| .. SPDX-License-Identifier: GPL-2.0-or-later | |
| .. index:: | |
| single: temperature (command) | |
| temperature command | |
| =================== | |
| Synopsis | |
| -------- | |
| :: | |
| temperature list | |
| temperature get [thermal device name] | |
| Description | |
| ----------- | |
| The *temperature* command is used to list thermal sensors and get their | |
| readings. | |
| The 'temperature list' command diplays the available thermal devices. | |
| The 'temperature get' command is used to get the reading in degrees C from | |
| the desired device which is selected by passing its device name. | |
| thermal device name | |
| device name of thermal sensor to select | |
| Example | |
| ------- | |
| :: | |
| => temperature list | |
| | Device | Driver | Parent | |
| | tmon@610508110 | sparx5-temp | axi@600000000 | |
| => | |
| => temperature get tmon@610508110 | |
| tmon@610508110: 42 C | |
| Configuration | |
| ------------- | |
| The *temperature* command is only available if CONFIG_CMD_TEMPERATURE=y. |