |
| * @lun: target lun | |
| * @dev_desc: block device description | |
| * | |
| * The scsi_detect_dev detects and fills a dev_desc structure when the device is | |
| * detected. | |
| * | |
| * Return: 0 on success, error value otherwise | |
| */ | |
| static int scsi_detect_dev(int target, int lun, struct blk_desc *dev_desc) | |
| { | |
| unsigned char perq, modi; | |
| lbaint_t capacity; | |
| unsigned long blksz; | |
| ccb *pccb = (ccb *)&tempccb; | |
| pccb->target = target; | |
| pccb->lun = lun; | |
| pccb->pdata = (unsigned char *)&tempbuff; | |
| pccb->datalen = 512; | |
| scsi_setup_inquiry(pccb); | |
| if (scsi_exec(pccb) != true) { | |
| if (pccb->contr_stat == SCSI_SEL_TIME_OUT) { | |
| /* | |
| * selection timeout => assuming no | |
| * device present | |
| */ | |
| debug("Selection timeout ID %d\n", | |
| pccb->target); | |
| return -ETIMEDOUT; | |
| } | |
| scsi_print_error(pccb); | |
| return -ENODEV; | |
| } | |
| perq = tempbuff[0]; | |
| modi = tempbuff[1]; | |
| if ((perq & 0x1f) == 0x1f) | |
| return -ENODEV; /* skip unknown devices */ | |
| if ((modi & 0x80) == 0x80) /* drive is removable */ | |
| dev_desc->removable = true; | |
| /* get info for this device */ | |
| scsi_ident_cpy((unsigned char *)dev_desc->vendor, | |
| &tempbuff[8], 8); | |
| scsi_ident_cpy((unsigned char *)dev_desc->product, | |
| &tempbuff[16], 16); | |
| scsi_ident_cpy((unsigned char *)dev_desc->revision, | |
| &tempbuff[32], 4); | |
| dev_desc->target = pccb->target; | |
| dev_desc->lun = pccb->lun; | |
| pccb->datalen = 0; | |
| scsi_setup_test_unit_ready(pccb); | |
| if (scsi_exec(pccb) != true) { | |
| if (dev_desc->removable) { | |
| dev_desc->type = perq; | |
| goto removable; | |
| } | |
| scsi_print_error(pccb); | |
| return -EINVAL; | |
| } | |
| if (scsi_read_capacity(pccb, &capacity, &blksz)) { | |
| scsi_print_error(pccb); | |
| return -EINVAL; | |
| } | |
| dev_desc->lba = capacity; | |
| dev_desc->blksz = blksz; | |
| dev_desc->log2blksz = LOG2(dev_desc->blksz); | |
| dev_desc->type = perq; | |
| removable: | |
| return 0; | |
| } | |
| /* | |
| * (re)-scan the scsi bus and reports scsi device info | |
| * to the user if mode = 1 | |
| */ | |
| #if defined(CONFIG_DM_SCSI) | |
| int scsi_scan(int mode) | |
| { | |
| unsigned char i, lun; | |
| struct uclass *uc; | |
| struct udevice *dev; /* SCSI controller */ | |
| int ret; | |
| if (mode == 1) | |
| printf("scanning bus for devices...\n"); | |
| blk_unbind_all(IF_TYPE_SCSI); | |
| ret = uclass_get(UCLASS_SCSI, &uc); | |
| if (ret) | |
| return ret; | |
| uclass_foreach_dev(dev, uc) { | |
| struct scsi_platdata *plat; /* scsi controller platdata */ | |
| /* probe SCSI controller driver */ | |
| ret = device_probe(dev); | |
| if (ret) | |
| return ret; | |
| /* Get controller platdata */ | |
| plat = dev_get_platdata(dev); | |
| for (i = 0; i < plat->max_id; i++) { | |
| for (lun = 0; lun < plat->max_lun; lun++) { | |
| struct udevice *bdev; /* block device */ | |
| /* block device description */ | |
| struct blk_desc _bd; | |
| struct blk_desc *bdesc; | |
| char str[10]; | |
| scsi_init_dev_desc_priv(&_bd); | |
| ret = scsi_detect_dev(i, lun, &_bd); | |
| if (ret) | |
| /* | |
| * no device detected? | |
| * check the next lun. | |
| */ | |
| continue; | |
| /* | |
| * Create only one block device and do detection | |
| * to make sure that there won't be a lot of | |
| * block devices created | |
| */ | |
| snprintf(str, sizeof(str), "id%dlun%d", i, lun); | |
| ret = blk_create_devicef(dev, "scsi_blk", | |
| str, IF_TYPE_SCSI, | |
| -1, | |
| _bd.blksz, | |
| _bd.blksz * _bd.lba, | |
| &bdev); | |
| if (ret) { | |
| debug("Can't create device\n"); | |
| return ret; | |
| } | |
| bdesc = dev_get_uclass_platdata(bdev); | |
| bdesc->target = i; | |
| bdesc->lun = lun; | |
| bdesc->removable = _bd.removable; | |
| bdesc->type = _bd.type; | |
| memcpy(&bdesc->vendor, &_bd.vendor, | |
| sizeof(_bd.vendor)); | |
| memcpy(&bdesc->product, &_bd.product, | |
| sizeof(_bd.product)); | |
| memcpy(&bdesc->revision, &_bd.revision, | |
| sizeof(_bd.revision)); | |
| part_init(bdesc); | |
| if (mode == 1) { | |
| printf(" Device %d: ", 0); | |
| dev_print(bdesc); | |
| } /* if mode */ | |
| } /* next LUN */ | |
| } | |
| } | |
| return 0; | |
| } | |
| #else | |
| int scsi_scan(int mode) | |
| { | |
| unsigned char i, lun; | |
| int ret; | |
| if (mode == 1) | |
| printf("scanning bus for devices...\n"); | |
| for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) | |
| scsi_init_dev_desc(&scsi_dev_desc[i], i); | |
| scsi_max_devs = 0; | |
| for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { | |
| for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) { | |
| ret = scsi_detect_dev(i, lun, | |
| &scsi_dev_desc[scsi_max_devs]); | |
| if (ret) | |
| continue; | |
| part_init(&scsi_dev_desc[scsi_max_devs]); | |
| if (mode == 1) { | |
| printf(" Device %d: ", 0); | |
| dev_print(&scsi_dev_desc[scsi_max_devs]); | |
| } /* if mode */ | |
| scsi_max_devs++; | |
| } /* next LUN */ | |
| } | |
| if (scsi_max_devs > 0) | |
| scsi_curr_dev = 0; | |
| else | |
| scsi_curr_dev = -1; | |
| printf("Found %d device(s).\n", scsi_max_devs); | |
| #ifndef CONFIG_SPL_BUILD | |
| setenv_ulong("scsidevs", scsi_max_devs); | |
| #endif | |
| return 0; | |
| } | |
| #endif | |
| #ifdef CONFIG_BLK | |
| static const struct blk_ops scsi_blk_ops = { | |
| .read = scsi_read, | |
| .write = scsi_write, | |
| }; | |
| U_BOOT_DRIVER(scsi_blk) = { | |
| .name = "scsi_blk", | |
| .id = UCLASS_BLK, | |
| .ops = &scsi_blk_ops, | |
| }; | |
| #else | |
| U_BOOT_LEGACY_BLK(scsi) = { | |
| .if_typename = "scsi", | |
| .if_type = IF_TYPE_SCSI, | |
| .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE, | |
| .desc = scsi_dev_desc, | |
| }; | |
| #endif |