| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2000-2010 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * (C) Copyright 2008 | |
| * Guennadi Liakhovetski, DENX Software Engineering, lg@denx.de. | |
| */ | |
| #define _GNU_SOURCE | |
| #include <compiler.h> | |
| #include <env.h> | |
| #include <errno.h> | |
| #include <env_flags.h> | |
| #include <fcntl.h> | |
| #include <libgen.h> | |
| #include <linux/fs.h> | |
| #include <linux/stringify.h> | |
| #include <ctype.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <stddef.h> | |
| #include <string.h> | |
| #include <sys/types.h> | |
| #include <sys/ioctl.h> | |
| #include <sys/stat.h> | |
| #include <u-boot/crc.h> | |
| #include <unistd.h> | |
| #include <dirent.h> | |
| #ifdef MTD_OLD | |
| # include <stdint.h> | |
| # include <linux/mtd/mtd.h> | |
| #else | |
| # define __user /* nothing */ | |
| # include <mtd/mtd-user.h> | |
| #endif | |
| #include <mtd/ubi-user.h> | |
| #include "fw_env_private.h" | |
| #include "fw_env.h" | |
| struct env_opts default_opts = { | |
| #ifdef CONFIG_FILE | |
| .config_file = CONFIG_FILE | |
| #endif | |
| }; | |
| #define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) | |
| #define min(x, y) ({ \ | |
| typeof(x) _min1 = (x); \ | |
| typeof(y) _min2 = (y); \ | |
| (void) (&_min1 == &_min2); \ | |
| _min1 < _min2 ? _min1 : _min2; }) | |
| struct envdev_s { | |
| const char *devname; /* Device name */ | |
| long long devoff; /* Device offset */ | |
| ulong env_size; /* environment size */ | |
| ulong erase_size; /* device erase size */ | |
| ulong env_sectors; /* number of environment sectors */ | |
| uint8_t mtd_type; /* type of the MTD device */ | |
| int is_ubi; /* set if we use UBI volume */ | |
| }; | |
| static struct envdev_s envdevices[2] = { | |
| { | |
| .mtd_type = MTD_ABSENT, | |
| }, { | |
| .mtd_type = MTD_ABSENT, | |
| }, | |
| }; | |
| static int dev_current; | |
| #define DEVNAME(i) envdevices[(i)].devname | |
| #define DEVOFFSET(i) envdevices[(i)].devoff | |
| #define ENVSIZE(i) envdevices[(i)].env_size | |
| #define DEVESIZE(i) envdevices[(i)].erase_size | |
| #define ENVSECTORS(i) envdevices[(i)].env_sectors | |
| #define DEVTYPE(i) envdevices[(i)].mtd_type | |
| #define IS_UBI(i) envdevices[(i)].is_ubi | |
| #define CUR_ENVSIZE ENVSIZE(dev_current) | |
| static unsigned long usable_envsize; | |
| #define ENV_SIZE usable_envsize | |
| struct env_image_single { | |
| uint32_t crc; /* CRC32 over data bytes */ | |
| char data[]; | |
| }; | |
| struct env_image_redundant { | |
| uint32_t crc; /* CRC32 over data bytes */ | |
| unsigned char flags; /* active or obsolete */ | |
| char data[]; | |
| }; | |
| enum flag_scheme { | |
| FLAG_NONE, | |
| FLAG_BOOLEAN, | |
| FLAG_INCREMENTAL, | |
| }; | |
| struct environment { | |
| void *image; | |
| uint32_t *crc; | |
| unsigned char *flags; | |
| char *data; | |
| enum flag_scheme flag_scheme; | |
| int dirty; | |
| }; | |
| static struct environment environment = { | |
| .flag_scheme = FLAG_NONE, | |
| }; | |
| static int have_redund_env; | |
| #define DEFAULT_ENV_INSTANCE_STATIC | |
| #include <env_default.h> | |
| #define UBI_DEV_START "/dev/ubi" | |
| #define UBI_SYSFS "/sys/class/ubi" | |
| #define UBI_VOL_NAME_PATT "ubi%d_%d" | |
| static int is_ubi_devname(const char *devname) | |
| { | |
| return !strncmp(devname, UBI_DEV_START, sizeof(UBI_DEV_START) - 1); | |
| } | |
| static int ubi_check_volume_sysfs_name(const char *volume_sysfs_name, | |
| const char *volname) | |
| { | |
| char path[256]; | |
| FILE *file; | |
| char *name; | |
| int ret; | |
| strcpy(path, UBI_SYSFS "/"); | |
| strcat(path, volume_sysfs_name); | |
| strcat(path, "/name"); | |
| file = fopen(path, "r"); | |
| if (!file) | |
| return -1; | |
| ret = fscanf(file, "%ms", &name); | |
| fclose(file); | |
| if (ret <= 0 || !name) { | |
| fprintf(stderr, | |
| "Failed to read from file %s, ret = %d, name = %s\n", | |
| path, ret, name); | |
| return -1; | |
| } | |
| if (!strcmp(name, volname)) { | |
| free(name); | |
| return 0; | |
| } | |
| free(name); | |
| return -1; | |
| } | |
| static int ubi_get_volnum_by_name(int devnum, const char *volname) | |
| { | |
| DIR *sysfs_ubi; | |
| struct dirent *dirent; | |
| int ret; | |
| int tmp_devnum; | |
| int volnum; | |
| sysfs_ubi = opendir(UBI_SYSFS); | |
| if (!sysfs_ubi) | |
| return -1; | |
| #ifdef DEBUG | |
| fprintf(stderr, "Looking for volume name \"%s\"\n", volname); | |
| #endif | |
| while (1) { | |
| dirent = readdir(sysfs_ubi); | |
| if (!dirent) | |
| return -1; | |
| ret = sscanf(dirent->d_name, UBI_VOL_NAME_PATT, | |
| &tmp_devnum, &volnum); | |
| if (ret == 2 && devnum == tmp_devnum) { | |
| if (ubi_check_volume_sysfs_name(dirent->d_name, | |
| volname) == 0) { | |
| closedir(sysfs_ubi); | |
| return volnum; | |
| } | |
| } | |
| } | |
| closedir(sysfs_ubi); | |
| return -1; | |
| } | |
| static int ubi_get_devnum_by_devname(const char *devname) | |
| { | |
| int devnum; | |
| int ret; | |
| ret = sscanf(devname + sizeof(UBI_DEV_START) - 1, "%d", &devnum); | |
| if (ret != 1) | |
| return -1; | |
| return devnum; | |
| } | |
| static const char *ubi_get_volume_devname(const char *devname, | |
| const char *volname) | |
| { | |
| char *volume_devname; | |
| int volnum; | |
| int devnum; | |
| int ret; | |
| devnum = ubi_get_devnum_by_devname(devname); | |
| if (devnum < 0) | |
| return NULL; | |
| volnum = ubi_get_volnum_by_name(devnum, volname); | |
| if (volnum < 0) | |
| return NULL; | |
| ret = asprintf(&volume_devname, "%s_%d", devname, volnum); | |
| if (ret < 0) | |
| return NULL; | |
| #ifdef DEBUG | |
| fprintf(stderr, "Found ubi volume \"%s:%s\" -> %s\n", | |
| devname, volname, volume_devname); | |
| #endif | |
| return volume_devname; | |
| } | |
| static void ubi_check_dev(unsigned int dev_id) | |
| { | |
| char *devname = (char *)DEVNAME(dev_id); | |
| char *pname; | |
| const char *volname = NULL; | |
