| source "drivers/net/phy/Kconfig" | |
| config DM_ETH | |
| bool "Enable Driver Model for Ethernet drivers" | |
| depends on DM | |
| help | |
| Enable driver model for Ethernet. | |
| The eth_*() interface will be implemented by the UC_ETH class | |
| This is currently implemented in net/eth.c | |
| Look in include/net.h for details. | |
| menuconfig NETDEVICES | |
| bool "Network device support" | |
| depends on NET | |
| default y if DM_ETH | |
| help | |
| You must select Y to enable any network device support | |
| Generally if you have any networking support this is a given | |
| If unsure, say Y | |
| if NETDEVICES | |
| config AG7XXX | |
| bool "Atheros AG7xxx Ethernet MAC support" | |
| depends on DM_ETH && ARCH_ATH79 | |
| select PHYLIB | |
| help | |
| This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is | |
| present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. | |
| config ALTERA_TSE | |
| bool "Altera Triple-Speed Ethernet MAC support" | |
| depends on DM_ETH | |
| select PHYLIB | |
| help | |
| This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. | |
| Please find details on the "Triple-Speed Ethernet MegaCore Function | |
| Resource Center" of Altera. | |
| config DWC_ETH_QOS | |
| bool "Synopsys DWC Ethernet QOS device support" | |
| depends on DM_ETH | |
| select PHYLIB | |
| help | |
| This driver supports the Synopsys Designware Ethernet QOS (Quality | |
| Of Service) IP block. The IP supports many options for bus type, | |
| clocking/reset structure, and feature list. This driver currently | |
| supports the specific configuration used in NVIDIA's Tegra186 chip, | |
| but should be extensible to other combinations quite easily. | |
| config E1000 | |
| bool "Intel PRO/1000 Gigabit Ethernet support" | |
| help | |
| This driver supports Intel(R) PRO/1000 gigabit ethernet family of | |
| adapters. For more information on how to identify your adapter, go | |
| to the Adapter & Driver ID Guide at: | |
| <http://support.intel.com/support/network/adapter/pro100/21397.htm> | |
| config E1000_SPI_GENERIC | |
| bool "Allow access to the Intel 8257x SPI bus" | |
| depends on E1000 | |
| help | |
| Allow generic access to the SPI bus on the Intel 8257x, for | |
| example with the "sspi" command. | |
| config E1000_SPI | |
| bool "Enable SPI bus utility code" | |
| depends on E1000 | |
| help | |
| Utility code for direct access to the SPI bus on Intel 8257x. | |
| This does not do anything useful unless you set at least one | |
| of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. | |
| config CMD_E1000 | |
| bool "Enable the e1000 command" | |
| depends on E1000 | |
| help | |
| This enables the 'e1000' management command for E1000 devices. When | |
| used on devices with SPI support you can reprogram the EEPROM from | |
| U-Boot. | |
| config ETH_SANDBOX | |
| depends on DM_ETH && SANDBOX | |
| default y | |
| bool "Sandbox: Mocked Ethernet driver" | |
| help | |
| This driver simply responds with fake ARP replies and ping | |
| replies that are used to verify network stack functionality | |
| This driver is particularly useful in the test/dm/eth.c tests | |
| config ETH_SANDBOX_RAW | |
| depends on DM_ETH && SANDBOX | |
| default y | |
| bool "Sandbox: Bridge to Linux Raw Sockets" | |
| help | |
| This driver is a bridge from the bottom of the network stack | |
| in U-Boot to the RAW AF_PACKET API in Linux. This allows real | |
| network traffic to be tested from within sandbox. See | |
| board/sandbox/README.sandbox for more details. | |
| config ETH_DESIGNWARE | |
| bool "Synopsys Designware Ethernet MAC" | |
| select PHYLIB | |
| help | |
| This MAC is present in SoCs from various vendors. It supports | |
