| .. SPDX-License-Identifier: GPL-2.0+ | |
| .. index:: | |
| single: fwu_mdata_read (command) | |
| fwu_mdata_read command | |
| ====================== | |
| Synopsis | |
| -------- | |
| :: | |
| fwu_mdata_read | |
| Description | |
| ----------- | |
| The fwu_mdata_read command is used to read the FWU metadata | |
| structure. The command prints out information about the current active | |
| bank, the previous active bank, image GUIDs, image acceptance etc. | |
| The output may look like: | |
| :: | |
| => fwu_mdata_read | |
| FWU Metadata | |
| crc32: 0xec4fb997 | |
| version: 0x1 | |
| active_index: 0x0 | |
| previous_active_index: 0x1 | |
| Image Info | |
| Image Type Guid: 19D5DF83-11B0-457B-BE2C-7559C13142A5 | |
| Location Guid: 49272BEB-8DD8-46DF-8D75-356C65EFF417 | |
| Image Guid: D57428CC-BB9A-42E0-AA36-3F5A132059C7 | |
| Image Acceptance: yes | |
| Image Guid: 2BE37D6D-8281-4938-BD7B-9A5BBF80869F | |
| Image Acceptance: yes | |
| Configuration | |
| ------------- | |
| To use the fwu_mdata_read command, CONFIG_CMD_FWU_METADATA needs to be | |
| enabled. |