| const char *volume_devname; | |
| if (!is_ubi_devname(DEVNAME(dev_id))) | |
| return; | |
| IS_UBI(dev_id) = 1; | |
| for (pname = devname; *pname != '\0'; pname++) { | |
| if (*pname == ':') { | |
| *pname = '\0'; | |
| volname = pname + 1; | |
| break; | |
| } | |
| } | |
| if (volname) { | |
| /* Let's find real volume device name */ | |
| volume_devname = ubi_get_volume_devname(devname, volname); | |
| if (!volume_devname) { | |
| fprintf(stderr, "Didn't found ubi volume \"%s\"\n", | |
| volname); | |
| return; | |
| } | |
| free(devname); | |
| DEVNAME(dev_id) = volume_devname; | |
| } | |
| } | |
| static int ubi_update_start(int fd, int64_t bytes) | |
| { | |
| if (ioctl(fd, UBI_IOCVOLUP, &bytes)) | |
| return -1; | |
| return 0; | |
| } | |
| static int ubi_read(int fd, void *buf, size_t count) | |
| { | |
| ssize_t ret; | |
| while (count > 0) { | |
| ret = read(fd, buf, count); | |
| if (ret > 0) { | |
| count -= ret; | |
| buf += ret; | |
| continue; | |
| } | |
| if (ret == 0) { | |
| /* | |
| * Happens in case of too short volume data size. If we | |
| * return error status we will fail it will be treated | |
| * as UBI device error. | |
| * | |
| * Leave catching this error to CRC check. | |
| */ | |
| fprintf(stderr, "Warning: end of data on ubi volume\n"); | |
| return 0; | |
| } else if (errno == EBADF) { | |
| /* | |
| * Happens in case of corrupted volume. The same as | |
| * above, we cannot return error now, as we will still | |
| * be able to successfully write environment later. | |
| */ | |
| fprintf(stderr, "Warning: corrupted volume?\n"); | |
| return 0; | |
| } else if (errno == EINTR) { | |
| continue; | |
| } | |
| fprintf(stderr, "Cannot read %u bytes from ubi volume, %s\n", | |
| (unsigned int)count, strerror(errno)); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int ubi_write(int fd, const void *buf, size_t count) | |
| { | |
| ssize_t ret; | |
| while (count > 0) { | |
| ret = write(fd, buf, count); | |
| if (ret <= 0) { | |
| if (ret < 0 && errno == EINTR) | |
| continue; | |
| fprintf(stderr, "Cannot write %u bytes to ubi volume\n", | |
| (unsigned int)count); | |
| return -1; | |
| } | |
| count -= ret; | |
| buf += ret; | |
| } | |
| return 0; | |
| } | |
| static int flash_io(int mode, void *buf, size_t count); | |
| static int parse_config(struct env_opts *opts); | |
| #if defined(CONFIG_FILE) | |
| static int get_config(char *); | |
| #endif | |
| static char *skip_chars(char *s) | |
| { | |
| for (; *s != '\0'; s++) { | |
| if (isblank(*s) || *s == '=') | |
| return s; | |
| } | |
| return NULL; | |
| } | |
| static char *skip_blanks(char *s) | |
| { | |
| for (; *s != '\0'; s++) { | |
| if (!isblank(*s)) | |
| return s; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * s1 is either a simple 'name', or a 'name=value' pair. | |
| * s2 is a 'name=value' pair. | |
| * If the names match, return the value of s2, else NULL. | |
| */ | |
| static char *envmatch(char *s1, char *s2) | |
| { | |
| if (s1 == NULL || s2 == NULL) | |
| return NULL; | |
| while (*s1 == *s2++) | |
| if (*s1++ == '=') | |
| return s2; | |
| if (*s1 == '\0' && *(s2 - 1) == '=') | |
| return s2; | |
| return NULL; | |
| } | |
| /** | |
| * Search the environment for a variable. | |
| * Return the value, if found, or NULL, if not found. | |
| */ | |
| char *fw_getenv(char *name) | |
| { | |
| char *env, *nxt; | |
| for (env = environment.data; *env; env = nxt + 1) { | |
| char *val; | |
| for (nxt = env; *nxt; ++nxt) { | |
| if (nxt >= &environment.data[ENV_SIZE]) { | |
| fprintf(stderr, "## Error: " | |
| "environment not terminated\n"); | |
| return NULL; | |
| } | |
| } | |
| val = envmatch(name, env); | |
| if (!val) | |
| continue; | |
| return val; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Search the default environment for a variable. | |
| * Return the value, if found, or NULL, if not found. | |
| */ | |
| char *fw_getdefenv(char *name) | |
| { | |
| char *env, *nxt; | |
| for (env = default_environment; *env; env = nxt + 1) { | |
| char *val; | |
| for (nxt = env; *nxt; ++nxt) { | |
| if (nxt >= &default_environment[ENV_SIZE]) { | |
| fprintf(stderr, "## Error: " | |
| "default environment not terminated\n"); | |
| return NULL; | |
| } | |
| } | |
| val = envmatch(name, env); | |
| if (!val) | |
| continue; | |
| return val; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Print the current definition of one, or more, or all | |
| * environment variables | |
| */ | |
| int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts) | |
| { | |
| int i, rc = 0; | |
| if (value_only && argc != 1) { | |
| fprintf(stderr, | |
| "## Error: `-n'/`--noheader' option requires exactly one argument\n"); | |
| return -1; | |
| } | |
| if (!opts) | |
| opts = &default_opts; | |
| if (fw_env_open(opts)) | |
| return -1; | |
| if (argc == 0) { /* Print all env variables */ | |
| char *env, *nxt; | |
| for (env = environment.data; *env; env = nxt + 1) { | |
| for (nxt = env; *nxt; ++nxt) { | |
| if (nxt >= &environment.data[ENV_SIZE]) { | |
| fprintf(stderr, "## Error: " | |
| "environment not terminated\n"); | |
| return -1; | |
| } | |
| } | |
| printf("%s\n", env); | |
| } | |
| fw_env_close(opts); | |
| return 0; | |
| } | |
| for (i = 0; i < argc; ++i) { /* print a subset of env variables */ | |
| char *name = argv[i]; | |
| char *val = NULL; | |
| val = fw_getenv(name); | |
| if (!val) { | |
| fprintf(stderr, "## Error: \"%s\" not defined\n", name); | |
| rc = -1; | |
| continue; | |
| } | |
| if (value_only) { | |
| puts(val); | |
| break; | |
| } | |
| printf("%s=%s\n", name, val); | |
| } | |
| fw_env_close(opts); | |
| return rc; | |
| } | |
| int fw_env_flush(struct env_opts *opts) | |
| { | |
| if (!opts) | |
| opts = &default_opts; | |
| if (!environment.dirty) | |
| return 0; | |
| /* | |
| * Update CRC | |
| */ | |
| *environment.crc = crc32(0, (uint8_t *) environment.data, ENV_SIZE); | |
