| # This file contains help messages for missing external blobs. Each message has | |
| # a tag (MUST be just lower-case text, digits and hyphens) starting in column 1, | |
| # followed by a colon (:) to indicate its start. The message can include any | |
| # number of lines, including blank lines. | |
| # | |
| # When looking for a tag, Binman uses the value of 'missing-msg' for the entry, | |
| # the entry name or the entry type, in that order | |
| atf-bl31: | |
| See the documentation for your board. You may need to build ARM Trusted | |
| Firmware and build with BL31=/path/to/bl31.bin | |
| atf-bl31-sunxi: | |
| Please read the section on ARM Trusted Firmware (ATF) in | |
| board/sunxi/README.sunxi64 | |
| scp-sunxi: | |
| SCP firmware is required for system suspend, but is otherwise optional. | |
| Please read the section on SCP firmware in board/sunxi/README.sunxi64 | |
| iot2050-seboot: | |
| See the documentation for IOT2050 board. Your image is missing SEBoot | |
| which is mandatory for board startup. Prebuilt SEBoot located at | |
| meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. | |
| iot2050-otpcmd: | |
| See the documentation for IOT2050 board. Your image is missing OTP command data | |
| block which is used for provisioning the customer keys to the board. | |
| Please refer to | |
| meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh | |
| for how to generate this binary. If you are not using secure boot or do not | |
| intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD. | |
| k3-rti-wdt-firmware: | |
| If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for | |
| the R5F core(s) to trigger the system reset. One possible source is | |
| https://github.com/siemens/k3-rti-wdt. | |
| rockchip-tpl: | |
| An external TPL is required to initialize DRAM. Get the external TPL | |
| binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source | |
| for the external TPL binary is https://github.com/rockchip-linux/rkbin. | |
| tee-os: | |
| See the documentation for your board. You may need to build Open Portable | |
| Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin | |
| opensbi: | |
| See the documentation for your board. The OpenSBI git repo is at | |
| https://github.com/riscv/opensbi.git | |
| You may need to build fw_dynamic.bin first and re-build u-boot with | |
| OPENSBI=/path/to/fw_dynamic.bin |