| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright 2019 NXP | |
| */ | |
| #include <common.h> | |
| #include <cpu.h> | |
| #include <dm.h> | |
| #include <thermal.h> | |
| #include <asm/global_data.h> | |
| #include <asm/system.h> | |
| #include <firmware/linux/imx/sci/sci.h> | |
| #include <asm/arch/sys_proto.h> | |
| #include <asm/arch-imx/cpu.h> | |
| #include <asm/armv8/cpu.h> | |
| #include <linux/bitops.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| struct cpu_imx_plat { | |
| const char *name; | |
| const char *rev; | |
| const char *type; | |
| u32 cpu_rsrc; | |
| u32 cpurev; | |
| u32 freq_mhz; | |
| u32 mpidr; | |
| }; | |
| const char *get_imx9_type(u32 imxtype) | |
| { | |
| switch (imxtype) { | |
| case MXC_CPU_IMX93: | |
| return "93"; | |
| default: | |
| return "??"; | |
| } | |
| } | |
| const char *get_imx9_rev(u32 rev) | |
| { | |
| switch (rev) { | |
| case CHIP_REV_1_0: | |
| return "1."; | |
| case CHIP_REV_B: | |
| return "B"; | |
| case CHIP_REV_C: | |
| return "C"; | |
| default: | |
| return "?"; | |
| } | |
| } | |
| static void set_core_data(struct udevice *dev) | |
| { | |
| struct cpu_imx_plat *plat = dev_get_plat(dev); | |
| if (device_is_compatible(dev, "arm,cortex-a35")) | |
| plat->name = "A35"; | |
| else | |
| plat->name = "?"; | |
| } | |
| #if IS_ENABLED(CONFIG_IMX_SCU_THERMAL) | |
| static int cpu_imx_get_temp(struct cpu_imx_plat *plat) | |
| { | |
| struct udevice *thermal_dev; | |
| int cpu_tmp, ret; | |
| int idx = 1; /* use "cpu-thermal0" device */ | |
| if (plat->cpu_rsrc == SC_R_A72) | |
| idx = 2; /* use "cpu-thermal1" device */ | |
| ret = uclass_get_device(UCLASS_THERMAL, idx, &thermal_dev); | |
| if (!ret) { | |
| ret = thermal_get_temp(thermal_dev, &cpu_tmp); | |
| if (ret) | |
| return 0xdeadbeef; | |
| } else { | |
| return 0xdeadbeef; | |
| } | |
| return cpu_tmp; | |
| } | |
| #else | |
| static int cpu_imx_get_temp(struct cpu_imx_plat *plat) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size) | |
| { | |
| struct cpu_imx_plat *plat = dev_get_plat(dev); | |
| int ret, temp; | |
| if (size < 100) | |
| return -ENOSPC; | |
| ret = snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz", | |
| plat->type, plat->rev, plat->name, plat->freq_mhz); | |
| if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) { | |
| temp = cpu_imx_get_temp(plat); | |
| buf = buf + ret; | |
| size = size - ret; | |
| if (temp != 0xdeadbeef) | |
| ret = snprintf(buf, size, " at %dC", temp); | |
| else | |
| ret = snprintf(buf, size, " - invalid sensor data"); | |
| } | |
| snprintf(buf + ret, size - ret, "\n"); | |
| return 0; | |
| } | |
| static int cpu_imx_get_info(const struct udevice *dev, struct cpu_info *info) | |
| { | |
| struct cpu_imx_plat *plat = dev_get_plat(dev); | |
| info->cpu_freq = plat->freq_mhz * 1000; | |
| info->features = BIT(CPU_FEAT_L1_CACHE) | BIT(CPU_FEAT_MMU); | |
| return 0; | |
| } | |
| static int cpu_imx_get_count(const struct udevice *dev) | |
| { | |
| ofnode node; | |
| int num = 0; | |
| ofnode_for_each_subnode(node, dev_ofnode(dev->parent)) { | |
| const char *device_type; | |
| if (!ofnode_is_enabled(node)) | |
| continue; | |
| device_type = ofnode_read_string(node, "device_type"); | |
| if (!device_type) | |
| continue; | |
| if (!strcmp(device_type, "cpu")) | |
| num++; | |
| } | |
| return num; | |
| } | |
| static int cpu_imx_get_vendor(const struct udevice *dev, char *buf, int size) | |
| { | |
| snprintf(buf, size, "NXP"); | |
| return 0; | |
| } | |
| static int cpu_imx_is_current(struct udevice *dev) | |
| { | |
| struct cpu_imx_plat *plat = dev_get_plat(dev); | |
| if (plat->mpidr == (read_mpidr() & 0xffff)) | |
| return 1; | |
| return 0; | |
| } | |
| static const struct cpu_ops cpu_imx9_ops = { | |
| .get_desc = cpu_imx_get_desc, | |
| .get_info = cpu_imx_get_info, | |
| .get_count = cpu_imx_get_count, | |
| .get_vendor = cpu_imx_get_vendor, | |
| .is_current = cpu_imx_is_current, | |
| }; | |
| static const struct udevice_id cpu_imx9_ids[] = { | |
| { .compatible = "arm,cortex-a35" }, | |
| { .compatible = "arm,cortex-a53" }, | |
| { .compatible = "arm,cortex-a72" }, | |
| { } | |
| }; | |
| static ulong imx9_get_cpu_rate(struct udevice *dev) | |
| { | |
| struct cpu_imx_plat *plat = dev_get_plat(dev); | |
| ulong rate; | |
| int ret; | |
| ret = sc_pm_get_clock_rate(-1, plat->cpu_rsrc, SC_PM_CLK_CPU, | |
| (sc_pm_clock_rate_t *)&rate); | |
| if (ret) { | |
| printf("Could not read CPU frequency: %d\n", ret); | |
| return 0; | |
| } | |
| return rate; | |
| } | |
| static int imx9_cpu_probe(struct udevice *dev) | |
| { | |
| struct cpu_imx_plat *plat = dev_get_plat(dev); | |
| u32 cpurev; | |
| set_core_data(dev); | |
| cpurev = get_cpu_rev(); | |
| plat->cpurev = cpurev; | |
| plat->rev = get_imx9_rev(cpurev & 0xFFF); | |
| plat->type = get_imx9_type((cpurev & 0xFF000) >> 12); | |
| plat->freq_mhz = imx9_get_cpu_rate(dev) / 1000000; | |
| plat->mpidr = dev_read_addr(dev); | |
| if (plat->mpidr == FDT_ADDR_T_NONE) { | |
| printf("%s: Failed to get CPU reg property\n", __func__); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| U_BOOT_DRIVER(cpu_imx9_drv) = { | |
| .name = "imx9x_cpu", | |
| .id = UCLASS_CPU, | |
| .of_match = cpu_imx9_ids, | |
| .ops = &cpu_imx9_ops, | |
| .probe = imx9_cpu_probe, | |
| .plat_auto = sizeof(struct cpu_imx_plat), | |
| .flags = DM_FLAG_PRE_RELOC, | |
| }; |