| /* write environment back to flash */ | |
| if (flash_io(O_RDWR, environment.image, CUR_ENVSIZE)) { | |
| fprintf(stderr, "Error: can't write fw_env to flash\n"); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Set/Clear a single variable in the environment. | |
| * This is called in sequence to update the environment | |
| * in RAM without updating the copy in flash after each set | |
| */ | |
| int fw_env_write(char *name, char *value) | |
| { | |
| int len; | |
| char *env, *nxt; | |
| char *oldval = NULL; | |
| int deleting, creating, overwriting; | |
| /* | |
| * search if variable with this name already exists | |
| */ | |
| for (nxt = env = environment.data; *env; env = nxt + 1) { | |
| for (nxt = env; *nxt; ++nxt) { | |
| if (nxt >= &environment.data[ENV_SIZE]) { | |
| fprintf(stderr, "## Error: " | |
| "environment not terminated\n"); | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| } | |
| oldval = envmatch(name, env); | |
| if (oldval) | |
| break; | |
| } | |
| deleting = (oldval && !(value && strlen(value))); | |
| creating = (!oldval && (value && strlen(value))); | |
| overwriting = (oldval && (value && strlen(value) && | |
| strcmp(oldval, value))); | |
| /* check for permission */ | |
| if (deleting) { | |
| if (env_flags_validate_varaccess(name, | |
| ENV_FLAGS_VARACCESS_PREVENT_DELETE)) { | |
| printf("Can't delete \"%s\"\n", name); | |
| errno = EROFS; | |
| return -1; | |
| } | |
| } else if (overwriting) { | |
| if (env_flags_validate_varaccess(name, | |
| ENV_FLAGS_VARACCESS_PREVENT_OVERWR)) { | |
| printf("Can't overwrite \"%s\"\n", name); | |
| errno = EROFS; | |
| return -1; | |
| } else if (env_flags_validate_varaccess(name, | |
| ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR)) { | |
| const char *defval = fw_getdefenv(name); | |
| if (defval == NULL) | |
| defval = ""; | |
| if (strcmp(oldval, defval) | |
| != 0) { | |
| printf("Can't overwrite \"%s\"\n", name); | |
| errno = EROFS; | |
| return -1; | |
| } | |
| } | |
| } else if (creating) { | |
| if (env_flags_validate_varaccess(name, | |
| ENV_FLAGS_VARACCESS_PREVENT_CREATE)) { | |
| printf("Can't create \"%s\"\n", name); | |
| errno = EROFS; | |
| return -1; | |
| } | |
| } else | |
| /* Nothing to do */ | |
| return 0; | |
| environment.dirty = 1; | |
| if (deleting || overwriting) { | |
| if (*++nxt == '\0') { | |
| *env = '\0'; | |
| } else { | |
| for (;;) { | |
| *env = *nxt++; | |
| if ((*env == '\0') && (*nxt == '\0')) | |
| break; | |
| ++env; | |
| } | |
| } | |
| *++env = '\0'; | |
| } | |
| /* Delete only ? */ | |
| if (!value || !strlen(value)) | |
| return 0; | |
| /* | |
| * Append new definition at the end | |
| */ | |
| for (env = environment.data; *env || *(env + 1); ++env) | |
| ; | |
| if (env > environment.data) | |
| ++env; | |
| /* | |
| * Overflow when: | |
| * "name" + "=" + "val" +"\0\0" > CUR_ENVSIZE - (env-environment) | |
| */ | |
| len = strlen(name) + 2; | |
| /* add '=' for first arg, ' ' for all others */ | |
| len += strlen(value) + 1; | |
| if (len > (&environment.data[ENV_SIZE] - env)) { | |
| fprintf(stderr, | |
| "Error: environment overflow, \"%s\" deleted\n", name); | |
| return -1; | |
| } | |
| while ((*env = *name++) != '\0') | |
| env++; | |
| *env = '='; | |
| while ((*++env = *value++) != '\0') | |
| ; | |
| /* end is marked with double '\0' */ | |
| *++env = '\0'; | |
| return 0; | |
| } | |
| /* | |
| * Deletes or sets environment variables. Returns -1 and sets errno error codes: | |
| * 0 - OK | |
| * EINVAL - need at least 1 argument | |
| * EROFS - certain variables ("ethaddr", "serial#") cannot be | |
| * modified or deleted | |
| * | |
| */ | |
| int fw_env_set(int argc, char *argv[], struct env_opts *opts) | |
| { | |
| int i; | |
| size_t len; | |
| char *name, **valv; | |
| char *oldval; | |
| char *value = NULL; | |
| int valc; | |
| int ret; | |
| if (!opts) | |
| opts = &default_opts; | |
| if (argc < 1) { | |
| fprintf(stderr, "## Error: variable name missing\n"); | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| if (fw_env_open(opts)) { | |
| fprintf(stderr, "Error: environment not initialized\n"); | |
| return -1; | |
| } | |
| name = argv[0]; | |
| valv = argv + 1; | |
| valc = argc - 1; | |
| if (env_flags_validate_env_set_params(name, valv, valc) < 0) { | |
| fw_env_close(opts); | |
| return -1; | |
| } | |
| len = 0; | |
| for (i = 0; i < valc; ++i) { | |
| char *val = valv[i]; | |
| size_t val_len = strlen(val); | |
| if (value) | |
| value[len - 1] = ' '; | |
| oldval = value; | |
| value = realloc(value, len + val_len + 1); | |
| if (!value) { | |
| fprintf(stderr, | |
| "Cannot malloc %zu bytes: %s\n", | |
| len, strerror(errno)); | |
| free(oldval); | |
| return -1; | |
| } | |
| memcpy(value + len, val, val_len); | |
| len += val_len; | |
| value[len++] = '\0'; | |
| } | |
| fw_env_write(name, value); | |
| free(value); | |
| ret = fw_env_flush(opts); | |
| fw_env_close(opts); | |
| return ret; | |
| } | |
| /* | |
| * Parse a file and configure the u-boot variables. | |
| * The script file has a very simple format, as follows: | |
| * | |
| * Each line has a couple with name, value: | |
| * <white spaces>variable_name<white spaces>variable_value | |
| * | |
| * Both variable_name and variable_value are interpreted as strings. | |
| * Any character after <white spaces> and before ending \r\n is interpreted | |
| * as variable's value (no comment allowed on these lines !) | |
| * | |
| * Comments are allowed if the first character in the line is # | |
| * | |
| * Returns -1 and sets errno error codes: | |
| * 0 - OK | |
| * -1 - Error | |
| */ | |
| int fw_parse_script(char *fname, struct env_opts *opts) | |
| { | |
| FILE *fp; | |
| char *line = NULL; | |
| size_t linesize = 0; | |
| char *name; | |
| char *val; | |
| int lineno = 0; | |
| int len; | |
| int ret = 0; | |
| if (!opts) | |
| opts = &default_opts; | |