| 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to | |
| provide the PHY (physical media interface). | |
| config ETHOC | |
| bool "OpenCores 10/100 Mbps Ethernet MAC" | |
| help | |
| This MAC is present in OpenRISC and Xtensa XTFPGA boards. | |
| config FEC_MXC | |
| bool "FEC Ethernet controller" | |
| depends on MX5 || MX6 | |
| help | |
| This driver supports the 10/100 Fast Ethernet controller for | |
| NXP i.MX processors. | |
| config MVPP2 | |
| bool "Marvell Armada 375/7K/8K network interface support" | |
| depends on ARMADA_375 || ARMADA_8K | |
| select PHYLIB | |
| help | |
| This driver supports the network interface units in the | |
| Marvell ARMADA 375, 7K and 8K SoCs. | |
| config MACB | |
| bool "Cadence MACB/GEM Ethernet Interface" | |
| depends on DM_ETH | |
| select PHYLIB | |
| help | |
| The Cadence MACB ethernet interface is found on many Atmel | |
| AT91 and SAMA5 parts. This driver also supports the Cadence | |
| GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. | |
| Say Y to include support for the MACB/GEM chip. | |
| config PCH_GBE | |
| bool "Intel Platform Controller Hub EG20T GMAC driver" | |
| depends on DM_ETH && DM_PCI | |
| select PHYLIB | |
| help | |
| This MAC is present in Intel Platform Controller Hub EG20T. It | |
| supports 10/100/1000 Mbps operation. | |
| config RGMII | |
| bool "Enable RGMII" | |
| help | |
| Enable the support of the Reduced Gigabit Media-Independent | |
| Interface (RGMII). | |
| config RTL8139 | |
| bool "Realtek 8139 series Ethernet controller driver" | |
| help | |
| This driver supports Realtek 8139 series fast ethernet family of | |
| PCI chipsets/adapters. | |
| config RTL8169 | |
| bool "Realtek 8169 series Ethernet controller driver" | |
| help | |
| This driver supports Realtek 8169 series gigabit ethernet family of | |
| PCI/PCIe chipsets/adapters. | |
| config SUN7I_GMAC | |
| bool "Enable Allwinner GMAC Ethernet support" | |
| help | |
| Enable the support for Sun7i GMAC Ethernet controller | |
| config SUN4I_EMAC | |
| bool "Allwinner Sun4i Ethernet MAC support" | |
| depends on DM_ETH | |
| help | |
| This driver supports the Allwinner based SUN4I Ethernet MAC. | |
| config SUN8I_EMAC | |
| bool "Allwinner Sun8i Ethernet MAC support" | |
| depends on DM_ETH | |
| select PHYLIB | |
| help | |
| This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. | |
| It can be found in H3/A64/A83T based SoCs and compatible with both | |
| External and Internal PHYs. | |
| config XILINX_AXIEMAC | |
| depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) | |
| select PHYLIB | |
| select MII | |
| bool "Xilinx AXI Ethernet" | |
| help | |
| This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. | |
| config XILINX_EMACLITE | |
| depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS) | |
| select PHYLIB | |
| select MII | |
| bool "Xilinx Ethernetlite" | |
| help | |
| This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. | |
| config ZYNQ_GEM | |
| depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) | |
| select PHYLIB | |
| bool "Xilinx Ethernet GEM" | |
| help | |
| This MAC is present in Xilinx Zynq and ZynqMP SoCs. | |
| config PIC32_ETH | |
| bool "Microchip PIC32 Ethernet Support" | |
| depends on DM_ETH && MACH_PIC32 | |
| select PHYLIB | |
| help | |
| This driver implements 10/100 Mbps Ethernet and MAC layer for | |
| Microchip PIC32 microcontrollers. | |
| config GMAC_ROCKCHIP | |
| bool "Rockchip Synopsys Designware Ethernet MAC" | |
| depends on DM_ETH && ETH_DESIGNWARE | |
| help | |
| This driver provides Rockchip SoCs network support based on the | |
| Synopsys Designware driver. | |
| endif # NETDEVICES |