| CONFIG_PPC=y | |
| CONFIG_TEXT_BASE=0xFFF40000 | |
| CONFIG_SYS_MALLOC_LEN=0x100000 | |
| CONFIG_SF_DEFAULT_SPEED=10000000 | |
| CONFIG_ENV_SIZE=0x2000 | |
| CONFIG_ENV_OFFSET=0x100000 | |
| CONFIG_ENV_SECT_SIZE=0x10000 | |
| CONFIG_DEFAULT_DEVICE_TREE="p2041rdb" | |
| CONFIG_SYS_MONITOR_LEN=786432 | |
| CONFIG_MPC85xx=y | |
| CONFIG_SYS_INIT_RAM_LOCK=y | |
| CONFIG_SYS_SRIO=y | |
| CONFIG_SRIO1=y | |
| CONFIG_SRIO2=y | |
| CONFIG_SRIO_PCIE_BOOT_MASTER=y | |
| CONFIG_TARGET_P2041RDB=y | |
| CONFIG_MPC85XX_HAVE_RESET_VECTOR=y | |
| CONFIG_ENABLE_36BIT_PHYS=y | |
| CONFIG_SYS_BOOK3E_HV=y | |
| CONFIG_SYS_CACHE_STASHING=y | |
| CONFIG_USE_UBOOTPATH=y | |
| CONFIG_PCIE1=y | |
| CONFIG_PCIE2=y | |
| CONFIG_PCIE3=y | |
| CONFIG_SYS_FSL_NUM_CC_PLLS=2 | |
| CONFIG_MP=y | |
| CONFIG_DYNAMIC_SYS_CLK_FREQ=y | |
| CONFIG_FIT=y | |
| CONFIG_FIT_VERBOSE=y | |
| CONFIG_RAMBOOT_PBL=y | |
| CONFIG_SPIFLASH=y | |
| CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg" | |
| CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg" | |
| CONFIG_BOOTDELAY=10 | |
| CONFIG_OF_BOARD_SETUP=y | |
| CONFIG_OF_STDOUT_VIA_ALIAS=y | |
| CONFIG_USE_BOOTCOMMAND=y | |
| CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" | |
| CONFIG_ARCH_MISC_INIT=y | |
| CONFIG_BOARD_EARLY_INIT_F=y | |
| CONFIG_BOARD_EARLY_INIT_R=y | |
| CONFIG_ID_EEPROM=y | |
| CONFIG_HUSH_PARSER=y | |
| CONFIG_SYS_PBSIZE=276 | |
| CONFIG_CMD_IMLS=y | |
| CONFIG_CMD_GREPENV=y | |
| CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 | |
| CONFIG_CMD_DM=y | |
| CONFIG_CMD_I2C=y | |
| CONFIG_LOADS_ECHO=y | |
| CONFIG_SYS_LOADS_BAUD_CHANGE=y | |
| CONFIG_CMD_MMC=y | |
| CONFIG_CMD_USB=y | |
| CONFIG_CMD_DHCP=y | |
| CONFIG_CMD_MII=y | |
| CONFIG_CMD_PING=y | |
| CONFIG_CMD_EXT2=y | |
| CONFIG_CMD_FAT=y | |
| CONFIG_OF_CONTROL=y | |
| CONFIG_ENV_OVERWRITE=y | |
| CONFIG_ENV_IS_IN_SPI_FLASH=y | |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y | |
| CONFIG_USE_BOOTFILE=y | |
| CONFIG_BOOTFILE="uImage" | |
| CONFIG_USE_ETHPRIME=y | |
| CONFIG_ETHPRIME="FM1@DTSEC1" | |
| CONFIG_USE_ROOTPATH=y | |
| CONFIG_FSL_SATA_V2=y | |
| CONFIG_SYS_SATA_MAX_DEVICE=2 | |
| CONFIG_FSL_CAAM=y | |
| CONFIG_SYS_BR0_PRELIM_BOOL=y | |
| CONFIG_SYS_BR0_PRELIM=0xE8001001 | |
| CONFIG_SYS_OR0_PRELIM=0xF8000F85 | |
| CONFIG_SYS_BR3_PRELIM_BOOL=y | |
| CONFIG_SYS_BR3_PRELIM=0xFFDF0801 | |
| CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 | |
| CONFIG_DM_I2C=y | |
| CONFIG_I2C_SET_DEFAULT_BUS_NUM=y | |
| CONFIG_SYS_I2C_FSL=y | |
| CONFIG_SYS_I2C_EEPROM_ADDR=0x50 | |
| CONFIG_FSL_ESDHC=y | |
| CONFIG_MTD=y | |
| CONFIG_MTD_NOR_FLASH=y | |
| CONFIG_FLASH_CFI_DRIVER=y | |
| CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y | |
| CONFIG_SYS_FLASH_EMPTY_INFO=y | |
| CONFIG_SYS_FLASH_CFI=y | |
| CONFIG_SYS_FLASH_QUIET_TEST=y | |
| CONFIG_SYS_MAX_FLASH_SECT=1024 | |
| CONFIG_DM_SPI_FLASH=y | |
| CONFIG_SPI_FLASH_SPANSION=y | |
| CONFIG_PHYLIB=y | |
| CONFIG_PHYLIB_10G=y | |
| CONFIG_PHY_TERANETICS=y | |
| CONFIG_PHY_VITESSE=y | |
| CONFIG_DM_MDIO=y | |
| CONFIG_PHY_GIGE=y | |
| CONFIG_E1000=y | |
| CONFIG_FMAN_ENET=y | |
| CONFIG_SYS_FMAN_FW_ADDR=0x110000 | |
| CONFIG_MII=y | |
| CONFIG_PCIE_FSL=y | |
| CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y | |
| CONFIG_SYS_NS16550_SERIAL=y | |
| CONFIG_SPI=y | |
| CONFIG_DM_SPI=y | |
| CONFIG_FSL_ESPI=y | |
| CONFIG_USB=y | |
| CONFIG_USB_EHCI_FSL=y | |
| CONFIG_USB_MAX_CONTROLLER_COUNT=2 | |
| CONFIG_USB_STORAGE=y | |
| CONFIG_ADDR_MAP=y | |
| CONFIG_SYS_NUM_ADDR_MAP=64 | |
| CONFIG_POST=y |