| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2015 Google, Inc | |
| * | |
| * (C) Copyright 2008-2014 Rockchip Electronics | |
| * Peter, Software Engineering, <superpeter.cai@gmail.com>. | |
| */ | |
| #include <clk.h> | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <i2c.h> | |
| #include <log.h> | |
| #include <asm/io.h> | |
| #include <asm/arch-rockchip/clock.h> | |
| #include <asm/arch-rockchip/i2c.h> | |
| #include <asm/arch-rockchip/periph.h> | |
| #include <dm/pinctrl.h> | |
| #include <linux/delay.h> | |
| #include <linux/sizes.h> | |
| /* i2c timerout */ | |
| #define I2C_TIMEOUT_MS 100 | |
| #define I2C_RETRY_COUNT 3 | |
| /* rk i2c fifo max transfer bytes */ | |
| #define RK_I2C_FIFO_SIZE 32 | |
| struct rk_i2c { | |
| struct clk clk; | |
| struct i2c_regs *regs; | |
| unsigned int speed; | |
| }; | |
| enum { | |
| RK_I2C_LEGACY, | |
| RK_I2C_NEW, | |
| }; | |
| /** | |
| * @controller_type: i2c controller type | |
| */ | |
| struct rk_i2c_soc_data { | |
| int controller_type; | |
| }; | |
| static inline void rk_i2c_get_div(int div, int *divh, int *divl) | |
| { | |
| *divl = div / 2; | |
| if (div % 2 == 0) | |
| *divh = div / 2; | |
| else | |
| *divh = DIV_ROUND_UP(div, 2); | |
| } | |
| /* | |
| * SCL Divisor = 8 * (CLKDIVL+1 + CLKDIVH+1) | |
| * SCL = PCLK / SCLK Divisor | |
| * i2c_rate = PCLK | |
| */ | |
| static void rk_i2c_set_clk(struct rk_i2c *i2c, uint32_t scl_rate) | |
| { | |
| uint32_t i2c_rate; | |
| int div, divl, divh; | |
| /* First get i2c rate from pclk */ | |
| i2c_rate = clk_get_rate(&i2c->clk); | |
| div = DIV_ROUND_UP(i2c_rate, scl_rate * 8) - 2; | |
| divh = 0; | |
| divl = 0; | |
| if (div >= 0) | |
| rk_i2c_get_div(div, &divh, &divl); | |
| writel(I2C_CLKDIV_VAL(divl, divh), &i2c->regs->clkdiv); | |
| debug("rk_i2c_set_clk: i2c rate = %d, scl rate = %d\n", i2c_rate, | |
| scl_rate); | |
| debug("set i2c clk div = %d, divh = %d, divl = %d\n", div, divh, divl); | |
| debug("set clk(I2C_CLKDIV: 0x%08x)\n", readl(&i2c->regs->clkdiv)); | |
| } | |
| static void rk_i2c_show_regs(struct i2c_regs *regs) | |
| { | |
| #ifdef DEBUG | |
| uint i; | |
| debug("i2c_con: 0x%08x\n", readl(®s->con)); | |
| debug("i2c_clkdiv: 0x%08x\n", readl(®s->clkdiv)); | |
| debug("i2c_mrxaddr: 0x%08x\n", readl(®s->mrxaddr)); | |
| debug("i2c_mrxraddR: 0x%08x\n", readl(®s->mrxraddr)); | |
| debug("i2c_mtxcnt: 0x%08x\n", readl(®s->mtxcnt)); | |
| debug("i2c_mrxcnt: 0x%08x\n", readl(®s->mrxcnt)); | |
| debug("i2c_ien: 0x%08x\n", readl(®s->ien)); | |
| debug("i2c_ipd: 0x%08x\n", readl(®s->ipd)); | |
| debug("i2c_fcnt: 0x%08x\n", readl(®s->fcnt)); | |
| for (i = 0; i < 8; i++) | |
| debug("i2c_txdata%d: 0x%08x\n", i, readl(®s->txdata[i])); | |
| for (i = 0; i < 8; i++) | |
| debug("i2c_rxdata%d: 0x%08x\n", i, readl(®s->rxdata[i])); | |
| #endif | |
| } | |
| static int rk_i2c_send_start_bit(struct rk_i2c *i2c) | |
| { | |
| struct i2c_regs *regs = i2c->regs; | |
| ulong start; | |
| debug("I2c Send Start bit.\n"); | |
| writel(I2C_IPD_ALL_CLEAN, ®s->ipd); | |
| writel(I2C_CON_EN | I2C_CON_START, ®s->con); | |
| writel(I2C_STARTIEN, ®s->ien); | |
| start = get_timer(0); | |
| while (1) { | |
| if (readl(®s->ipd) & I2C_STARTIPD) { | |
| writel(I2C_STARTIPD, ®s->ipd); | |
| break; | |
| } | |
| if (get_timer(start) > I2C_TIMEOUT_MS) { | |
| debug("I2C Send Start Bit Timeout\n"); | |
