| /* | |
| * (C) Copyright 2005 | |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. | |
| * John Otken, jotken@softadvances.com | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| /************************************************************************ | |
| * luan.h - configuration for LUAN board | |
| ***********************************************************************/ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| /*----------------------------------------------------------------------- | |
| * High Level Configuration Options | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_LUAN 1 /* Board is Luan */ | |
| #define CONFIG_440SP 1 /* Specific PPC440SP support */ | |
| #define CONFIG_440 1 | |
| #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ | |
| #define CONFIG_SYS_TEXT_BASE 0xFFFB0000 | |
| /* | |
| * Include common defines/options for all AMCC eval boards | |
| */ | |
| #define CONFIG_HOSTNAME luan | |
| #include "amcc-common.h" | |
| #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ | |
| /*----------------------------------------------------------------------- | |
| * Base addresses -- Note these are effective addresses where the | |
| * actual resources get mapped (not physical addresses) | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_SYS_LARGE_FLASH 0xffc00000 /* 4MB flash address CS0 */ | |
| #define CONFIG_SYS_SMALL_FLASH 0xff900000 /* 1MB flash address CS2 */ | |
| #define CONFIG_SYS_SRAM_BASE 0xff800000 /* 1MB SRAM address CS2 */ | |
| #define CONFIG_SYS_SRAM_SIZE (1 << 20) | |
| #define CONFIG_SYS_EPLD_BASE 0xff000000 /* EPLD and FRAM CS1 */ | |
| #define CONFIG_SYS_ISRAM_BASE 0xf8000000 /* internal 8k SRAM (L2 cache) */ | |
| #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ | |
| #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ | |
| #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ | |
| #if CONFIG_SYS_LARGE_FLASH == 0xffc00000 | |
| #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LARGE_FLASH | |
| #else | |
| #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SMALL_FLASH | |
| #endif | |
| #if CONFIG_SYS_SRAM_BASE | |
| #define CONFIG_SYS_KBYTES_SDRAM 1024*2 | |
| #else | |
| #define CONFIG_SYS_KBYTES_SDRAM 1024 | |
| #endif | |
| /*----------------------------------------------------------------------- | |
| * Initial RAM & stack pointer (placed in SDRAM) | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE | |
| #define CONFIG_SYS_INIT_RAM_SIZE (8 << 10) | |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| /*----------------------------------------------------------------------- | |
| * Serial Port | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_CONS_INDEX 1 /* Use UART0 */ | |
| #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* external 11.059MHz clk */ | |
| /*----------------------------------------------------------------------- | |
| * Environment | |
| *----------------------------------------------------------------------*/ | |
| /* | |
| * Define here the location of the environment variables (FLASH or EEPROM). | |
| * Note: DENX encourages to use redundant environment in FLASH. | |
| */ | |
| #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ | |
| /*----------------------------------------------------------------------- | |
| * FLASH related | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */ | |
| #define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ | |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ | |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
| #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ | |
| #define CONFIG_SYS_FLASH_ADDR0 0x555 | |
| #define CONFIG_SYS_FLASH_ADDR1 0x2aa | |
| #define CONFIG_SYS_FLASH_WORD_SIZE unsigned char | |
| #ifdef CONFIG_ENV_IS_IN_FLASH | |
| #define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ | |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) | |
| #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ | |
| /* Address and size of Redundant Environment Sector */ | |
| #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) | |
| #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
| #endif /* CONFIG_ENV_IS_IN_FLASH */ | |
| /*----------------------------------------------------------------------- | |
| * DDR SDRAM | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ | |
| #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ | |
| #define CONFIG_DDR_ECC 1 /* with ECC support */ | |
| /*----------------------------------------------------------------------- | |
| * I2C | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 | |
| /* | |
| * Default environment variables | |
| */ | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| CONFIG_AMCC_DEF_ENV \ | |
| CONFIG_AMCC_DEF_ENV_PPC \ | |
| CONFIG_AMCC_DEF_ENV_NOR_UPD \ | |
| "kernel_addr=fc000000\0" \ | |
| "ramdisk_addr=fc100000\0" \ | |
| "" | |
| #define CONFIG_HAS_ETH0 | |
| #define CONFIG_PHY_ADDR 1 | |
| #define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ | |
| #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| #ifdef DEBUG | |
| #define CONFIG_PANIC_HANG | |
| #else | |
| #define CONFIG_HW_WATCHDOG /* watchdog */ | |
| #endif | |
| /* | |
| * Commands additional to the ones defined in amcc-common.h | |
| */ | |
| #define CONFIG_CMD_PCI | |
| #define CONFIG_CMD_SDRAM | |
| /*----------------------------------------------------------------------- | |
| * PCI stuff | |
| *----------------------------------------------------------------------- | |
| */ | |
| #if defined(CONFIG_CMD_PCI) | |
| /* General PCI */ | |
| #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ | |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| /* Board-specific PCI */ | |
| #define CONFIG_SYS_PCI_TARGET_INIT | |
| #undef CONFIG_SYS_PCI_MASTER_INIT | |
| #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ | |
| #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */ | |
| #endif | |
| #endif /* __CONFIG_H */ |