| if (fw_env_open(opts)) { | |
| fprintf(stderr, "Error: environment not initialized\n"); | |
| return -1; | |
| } | |
| if (strcmp(fname, "-") == 0) | |
| fp = stdin; | |
| else { | |
| fp = fopen(fname, "r"); | |
| if (fp == NULL) { | |
| fprintf(stderr, "I cannot open %s for reading\n", | |
| fname); | |
| return -1; | |
| } | |
| } | |
| while ((len = getline(&line, &linesize, fp)) != -1) { | |
| lineno++; | |
| /* | |
| * Read a whole line from the file. If the line is not | |
| * terminated, reports an error and exit. | |
| */ | |
| if (line[len - 1] != '\n') { | |
| fprintf(stderr, | |
| "Line %d not correctly terminated\n", | |
| lineno); | |
| ret = -1; | |
| break; | |
| } | |
| /* Drop ending line feed / carriage return */ | |
| line[--len] = '\0'; | |
| if (len && line[len - 1] == '\r') | |
| line[--len] = '\0'; | |
| /* Skip comment or empty lines */ | |
| if (len == 0 || line[0] == '#') | |
| continue; | |
| /* | |
| * Search for variable's name remove leading whitespaces | |
| */ | |
| name = skip_blanks(line); | |
| if (!name) | |
| continue; | |
| /* The first white space is the end of variable name */ | |
| val = skip_chars(name); | |
| len = strlen(name); | |
| if (val) { | |
| *val++ = '\0'; | |
| if ((val - name) < len) | |
| val = skip_blanks(val); | |
| else | |
| val = NULL; | |
| } | |
| #ifdef DEBUG | |
| fprintf(stderr, "Setting %s : %s\n", | |
| name, val ? val : " removed"); | |
| #endif | |
| if (env_flags_validate_type(name, val) < 0) { | |
| ret = -1; | |
| break; | |
| } | |
| /* | |
| * If there is an error setting a variable, | |
| * try to save the environment and returns an error | |
| */ | |
| if (fw_env_write(name, val)) { | |
| fprintf(stderr, | |
| "fw_env_write returns with error : %s\n", | |
| strerror(errno)); | |
| ret = -1; | |
| break; | |
| } | |
| } | |
| free(line); | |
| /* Close file if not stdin */ | |
| if (strcmp(fname, "-") != 0) | |
| fclose(fp); | |
| ret |= fw_env_flush(opts); | |
| fw_env_close(opts); | |
| return ret; | |
| } | |
| /** | |
| * environment_end() - compute offset of first byte right after environment | |
| * @dev - index of enviroment buffer | |
| * Return: | |
| * device offset of first byte right after environment | |
| */ | |
| off_t environment_end(int dev) | |
| { | |
| /* environment is block aligned */ | |
| return DEVOFFSET(dev) + ENVSECTORS(dev) * DEVESIZE(dev); | |
| } | |
| /* | |
| * Test for bad block on NAND, just returns 0 on NOR, on NAND: | |
| * 0 - block is good | |
| * > 0 - block is bad | |
| * < 0 - failed to test | |
| */ | |
| static int flash_bad_block(int fd, uint8_t mtd_type, loff_t blockstart) | |
| { | |
| if (mtd_type == MTD_NANDFLASH) { | |
| int badblock = ioctl(fd, MEMGETBADBLOCK, &blockstart); | |
| if (badblock < 0) { | |
| perror("Cannot read bad block mark"); | |
| return badblock; | |
| } | |
| if (badblock) { | |
| #ifdef DEBUG | |
| fprintf(stderr, "Bad block at 0x%llx, skipping\n", | |
| (unsigned long long)blockstart); | |
| #endif | |
| return badblock; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Read data from flash at an offset into a provided buffer. On NAND it skips | |
| * bad blocks but makes sure it stays within ENVSECTORS (dev) starting from | |
| * the DEVOFFSET (dev) block. On NOR the loop is only run once. | |
| */ | |
| static int flash_read_buf(int dev, int fd, void *buf, size_t count, | |
| off_t offset) | |
| { | |
| size_t blocklen; /* erase / write length - one block on NAND, | |
| 0 on NOR */ | |
| size_t processed = 0; /* progress counter */ | |
| size_t readlen = count; /* current read length */ | |
| off_t block_seek; /* offset inside the current block to the start | |
| of the data */ | |
| loff_t blockstart; /* running start of the current block - | |
| MEMGETBADBLOCK needs 64 bits */ | |
| int rc; | |
| blockstart = (offset / DEVESIZE(dev)) * DEVESIZE(dev); | |
| /* Offset inside a block */ | |
| block_seek = offset - blockstart; | |
| if (DEVTYPE(dev) == MTD_NANDFLASH) { | |
| /* | |
| * NAND: calculate which blocks we are reading. We have | |
| * to read one block at a time to skip bad blocks. | |
| */ | |
| blocklen = DEVESIZE(dev); | |
| /* Limit to one block for the first read */ | |
| if (readlen > blocklen - block_seek) | |
| readlen = blocklen - block_seek; | |
| } else { | |
| blocklen = 0; | |
| } | |
| /* This only runs once on NOR flash */ | |
| while (processed < count) { | |
| rc = flash_bad_block(fd, DEVTYPE(dev), blockstart); | |
| if (rc < 0) /* block test failed */ | |
| return -1; | |
| if (blockstart + block_seek + readlen > environment_end(dev)) { | |
| /* End of range is reached */ | |
| fprintf(stderr, "Too few good blocks within range\n"); | |
| return -1; | |
| } | |
| if (rc) { /* block is bad */ | |
| blockstart += blocklen; | |
| continue; | |
| } | |
| /* | |
| * If a block is bad, we retry in the next block at the same | |
| * offset - see env/nand.c::writeenv() | |
| */ | |
| lseek(fd, blockstart + block_seek, SEEK_SET); | |
| rc = read(fd, buf + processed, readlen); | |
| if (rc == -1) { | |
| fprintf(stderr, "Read error on %s: %s\n", | |
| DEVNAME(dev), strerror(errno)); | |
| return -1; | |
| } | |
| #ifdef DEBUG | |
| fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n", | |
| rc, (unsigned long long)blockstart + block_seek, | |
| DEVNAME(dev)); | |
| #endif | |
| processed += rc; | |
| if (rc != readlen) { | |
| fprintf(stderr, | |
| "Warning on %s: Attempted to read %zd bytes but got %d\n", | |
| DEVNAME(dev), readlen, rc); | |
| readlen -= rc; | |
| block_seek += rc; | |
| } else { | |
| blockstart += blocklen; | |
| readlen = min(blocklen, count - processed); | |
| block_seek = 0; | |
| } | |
| } | |
| return processed; | |
| } | |
| /* | |
| * Write count bytes from begin of environment, but stay within | |
| * ENVSECTORS(dev) sectors of | |
| * DEVOFFSET (dev). Similar to the read case above, on NOR and dataflash we | |
