| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * 64-bit Periodic Interval Timer driver | |
| * | |
| * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries | |
| * | |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> | |
| */ | |
| #include <clk.h> | |
| #include <dm.h> | |
| #include <timer.h> | |
| #include <asm/io.h> | |
| #define MCHP_PIT64B_CR 0x00 /* Control Register */ | |
| #define MCHP_PIT64B_CR_START BIT(0) | |
| #define MCHP_PIT64B_CR_SWRST BIT(8) | |
| #define MCHP_PIT64B_MR 0x04 /* Mode Register */ | |
| #define MCHP_PIT64B_MR_CONT BIT(0) | |
| #define MCHP_PIT64B_LSB_PR 0x08 /* LSB Period Register */ | |
| #define MCHP_PIT64B_MSB_PR 0x0C /* MSB Period Register */ | |
| #define MCHP_PIT64B_TLSBR 0x20 /* Timer LSB Register */ | |
| #define MCHP_PIT64B_TMSBR 0x24 /* Timer MSB Register */ | |
| struct mchp_pit64b_priv { | |
| void __iomem *base; | |
| }; | |
| static u64 mchp_pit64b_get_count(struct udevice *dev) | |
| { | |
| struct mchp_pit64b_priv *priv = dev_get_priv(dev); | |
| u32 lsb = readl(priv->base + MCHP_PIT64B_TLSBR); | |
| u32 msb = readl(priv->base + MCHP_PIT64B_TMSBR); | |
| return ((u64)msb << 32) | lsb; | |
| } | |
| static int mchp_pit64b_probe(struct udevice *dev) | |
| { | |
| struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); | |
| struct mchp_pit64b_priv *priv = dev_get_priv(dev); | |
| struct clk clk; | |
| ulong rate; | |
| int ret; | |
| priv->base = dev_read_addr_ptr(dev); | |
| if (IS_ERR(priv->base)) | |
| return PTR_ERR(priv->base); | |
| ret = clk_get_by_index(dev, 0, &clk); | |
| if (ret) | |
| return ret; | |
| ret = clk_enable(&clk); | |
| if (ret) | |
| return ret; | |
| rate = clk_get_rate(&clk); | |
| if (!rate) { | |
| clk_disable(&clk); | |
| return -ENOTSUPP; | |
| } | |
| /* Reset the timer in case it was used by previous bootloaders. */ | |
| writel(MCHP_PIT64B_CR_SWRST, priv->base + MCHP_PIT64B_CR); | |
| /* | |
| * Use highest prescaller (for a peripheral clock running at 200MHz | |
| * this will lead to the timer running at 12.5MHz) and continuous mode. | |
| */ | |
| writel((15 << 8) | MCHP_PIT64B_MR_CONT, priv->base + MCHP_PIT64B_MR); | |
| uc_priv->clock_rate = rate / 16; | |
| /* | |
| * Simulate free running counter by setting max values to period | |
| * registers. | |
| */ | |
| writel(~0UL, priv->base + MCHP_PIT64B_MSB_PR); | |
| writel(~0UL, priv->base + MCHP_PIT64B_LSB_PR); | |
| /* Start the timer. */ | |
| writel(MCHP_PIT64B_CR_START, priv->base + MCHP_PIT64B_CR); | |
| return 0; | |
| } | |
| static const struct timer_ops mchp_pit64b_ops = { | |
| .get_count = mchp_pit64b_get_count, | |
| }; | |
| static const struct udevice_id mchp_pit64b_ids[] = { | |
| { .compatible = "microchip,sam9x60-pit64b", }, | |
| { .compatible = "microchip,sama7g5-pit64b", }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(mchp_pit64b) = { | |
| .name = "mchp-pit64b", | |
| .id = UCLASS_TIMER, | |
| .of_match = mchp_pit64b_ids, | |
| .priv_auto = sizeof(struct mchp_pit64b_priv), | |
| .probe = mchp_pit64b_probe, | |
| .ops = &mchp_pit64b_ops, | |
| .flags = DM_FLAG_PRE_RELOC, | |
| }; |