| rk_i2c_show_regs(regs); | |
| return -ETIMEDOUT; | |
| } | |
| udelay(1); | |
| } | |
| return 0; | |
| } | |
| static int rk_i2c_send_stop_bit(struct rk_i2c *i2c) | |
| { | |
| struct i2c_regs *regs = i2c->regs; | |
| ulong start; | |
| debug("I2c Send Stop bit.\n"); | |
| writel(I2C_IPD_ALL_CLEAN, ®s->ipd); | |
| writel(I2C_CON_EN | I2C_CON_STOP, ®s->con); | |
| writel(I2C_STOPIEN, ®s->ien); | |
| start = get_timer(0); | |
| while (1) { | |
| if (readl(®s->ipd) & I2C_STOPIPD) { | |
| writel(I2C_STOPIPD, ®s->ipd); | |
| break; | |
| } | |
| if (get_timer(start) > I2C_TIMEOUT_MS) { | |
| debug("I2C Send Start Bit Timeout\n"); | |
| rk_i2c_show_regs(regs); | |
| return -ETIMEDOUT; | |
| } | |
| udelay(1); | |
| } | |
| return 0; | |
| } | |
| static inline void rk_i2c_disable(struct rk_i2c *i2c) | |
| { | |
| writel(0, &i2c->regs->con); | |
| } | |
| static int rk_i2c_read(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len, | |
| uchar *buf, uint b_len) | |
| { | |
| struct i2c_regs *regs = i2c->regs; | |
| uchar *pbuf = buf; | |
| uint bytes_remain_len = b_len; | |
| uint bytes_xferred = 0; | |
| uint words_xferred = 0; | |
| ulong start; | |
| uint con = 0; | |
| uint rxdata; | |
| uint i, j; | |
| int err; | |
| bool snd_chunk = false; | |
| debug("rk_i2c_read: chip = %d, reg = %d, r_len = %d, b_len = %d\n", | |
| chip, reg, r_len, b_len); | |
| err = rk_i2c_send_start_bit(i2c); | |
| if (err) | |
| return err; | |
| writel(I2C_MRXADDR_SET(1, chip << 1 | 1), ®s->mrxaddr); | |
| if (r_len == 0) { | |
| writel(0, ®s->mrxraddr); | |
| } else if (r_len < 4) { | |
| writel(I2C_MRXRADDR_SET(r_len, reg), ®s->mrxraddr); | |
| } else { | |
| debug("I2C Read: addr len %d not supported\n", r_len); | |
| return -EIO; | |
| } | |
| while (bytes_remain_len) { | |
| if (bytes_remain_len > RK_I2C_FIFO_SIZE) { | |
| /* | |
| * The hw can read up to 32 bytes at a time. If we need | |
| * more than one chunk, send an ACK after the last byte | |
| * of the current chunk. | |
| */ | |
| con = I2C_CON_EN; | |
| bytes_xferred = 32; | |
| } else { | |
| con = I2C_CON_EN | I2C_CON_LASTACK; | |
| bytes_xferred = bytes_remain_len; | |
| } | |
| words_xferred = DIV_ROUND_UP(bytes_xferred, 4); | |
| /* | |
| * make sure we are in plain RX mode if we read a second chunk | |
| */ | |
| if (snd_chunk) | |
| con |= I2C_CON_MOD(I2C_MODE_RX); | |
| else | |
| con |= I2C_CON_MOD(I2C_MODE_TRX); | |
| writel(con, ®s->con); | |
| writel(bytes_xferred, ®s->mrxcnt); | |
| writel(I2C_MBRFIEN | I2C_NAKRCVIEN, ®s->ien); | |
| start = get_timer(0); | |
| while (1) { | |
| if (readl(®s->ipd) & I2C_NAKRCVIPD) { | |
| writel(I2C_NAKRCVIPD, ®s->ipd); | |
| err = -EREMOTEIO; | |
| } | |
| if (readl(®s->ipd) & I2C_MBRFIPD) { | |
| writel(I2C_MBRFIPD, ®s->ipd); | |
| break; | |
| } | |
| if (get_timer(start) > I2C_TIMEOUT_MS) { | |
| debug("I2C Read Data Timeout\n"); | |
| err = -ETIMEDOUT; | |
| rk_i2c_show_regs(regs); | |
| goto i2c_exit; | |
| } | |
| udelay(1); | |
| } | |
| for (i = 0; i < words_xferred; i++) { | |
| rxdata = readl(®s->rxdata[i]); | |
| debug("I2c Read RXDATA[%d] = 0x%x\n", i, rxdata); | |
| for (j = 0; j < 4; j++) { | |
| if ((i * 4 + j) == bytes_xferred) | |
| break; | |
| *pbuf++ = (rxdata >> (j * 8)) & 0xff; | |
| } | |
| } | |
| bytes_remain_len -= bytes_xferred; | |
| snd_chunk = true; | |