| * erase and write the whole data at once. | |
| */ | |
| static int flash_write_buf(int dev, int fd, void *buf, size_t count) | |
| { | |
| void *data; | |
| struct erase_info_user erase; | |
| size_t blocklen; /* length of NAND block / NOR erase sector */ | |
| size_t erase_len; /* whole area that can be erased - may include | |
| bad blocks */ | |
| size_t erasesize; /* erase / write length - one block on NAND, | |
| whole area on NOR */ | |
| size_t processed = 0; /* progress counter */ | |
| size_t write_total; /* total size to actually write - excluding | |
| bad blocks */ | |
| off_t erase_offset; /* offset to the first erase block (aligned) | |
| below offset */ | |
| off_t block_seek; /* offset inside the erase block to the start | |
| of the data */ | |
| loff_t blockstart; /* running start of the current block - | |
| MEMGETBADBLOCK needs 64 bits */ | |
| int was_locked = 0; /* flash lock flag */ | |
| int rc; | |
| /* | |
| * For mtd devices only offset and size of the environment do matter | |
| */ | |
| if (DEVTYPE(dev) == MTD_ABSENT) { | |
| blocklen = count; | |
| erase_len = blocklen; | |
| blockstart = DEVOFFSET(dev); | |
| block_seek = 0; | |
| write_total = blocklen; | |
| } else { | |
| blocklen = DEVESIZE(dev); | |
| erase_offset = DEVOFFSET(dev); | |
| /* Maximum area we may use */ | |
| erase_len = environment_end(dev) - erase_offset; | |
| blockstart = erase_offset; | |
| /* Offset inside a block */ | |
| block_seek = DEVOFFSET(dev) - erase_offset; | |
| /* | |
| * Data size we actually write: from the start of the block | |
| * to the start of the data, then count bytes of data, and | |
| * to the end of the block | |
| */ | |
| write_total = ((block_seek + count + blocklen - 1) / | |
| blocklen) * blocklen; | |
| } | |
| /* | |
| * Support data anywhere within erase sectors: read out the complete | |
| * area to be erased, replace the environment image, write the whole | |
| * block back again. | |
| */ | |
| if (write_total > count) { | |
| data = malloc(erase_len); | |
| if (!data) { | |
| fprintf(stderr, | |
| "Cannot malloc %zu bytes: %s\n", | |
| erase_len, strerror(errno)); | |
| return -1; | |
| } | |
| rc = flash_read_buf(dev, fd, data, write_total, erase_offset); | |
| if (write_total != rc) | |
| return -1; | |
| #ifdef DEBUG | |
| fprintf(stderr, "Preserving data "); | |
| if (block_seek != 0) | |
| fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1); | |
| if (block_seek + count != write_total) { | |
| if (block_seek != 0) | |
| fprintf(stderr, " and "); | |
| fprintf(stderr, "0x%lx - 0x%lx", | |
| (unsigned long)block_seek + count, | |
| (unsigned long)write_total - 1); | |
| } | |
| fprintf(stderr, "\n"); | |
| #endif | |
| /* Overwrite the old environment */ | |
| memcpy(data + block_seek, buf, count); | |
| } else { | |
| /* | |
| * We get here, iff offset is block-aligned and count is a | |
| * multiple of blocklen - see write_total calculation above | |
| */ | |
| data = buf; | |
| } | |
| if (DEVTYPE(dev) == MTD_NANDFLASH) { | |
| /* | |
| * NAND: calculate which blocks we are writing. We have | |
| * to write one block at a time to skip bad blocks. | |
| */ | |
| erasesize = blocklen; | |
| } else { | |
| erasesize = erase_len; | |
| } | |
| erase.length = erasesize; | |
| /* This only runs once on NOR flash and SPI-dataflash */ | |
| while (processed < write_total) { | |
| rc = flash_bad_block(fd, DEVTYPE(dev), blockstart); | |
| if (rc < 0) /* block test failed */ | |
| return rc; | |
| if (blockstart + erasesize > environment_end(dev)) { | |
| fprintf(stderr, "End of range reached, aborting\n"); | |
| return -1; | |
| } | |
| if (rc) { /* block is bad */ | |
| blockstart += blocklen; | |
| continue; | |
| } | |
| if (DEVTYPE(dev) != MTD_ABSENT) { | |
| erase.start = blockstart; | |
| was_locked = ioctl(fd, MEMISLOCKED, &erase); | |
| /* treat any errors as unlocked flash */ | |
| if (was_locked < 0) | |
| was_locked = 0; | |
| if (was_locked) | |
| ioctl(fd, MEMUNLOCK, &erase); | |
| /* These do not need an explicit erase cycle */ | |
| if (DEVTYPE(dev) != MTD_DATAFLASH) | |
| if (ioctl(fd, MEMERASE, &erase) != 0) { | |
| fprintf(stderr, | |
| "MTD erase error on %s: %s\n", | |
| DEVNAME(dev), strerror(errno)); | |
| return -1; | |
| } | |
| } | |
| if (lseek(fd, blockstart, SEEK_SET) == -1) { | |
| fprintf(stderr, | |
| "Seek error on %s: %s\n", | |
| DEVNAME(dev), strerror(errno)); | |
| return -1; | |
| } | |
| #ifdef DEBUG | |
| fprintf(stderr, "Write 0x%llx bytes at 0x%llx\n", | |
| (unsigned long long)erasesize, | |
| (unsigned long long)blockstart); | |
| #endif | |
| if (write(fd, data + processed, erasesize) != erasesize) { | |
| fprintf(stderr, "Write error on %s: %s\n", | |
| DEVNAME(dev), strerror(errno)); | |
| return -1; | |
| } | |
| if (DEVTYPE(dev) != MTD_ABSENT) { | |
| if (was_locked) | |
| ioctl(fd, MEMLOCK, &erase); | |
| } | |
| processed += erasesize; | |
| block_seek = 0; | |
| blockstart += erasesize; | |
| } | |
| if (write_total > count) | |
| free(data); | |
| return processed; | |
| } | |
| /* | |
| * Set obsolete flag at offset - NOR flash only | |
| */ | |
| static int flash_flag_obsolete(int dev, int fd, off_t offset) | |
| { | |
| int rc; | |
| struct erase_info_user erase; | |
| char tmp = ENV_REDUND_OBSOLETE; | |
| int was_locked; /* flash lock flag */ | |
| erase.start = DEVOFFSET(dev); | |
| erase.length = DEVESIZE(dev); | |
| /* This relies on the fact, that ENV_REDUND_OBSOLETE == 0 */ | |
| rc = lseek(fd, offset, SEEK_SET); | |
| if (rc < 0) { | |
| fprintf(stderr, "Cannot seek to set the flag on %s\n", | |
| DEVNAME(dev)); | |
| return rc; | |
| } | |
| was_locked = ioctl(fd, MEMISLOCKED, &erase); | |
| /* treat any errors as unlocked flash */ | |
| if (was_locked < 0) | |
| was_locked = 0; | |
| if (was_locked) | |
| ioctl(fd, MEMUNLOCK, &erase); | |
| rc = write(fd, &tmp, sizeof(tmp)); | |
| if (was_locked) | |
| ioctl(fd, MEMLOCK, &erase); | |
| if (rc < 0) | |
| perror("Could not set obsolete flag"); | |
| return rc; | |
| } | |
| static int flash_write(int fd_current, int fd_target, int dev_target, void *buf, | |
| size_t count) | |
| { | |
| int rc; | |
| switch (environment.flag_scheme) { | |
| case FLAG_NONE: | |
| break; | |
| case FLAG_INCREMENTAL: | |
| (*environment.flags)++; | |
| break; | |
| case FLAG_BOOLEAN: | |
| *environment.flags = ENV_REDUND_ACTIVE; | |
| break; | |
| default: | |
| fprintf(stderr, "Unimplemented flash scheme %u\n", | |
| environment.flag_scheme); | |
| return -1; | |
| } | |
| #ifdef DEBUG | |
| fprintf(stderr, "Writing new environment at 0x%llx on %s\n", | |
| DEVOFFSET(dev_target), DEVNAME(dev_target)); | |
| #endif | |
| if (IS_UBI(dev_target)) { | |
| if (ubi_update_start(fd_target, CUR_ENVSIZE) < 0) | |
| return -1; | |
| return ubi_write(fd_target, buf, count); | |
| } | |
| rc = flash_write_buf(dev_target, fd_target, buf, count); | |
| if (rc < 0) | |
| return rc; | |
| if (environment.flag_scheme == FLAG_BOOLEAN) { | |
| /* Have to set obsolete flag */ | |
| off_t offset = DEVOFFSET(dev_current) + | |
| offsetof(struct env_image_redundant, flags); | |
| #ifdef DEBUG | |
| fprintf(stderr, | |
| "Setting obsolete flag in environment at 0x%llx on %s\n", | |
| DEVOFFSET(dev_current), DEVNAME(dev_current)); | |
| #endif | |
| flash_flag_obsolete(dev_current, fd_current, offset); | |
| } | |
| return 0; | |
| } | |
| static int flash_read(int fd, void *buf, size_t count) | |
| { | |
| int rc; | |
| if (IS_UBI(dev_current)) { | |
| DEVTYPE(dev_current) = MTD_ABSENT; | |
| return ubi_read(fd, buf, count); | |
| } | |
| rc = flash_read_buf(dev_current, fd, buf, count, | |
| DEVOFFSET(dev_current)); | |
| if (rc != CUR_ENVSIZE) | |
| return -1; | |
| return 0; | |
| } | |
| static int flash_open_tempfile(const char **dname, const char **target_temp) | |
| { | |
| char *dup_name = strdup(DEVNAME(dev_current)); | |
| char *temp_name = NULL; | |
| int rc = -1; | |
| if (!dup_name) | |
| return -1; | |
| *dname = dirname(dup_name); | |
| if (!*dname) | |
| goto err; | |
| rc = asprintf(&temp_name, "%s/XXXXXX", *dname); | |
| if (rc == -1) | |
| goto err; | |
| rc = mkstemp(temp_name); | |
| if (rc == -1) { | |
| /* fall back to in place write */ | |
| fprintf(stderr, | |
| "Can't create %s: %s\n", temp_name, strerror(errno)); | |
| free(temp_name); | |
| } else { | |
| *target_temp = temp_name; | |
| /* deliberately leak dup_name as dname /might/ point into | |
| * it and we need it for our caller | |
| */ | |
| dup_name = NULL; | |
| } | |
| err: | |
| if (dup_name) | |
| free(dup_name); | |
| return rc; | |
| } | |
| static int flash_io_write(int fd_current, void *buf, size_t count) | |
| { | |
| int fd_target = -1, rc, dev_target; | |
| const char *dname, *target_temp = NULL; | |
| if (have_redund_env) { | |
| /* switch to next partition for writing */ | |
| dev_target = !dev_current; | |
| /* dev_target: fd_target, erase_target */ | |
| fd_target = open(DEVNAME(dev_target), O_RDWR); | |
| if (fd_target < 0) { | |
| fprintf(stderr, | |
| "Can't open %s: %s\n", | |
| DEVNAME(dev_target), strerror(errno)); | |
| rc = -1; | |
| goto exit; | |
| } | |
| } else { | |
| struct stat sb; | |
| if (fstat(fd_current, &sb) == 0 && S_ISREG(sb.st_mode)) { | |
| /* if any part of flash_open_tempfile() fails we fall | |
| * back to in-place writes | |
| */ | |
| fd_target = flash_open_tempfile(&dname, &target_temp); | |
| } | |
| dev_target = dev_current; | |
| if (fd_target == -1) | |
| fd_target = fd_current; | |
| } | |
| rc = flash_write(fd_current, fd_target, dev_target, buf, count); | |
| if (fsync(fd_current) && !(errno == EINVAL || errno == EROFS)) { | |
| fprintf(stderr, | |
| "fsync failed on %s: %s\n", | |
| DEVNAME(dev_current), strerror(errno)); | |
| } | |
| if (fd_current != fd_target) { | |
| if (fsync(fd_target) && | |
| !(errno == EINVAL || errno == EROFS)) { | |
| fprintf(stderr, | |
| "fsync failed on %s: %s\n", | |
| DEVNAME(dev_current), strerror(errno)); | |
| } | |
| if (close(fd_target)) { | |
| fprintf(stderr, | |
| "I/O error on %s: %s\n", | |
| DEVNAME(dev_target), strerror(errno)); | |
| rc = -1; | |
| } | |
| if (rc >= 0 && target_temp) { | |
| int dir_fd; | |
| dir_fd = open(dname, O_DIRECTORY | O_RDONLY); | |
| if (dir_fd == -1) | |
| fprintf(stderr, | |
| "Can't open %s: %s\n", | |
| dname, strerror(errno)); | |
| if (rename(target_temp, DEVNAME(dev_target))) { | |
| fprintf(stderr, | |
| "rename failed %s => %s: %s\n", | |
| target_temp, DEVNAME(dev_target), | |
| strerror(errno)); | |
| rc = -1; | |
| } | |
| if (dir_fd != -1 && fsync(dir_fd)) | |
| fprintf(stderr, | |
| "fsync failed on %s: %s\n", | |
| dname, strerror(errno)); | |
| if (dir_fd != -1 && close(dir_fd)) | |
| fprintf(stderr, | |
| "I/O error on %s: %s\n", | |
| dname, strerror(errno)); | |
| } | |
| } | |
| exit: | |
| return rc; | |
| } | |
| static int flash_io(int mode, void *buf, size_t count) | |
| { | |
| int fd_current, rc; | |
| /* dev_current: fd_current, erase_current */ | |
| fd_current = open(DEVNAME(dev_current), mode); | |
| if (fd_current < 0) { | |
| fprintf(stderr, | |
| "Can't open %s: %s\n", | |
| DEVNAME(dev_current), strerror(errno)); | |
| return -1; | |
| } | |
| if (mode == O_RDWR) { | |
| rc = flash_io_write(fd_current, buf, count); | |
| } else { | |
| rc = flash_read(fd_current, buf, count); | |
| } | |
| if (close(fd_current)) { | |
| fprintf(stderr, | |
| "I/O error on %s: %s\n", | |
| DEVNAME(dev_current), strerror(errno)); | |
| return -1; | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Prevent confusion if running from erased flash memory | |
| */ | |
| int fw_env_open(struct env_opts *opts) | |
| { | |
| int crc0, crc0_ok; | |
| unsigned char flag0; | |
| void *addr0 = NULL; | |
| int crc1, crc1_ok; | |
| unsigned char flag1; | |
| void *addr1 = NULL; | |
| int ret; | |