| debug("I2C Read bytes_remain_len %d\n", bytes_remain_len); | |
| } | |
| i2c_exit: | |
| return err; | |
| } | |
| static int rk_i2c_write(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len, | |
| uchar *buf, uint b_len) | |
| { | |
| struct i2c_regs *regs = i2c->regs; | |
| int err; | |
| uchar *pbuf = buf; | |
| uint bytes_remain_len = b_len + r_len + 1; | |
| uint bytes_xferred = 0; | |
| uint words_xferred = 0; | |
| ulong start; | |
| uint txdata; | |
| uint i, j; | |
| debug("rk_i2c_write: chip = %d, reg = %d, r_len = %d, b_len = %d\n", | |
| chip, reg, r_len, b_len); | |
| err = rk_i2c_send_start_bit(i2c); | |
| if (err) | |
| return err; | |
| while (bytes_remain_len) { | |
| if (bytes_remain_len > RK_I2C_FIFO_SIZE) | |
| bytes_xferred = RK_I2C_FIFO_SIZE; | |
| else | |
| bytes_xferred = bytes_remain_len; | |
| words_xferred = DIV_ROUND_UP(bytes_xferred, 4); | |
| for (i = 0; i < words_xferred; i++) { | |
| txdata = 0; | |
| for (j = 0; j < 4; j++) { | |
| if ((i * 4 + j) == bytes_xferred) | |
| break; | |
| if (i == 0 && j == 0 && pbuf == buf) { | |
| txdata |= (chip << 1); | |
| } else if (i == 0 && j <= r_len && pbuf == buf) { | |
| txdata |= (reg & | |
| (0xff << ((j - 1) * 8))) << 8; | |
| } else { | |
| txdata |= (*pbuf++)<<(j * 8); | |
| } | |
| } | |
| writel(txdata, ®s->txdata[i]); | |
| debug("I2c Write TXDATA[%d] = 0x%08x\n", i, txdata); | |
| } | |
| writel(I2C_CON_EN | I2C_CON_MOD(I2C_MODE_TX), ®s->con); | |
| writel(bytes_xferred, ®s->mtxcnt); | |
| writel(I2C_MBTFIEN | I2C_NAKRCVIEN, ®s->ien); | |
| start = get_timer(0); | |
| while (1) { | |
| if (readl(®s->ipd) & I2C_NAKRCVIPD) { | |
| writel(I2C_NAKRCVIPD, ®s->ipd); | |
| err = -EREMOTEIO; | |
| } | |
| if (readl(®s->ipd) & I2C_MBTFIPD) { | |
| writel(I2C_MBTFIPD, ®s->ipd); | |
| break; | |
| } | |
| if (get_timer(start) > I2C_TIMEOUT_MS) { | |
| debug("I2C Write Data Timeout\n"); | |
| err = -ETIMEDOUT; | |
| rk_i2c_show_regs(regs); | |
| goto i2c_exit; | |
| } | |
| udelay(1); | |
| } | |
| bytes_remain_len -= bytes_xferred; | |
| debug("I2C Write bytes_remain_len %d\n", bytes_remain_len); | |
| } | |
| i2c_exit: | |
| return err; | |
| } | |
| static int rockchip_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, | |
| int nmsgs) | |
| { | |
| struct rk_i2c *i2c = dev_get_priv(bus); | |
| int ret = 0; | |
| debug("i2c_xfer: %d messages\n", nmsgs); | |
| for (; nmsgs > 0; nmsgs--, msg++) { | |
| debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len); | |
| if (msg->flags & I2C_M_RD) { | |
| ret = rk_i2c_read(i2c, msg->addr, 0, 0, msg->buf, | |
| msg->len); | |
| } else { | |
| ret = rk_i2c_write(i2c, msg->addr, 0, 0, msg->buf, | |
| msg->len); | |
| } | |
| if (ret) { | |
| debug("i2c_write: error sending\n"); | |
| ret = -EREMOTEIO; | |
| break; | |
| } | |
| /* | |
| * The HW is actually not capable of REPEATED START. But we can | |
| * get the intended effect by resetting its internal state | |
| * and issuing an ordinary START. | |
| * | |
| * Do NOT disable the controller after the last message (before | |
| * sending the STOP condition) as this triggers an illegal | |
| * START condition followed by a STOP condition. | |
| */ | |
| if (nmsgs > 1) | |
| rk_i2c_disable(i2c); | |
| } | |
| rk_i2c_send_stop_bit(i2c); | |
| rk_i2c_disable(i2c); | |
| return ret; | |
| } | |
| int rockchip_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) | |
| { | |
| struct rk_i2c *i2c = dev_get_priv(bus); | |
| rk_i2c_set_clk(i2c, speed); | |
| return 0; | |
| } | |
| static int rockchip_i2c_of_to_plat(struct udevice *bus) | |
| { | |
| struct rk_i2c *priv = dev_get_priv(bus); | |
| int ret; | |
| ret = clk_get_by_index(bus, 0, &priv->clk); | |
| if (ret < 0) { | |
| debug("%s: Could not get clock for %s: %d\n", __func__, | |
| bus->name, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int rockchip_i2c_probe(struct udevice *bus) | |
| { | |
| struct rk_i2c *priv = dev_get_priv(bus); | |
| struct rk_i2c_soc_data *soc_data; | |
| struct udevice *pinctrl; | |
| int bus_nr; | |
| int ret; | |
| priv->regs = dev_read_addr_ptr(bus); | |
| soc_data = (struct rk_i2c_soc_data*)dev_get_driver_data(bus); | |
| if (soc_data->controller_type == RK_I2C_LEGACY) { | |
| ret = dev_read_alias_seq(bus, &bus_nr); | |
| if (ret < 0) { | |
| debug("%s: Could not get alias for %s: %d\n", | |
| __func__, bus->name, ret); | |
| return ret; | |
| } | |
| ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); | |
| if (ret) { | |
| debug("%s: Cannot find pinctrl device\n", __func__); | |
| return ret; | |
| } | |
| /* pinctrl will switch I2C to new type */ | |
| ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_I2C0 + bus_nr); | |
| if (ret) { | |
| debug("%s: Failed to switch I2C to new type %s: %d\n", | |
| __func__, bus->name, ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static const struct dm_i2c_ops rockchip_i2c_ops = { | |
| .xfer = rockchip_i2c_xfer, | |
| .set_bus_speed = rockchip_i2c_set_bus_speed, | |
| }; | |
| static const struct rk_i2c_soc_data rk3066_soc_data = { | |
| .controller_type = RK_I2C_LEGACY, | |
| }; | |
| static const struct rk_i2c_soc_data rk3188_soc_data = { | |
| .controller_type = RK_I2C_LEGACY, | |
| }; | |
| static const struct rk_i2c_soc_data rk3228_soc_data = { | |
| .controller_type = RK_I2C_NEW, | |
| }; | |
| static const struct rk_i2c_soc_data rk3288_soc_data = { | |
| .controller_type = RK_I2C_NEW, | |
| }; | |
| static const struct rk_i2c_soc_data rk3328_soc_data = { | |
| .controller_type = RK_I2C_NEW, | |
| }; | |
| static const struct rk_i2c_soc_data rk3399_soc_data = { | |
| .controller_type = RK_I2C_NEW, | |
| }; | |
| static const struct udevice_id rockchip_i2c_ids[] = { | |
| { | |
| .compatible = "rockchip,rk3066-i2c", | |
| .data = (ulong)&rk3066_soc_data, | |
| }, | |
| { | |
| .compatible = "rockchip,rk3188-i2c", | |
| .data = (ulong)&rk3188_soc_data, | |
| }, | |
| { | |
| .compatible = "rockchip,rk3228-i2c", | |
| .data = (ulong)&rk3228_soc_data, | |
| }, | |
| { | |
| .compatible = "rockchip,rk3288-i2c", | |
| .data = (ulong)&rk3288_soc_data, | |
| }, | |
| { | |
| .compatible = "rockchip,rk3328-i2c", | |
| .data = (ulong)&rk3328_soc_data, | |
| }, | |
| { | |
| .compatible = "rockchip,rk3399-i2c", | |
| .data = (ulong)&rk3399_soc_data, | |
| }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(rockchip_rk3066_i2c) = { | |
| .name = "rockchip_rk3066_i2c", | |
| .id = UCLASS_I2C, | |
| .of_match = rockchip_i2c_ids, | |
| .of_to_plat = rockchip_i2c_of_to_plat, | |
| .probe = rockchip_i2c_probe, | |
| .priv_auto = sizeof(struct rk_i2c), | |
| .ops = &rockchip_i2c_ops, | |
| }; | |
| DM_DRIVER_ALIAS(rockchip_rk3066_i2c, rockchip_rk3288_i2c) |