| if (!opts) | |
| opts = &default_opts; | |
| if (parse_config(opts)) /* should fill envdevices */ | |
| return -EINVAL; | |
| addr0 = calloc(1, CUR_ENVSIZE); | |
| if (addr0 == NULL) { | |
| fprintf(stderr, | |
| "Not enough memory for environment (%ld bytes)\n", | |
| CUR_ENVSIZE); | |
| ret = -ENOMEM; | |
| goto open_cleanup; | |
| } | |
| dev_current = 0; | |
| if (flash_io(O_RDONLY, addr0, CUR_ENVSIZE)) { | |
| ret = -EIO; | |
| goto open_cleanup; | |
| } | |
| if (!have_redund_env) { | |
| struct env_image_single *single = addr0; | |
| crc0 = crc32(0, (uint8_t *)single->data, ENV_SIZE); | |
| crc0_ok = (crc0 == single->crc); | |
| if (!crc0_ok) { | |
| fprintf(stderr, | |
| "Warning: Bad CRC, using default environment\n"); | |
| memcpy(single->data, default_environment, | |
| sizeof(default_environment)); | |
| environment.dirty = 1; | |
| } | |
| environment.image = addr0; | |
| environment.crc = &single->crc; | |
| environment.flags = NULL; | |
| environment.data = single->data; | |
| } else { | |
| struct env_image_redundant *redundant0 = addr0; | |
| struct env_image_redundant *redundant1; | |
| crc0 = crc32(0, (uint8_t *)redundant0->data, ENV_SIZE); | |
| crc0_ok = (crc0 == redundant0->crc); | |
| flag0 = redundant0->flags; | |
| dev_current = 1; | |
| addr1 = calloc(1, CUR_ENVSIZE); | |
| if (addr1 == NULL) { | |
| fprintf(stderr, | |
| "Not enough memory for environment (%ld bytes)\n", | |
| CUR_ENVSIZE); | |
| ret = -ENOMEM; | |
| goto open_cleanup; | |
| } | |
| redundant1 = addr1; | |
| if (flash_io(O_RDONLY, addr1, CUR_ENVSIZE)) { | |
| ret = -EIO; | |
| goto open_cleanup; | |
| } | |
| /* Check flag scheme compatibility */ | |
| if (DEVTYPE(dev_current) == MTD_NORFLASH && | |
| DEVTYPE(!dev_current) == MTD_NORFLASH) { | |
| environment.flag_scheme = FLAG_BOOLEAN; | |
| } else if (DEVTYPE(dev_current) == MTD_NANDFLASH && | |
| DEVTYPE(!dev_current) == MTD_NANDFLASH) { | |
| environment.flag_scheme = FLAG_INCREMENTAL; | |
| } else if (DEVTYPE(dev_current) == MTD_DATAFLASH && | |
| DEVTYPE(!dev_current) == MTD_DATAFLASH) { | |
| environment.flag_scheme = FLAG_BOOLEAN; | |
| } else if (DEVTYPE(dev_current) == MTD_UBIVOLUME && | |
| DEVTYPE(!dev_current) == MTD_UBIVOLUME) { | |
| environment.flag_scheme = FLAG_INCREMENTAL; | |
| } else if (DEVTYPE(dev_current) == MTD_ABSENT && | |
| DEVTYPE(!dev_current) == MTD_ABSENT && | |
| IS_UBI(dev_current) == IS_UBI(!dev_current)) { | |
| environment.flag_scheme = FLAG_INCREMENTAL; | |
| } else { | |
| fprintf(stderr, "Incompatible flash types!\n"); | |
| ret = -EINVAL; | |
| goto open_cleanup; | |
| } | |
| crc1 = crc32(0, (uint8_t *)redundant1->data, ENV_SIZE); | |
| crc1_ok = (crc1 == redundant1->crc); | |
| flag1 = redundant1->flags; | |
| if (memcmp(redundant0->data, redundant1->data, ENV_SIZE) || | |
| !crc0_ok || !crc1_ok) | |
| environment.dirty = 1; | |
| if (crc0_ok && !crc1_ok) { | |
| dev_current = 0; | |
| } else if (!crc0_ok && crc1_ok) { | |
| dev_current = 1; | |
| } else if (!crc0_ok && !crc1_ok) { | |
| fprintf(stderr, | |
| "Warning: Bad CRC, using default environment\n"); | |
| memcpy(redundant0->data, default_environment, | |
| sizeof(default_environment)); | |
| environment.dirty = 1; | |
| dev_current = 0; | |
| } else { | |
| switch (environment.flag_scheme) { | |
| case FLAG_BOOLEAN: | |
| if (flag0 == ENV_REDUND_ACTIVE && | |
| flag1 == ENV_REDUND_OBSOLETE) { | |
| dev_current = 0; | |
| } else if (flag0 == ENV_REDUND_OBSOLETE && | |
| flag1 == ENV_REDUND_ACTIVE) { | |
| dev_current = 1; | |
| } else if (flag0 == flag1) { | |
| dev_current = 0; | |
| } else if (flag0 == 0xFF) { | |
| dev_current = 0; | |
| } else if (flag1 == 0xFF) { | |
| dev_current = 1; | |
| } else { | |
| dev_current = 0; | |
| } | |
| break; | |
| case FLAG_INCREMENTAL: | |
| if (flag0 == 255 && flag1 == 0) | |
| dev_current = 1; | |
| else if ((flag1 == 255 && flag0 == 0) || | |
| flag0 >= flag1) | |
| dev_current = 0; | |
| else /* flag1 > flag0 */ | |
| dev_current = 1; | |
| break; | |
| default: | |
| fprintf(stderr, "Unknown flag scheme %u\n", | |
| environment.flag_scheme); | |
| return -1; | |
| } | |
| } | |
| /* | |
| * If we are reading, we don't need the flag and the CRC any | |
| * more, if we are writing, we will re-calculate CRC and update | |
| * flags before writing out | |
| */ | |
| if (dev_current) { | |
| environment.image = addr1; | |
| environment.crc = &redundant1->crc; | |
| environment.flags = &redundant1->flags; | |
| environment.data = redundant1->data; | |
| free(addr0); | |
| } else { | |
| environment.image = addr0; | |
| environment.crc = &redundant0->crc; | |
| environment.flags = &redundant0->flags; | |
| environment.data = redundant0->data; | |
| free(addr1); | |
| } | |
| #ifdef DEBUG | |
| fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current)); | |
| #endif | |
| } | |
| return 0; | |
| open_cleanup: | |
| if (addr0) | |
| free(addr0); | |
| if (addr1) | |
| free(addr1); | |
| return ret; | |
| } | |
| /* | |
| * Simply free allocated buffer with environment | |
| */ | |
| int fw_env_close(struct env_opts *opts) | |
| { | |
| if (environment.image) | |
| free(environment.image); | |
| environment.image = NULL; | |
| return 0; | |
| } | |
| static int check_device_config(int dev) | |
| { | |
| struct stat st; | |
| int32_t lnum = 0; | |
| int fd, rc = 0; | |
| /* Fills in IS_UBI(), converts DEVNAME() with ubi volume name */ | |
| ubi_check_dev(dev); | |
| fd = open(DEVNAME(dev), O_RDONLY); | |
| if (fd < 0) { | |
| fprintf(stderr, | |
| "Cannot open %s: %s\n", DEVNAME(dev), strerror(errno)); | |
| return -1; | |
| } | |
| rc = fstat(fd, &st); | |
| if (rc < 0) { | |
| fprintf(stderr, "Cannot stat the file %s\n", DEVNAME(dev)); | |
| goto err; | |
| } | |
| if (IS_UBI(dev)) { | |
| rc = ioctl(fd, UBI_IOCEBISMAP, &lnum); | |
| if (rc < 0) { | |
| fprintf(stderr, "Cannot get UBI information for %s\n", | |
| DEVNAME(dev)); | |
| goto err; | |
| } | |
| } else if (S_ISCHR(st.st_mode)) { | |
| struct mtd_info_user mtdinfo; | |
| rc = ioctl(fd, MEMGETINFO, &mtdinfo); | |
| if (rc < 0) { | |
| fprintf(stderr, "Cannot get MTD information for %s\n", | |
| DEVNAME(dev)); | |
| goto err; | |
| } | |
| if (mtdinfo.type != MTD_NORFLASH && | |
| mtdinfo.type != MTD_NANDFLASH && | |
| mtdinfo.type != MTD_DATAFLASH && | |
| mtdinfo.type != MTD_UBIVOLUME) { | |
| fprintf(stderr, "Unsupported flash type %u on %s\n", | |
| mtdinfo.type, DEVNAME(dev)); | |
| goto err; | |
| } | |
| DEVTYPE(dev) = mtdinfo.type; | |
| if (DEVESIZE(dev) == 0 && ENVSECTORS(dev) == 0 && | |
| mtdinfo.type == MTD_NORFLASH) | |
| DEVESIZE(dev) = mtdinfo.erasesize; | |
| if (DEVESIZE(dev) == 0) | |
| /* Assume the erase size is the same as the env-size */ | |
| DEVESIZE(dev) = ENVSIZE(dev); | |
| } else { | |
| uint64_t size; | |
| DEVTYPE(dev) = MTD_ABSENT; | |
| if (DEVESIZE(dev) == 0) | |
| /* Assume the erase size to be 512 bytes */ | |
| DEVESIZE(dev) = 0x200; | |
| /* | |
| * Check for negative offsets, treat it as backwards offset | |
| * from the end of the block device | |
| */ | |
| if (DEVOFFSET(dev) < 0) { | |
| rc = ioctl(fd, BLKGETSIZE64, &size); | |
| if (rc < 0) { | |
| fprintf(stderr, | |
| "Could not get block device size on %s\n", | |
| DEVNAME(dev)); | |
| goto err; | |
| } | |
| DEVOFFSET(dev) = DEVOFFSET(dev) + size; | |
| #ifdef DEBUG | |
| fprintf(stderr, | |
| "Calculated device offset 0x%llx on %s\n", | |
| DEVOFFSET(dev), DEVNAME(dev)); | |
| #endif | |
| } | |
| } | |
| if (ENVSECTORS(dev) == 0) | |
| /* Assume enough sectors to cover the environment */ | |
| ENVSECTORS(dev) = DIV_ROUND_UP(ENVSIZE(dev), DEVESIZE(dev)); | |
| if (DEVOFFSET(dev) % DEVESIZE(dev) != 0) { | |
| fprintf(stderr, | |
| "Environment does not start on (erase) block boundary\n"); | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| if (ENVSIZE(dev) > ENVSECTORS(dev) * DEVESIZE(dev)) { | |
| fprintf(stderr, | |
| "Environment does not fit into available sectors\n"); | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| err: | |
| close(fd); | |
| return rc; | |
| } | |
| static int find_nvmem_device(void) | |
| { | |
| const char *path = "/sys/bus/nvmem/devices"; | |
| struct dirent *dent; | |
| char *nvmem = NULL; | |
| char comp[256]; | |
| char buf[32]; | |
| int bytes; | |
| DIR *dir; | |
| dir = opendir(path); | |
| if (!dir) { | |
| return -EIO; | |
| } | |
| while (!nvmem && (dent = readdir(dir))) { | |
| FILE *fp; | |
| if (!strcmp(dent->d_name, ".") || !strcmp(dent->d_name, "..")) { | |
| continue; | |
| } | |
| bytes = snprintf(comp, sizeof(comp), "%s/%s/of_node/compatible", path, dent->d_name); | |
| if (bytes < 0 || bytes == sizeof(comp)) { | |
| continue; | |
| } | |
| fp = fopen(comp, "r"); | |
| if (!fp) { | |
| continue; | |
| } | |
| fread(buf, sizeof(buf), 1, fp); | |
| if (!strcmp(buf, "u-boot,env")) { | |
| bytes = asprintf(&nvmem, "%s/%s/nvmem", path, dent->d_name); | |
| if (bytes < 0) { | |
| nvmem = NULL; | |
| } | |
| } | |
| fclose(fp); | |
| } | |
| closedir(dir); | |
| if (nvmem) { | |
| struct stat s; | |
| stat(nvmem, &s); | |
| DEVNAME(0) = nvmem; | |
| DEVOFFSET(0) = 0; | |
| ENVSIZE(0) = s.st_size; | |
| return 0; | |
| } | |
| return -ENOENT; | |
| } | |
| static int parse_config(struct env_opts *opts) | |
| { | |
| int rc; | |
| if (!opts) | |
| opts = &default_opts; | |
| #if defined(CONFIG_FILE) | |
| /* Fills in DEVNAME(), ENVSIZE(), DEVESIZE(). Or don't. */ | |
| if (get_config(opts->config_file)) { | |
| if (find_nvmem_device()) { | |
| fprintf(stderr, "Cannot parse config file '%s': %m\n", | |
| opts->config_file); | |
| fprintf(stderr, "Failed to find NVMEM device\n"); | |
| return -1; | |
| } | |
| } | |
| #else | |
| DEVNAME(0) = DEVICE1_NAME; | |
| DEVOFFSET(0) = DEVICE1_OFFSET; | |
| ENVSIZE(0) = ENV1_SIZE; | |
| /* Set defaults for DEVESIZE, ENVSECTORS later once we | |
| * know DEVTYPE | |
| */ | |
| #ifdef DEVICE1_ESIZE | |
| DEVESIZE(0) = DEVICE1_ESIZE; | |
| #endif | |
| #ifdef DEVICE1_ENVSECTORS | |
| ENVSECTORS(0) = DEVICE1_ENVSECTORS; | |
| #endif | |
| #ifdef HAVE_REDUND | |
| DEVNAME(1) = DEVICE2_NAME; | |
| DEVOFFSET(1) = DEVICE2_OFFSET; | |
| ENVSIZE(1) = ENV2_SIZE; | |
| /* Set defaults for DEVESIZE, ENVSECTORS later once we | |
| * know DEVTYPE | |
| */ | |
| #ifdef DEVICE2_ESIZE | |
| DEVESIZE(1) = DEVICE2_ESIZE; | |
| #endif | |
| #ifdef DEVICE2_ENVSECTORS | |
| ENVSECTORS(1) = DEVICE2_ENVSECTORS; | |
| #endif | |
| have_redund_env = 1; | |
| #endif | |
| #endif | |
| rc = check_device_config(0); | |
| if (rc < 0) | |
| return rc; | |
| if (have_redund_env) { | |
| rc = check_device_config(1); | |
| if (rc < 0) | |
| return rc; | |
| if (ENVSIZE(0) != ENVSIZE(1)) { | |
| fprintf(stderr, | |
| "Redundant environments have unequal size\n"); | |
| return -1; | |
| } | |
| } | |
| usable_envsize = CUR_ENVSIZE - sizeof(uint32_t); | |
| if (have_redund_env) | |
| usable_envsize -= sizeof(char); | |
| return 0; | |
| } | |
| #if defined(CONFIG_FILE) | |
| static int get_config(char *fname) | |
| { | |
| FILE *fp; | |
| int i = 0; | |
| int rc; | |
| char *line = NULL; | |
| size_t linesize = 0; | |
| char *devname; | |
| fp = fopen(fname, "r"); | |
| if (fp == NULL) | |
| return -1; | |
| while (i < 2 && getline(&line, &linesize, fp) != -1) { | |
| /* Skip comment strings */ | |
| if (line[0] == '#') | |
| continue; | |
| rc = sscanf(line, "%ms %lli %lx %lx %lx", | |
| &devname, | |
| &DEVOFFSET(i), | |
| &ENVSIZE(i), &DEVESIZE(i), &ENVSECTORS(i)); | |
| if (rc < 3) | |
| continue; | |
| DEVNAME(i) = devname; | |
| /* Set defaults for DEVESIZE, ENVSECTORS later once we | |
| * know DEVTYPE | |
| */ | |
| i++; | |
| } | |
| free(line); | |
| fclose(fp); | |
| have_redund_env = i - 1; | |
| if (!i) { /* No valid entries found */ | |
| errno = EINVAL; | |
| return -1; | |
| } else | |
| return 0; | |
| } | |
| #endif |