| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef __LINUX_COMPILER_H | |
| #define __LINUX_COMPILER_H | |
| #include <linux/compiler_types.h> | |
| #ifndef __ASSEMBLY__ | |
| #ifdef __KERNEL__ | |
| /* | |
| * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code | |
| * to disable branch tracing on a per file basis. | |
| */ | |
| #if defined(CONFIG_TRACE_BRANCH_PROFILING) \ | |
| && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__) | |
| void ftrace_likely_update(struct ftrace_likely_data *f, int val, | |
| int expect, int is_constant); | |
| #define likely_notrace(x) __builtin_expect(!!(x), 1) | |
| #define unlikely_notrace(x) __builtin_expect(!!(x), 0) | |
| #define __branch_check__(x, expect, is_constant) ({ \ | |
| long ______r; \ | |
| static struct ftrace_likely_data \ | |
| __aligned(4) \ | |
| __section("_ftrace_annotated_branch") \ | |
| ______f = { \ | |
| .data.func = __func__, \ | |
| .data.file = __FILE__, \ | |
| .data.line = __LINE__, \ | |
| }; \ | |
| ______r = __builtin_expect(!!(x), expect); \ | |
| ftrace_likely_update(&______f, ______r, \ | |
| expect, is_constant); \ | |
| ______r; \ | |
| }) | |
| /* | |
| * Using __builtin_constant_p(x) to ignore cases where the return | |
| * value is always the same. This idea is taken from a similar patch | |
| * written by Daniel Walker. | |
| */ | |
| # ifndef likely | |
| # define likely(x) (__branch_check__(x, 1, __builtin_constant_p(x))) | |
| # endif | |
| # ifndef unlikely | |
| # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) | |
| # endif | |
| #ifdef CONFIG_PROFILE_ALL_BRANCHES | |
| /* | |
| * "Define 'is'", Bill Clinton | |
| * "Define 'if'", Steven Rostedt | |
| */ | |
| #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) ) | |
| #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond)) | |
| #define __trace_if_value(cond) ({ \ | |
| static struct ftrace_branch_data \ | |
| __aligned(4) \ | |
| __section("_ftrace_branch") \ | |
| __if_trace = { \ | |
| .func = __func__, \ | |
| .file = __FILE__, \ | |
| .line = __LINE__, \ | |
| }; \ | |
| (cond) ? \ | |
| (__if_trace.miss_hit[1]++,1) : \ | |
| (__if_trace.miss_hit[0]++,0); \ | |
| }) | |
| #endif /* CONFIG_PROFILE_ALL_BRANCHES */ | |
| #else | |
| # define likely(x) __builtin_expect(!!(x), 1) | |
| # define unlikely(x) __builtin_expect(!!(x), 0) | |
| #endif | |
| /* Optimization barrier */ | |
| #ifndef barrier | |
| # define barrier() __memory_barrier() | |
| #endif | |
| #ifndef barrier_data | |
| # define barrier_data(ptr) barrier() | |
| #endif | |
| /* workaround for GCC PR82365 if needed */ | |
| #ifndef barrier_before_unreachable | |
| # define barrier_before_unreachable() do { } while (0) | |
| #endif | |
| /* Unreachable code */ | |
| #ifdef CONFIG_STACK_VALIDATION | |
| /* | |
| * These macros help objtool understand GCC code flow for unreachable code. | |
| * The __COUNTER__ based labels are a hack to make each instance of the macros | |
| * unique, to convince GCC not to merge duplicate inline asm statements. | |
| */ | |
| #define annotate_reachable() ({ \ | |
| asm volatile("%c0:\n\t" \ | |
| ".pushsection .discard.reachable\n\t" \ | |
| ".long %c0b - .\n\t" \ | |
| ".popsection\n\t" : : "i" (__COUNTER__)); \ | |
| }) | |
| #define annotate_unreachable() ({ \ | |
| asm volatile("%c0:\n\t" \ | |
| ".pushsection .discard.unreachable\n\t" \ | |
| ".long %c0b - .\n\t" \ | |
| ".popsection\n\t" : : "i" (__COUNTER__)); \ | |
| }) | |
| #define ASM_UNREACHABLE \ | |
| "999:\n\t" \ | |
| ".pushsection .discard.unreachable\n\t" \ | |
| ".long 999b - .\n\t" \ | |
| ".popsection\n\t" | |
| /* Annotate a C jump table to allow objtool to follow the code flow */ | |
| #define __annotate_jump_table __section(".rodata..c_jump_table") | |
| #else | |
| #define annotate_reachable() | |
| #define annotate_unreachable() | |
| #define __annotate_jump_table | |
| #endif | |
| #ifndef ASM_UNREACHABLE | |
| # define ASM_UNREACHABLE | |
| #endif | |
| #ifndef unreachable | |
| # define unreachable() do { \ | |
| annotate_unreachable(); \ | |
| __builtin_unreachable(); \ | |
| } while (0) | |
| #endif | |
| /* | |
| * KENTRY - kernel entry point | |
| * This can be used to annotate symbols (functions or data) that are used | |
| * without their linker symbol being referenced explicitly. For example, | |
| * interrupt vector handlers, or functions in the kernel image that are found | |
| * programatically. | |
| * | |
| * Not required for symbols exported with EXPORT_SYMBOL, or initcalls. Those | |
| * are handled in their own way (with KEEP() in linker scripts). | |
| * | |
| * KENTRY can be avoided if the symbols in question are marked as KEEP() in the | |
| * linker script. For example an architecture could KEEP() its entire | |
| * boot/exception vector code rather than annotate each function and data. | |
| */ | |
| #ifndef KENTRY | |
| # define KENTRY(sym) \ | |
| extern typeof(sym) sym; \ | |
| static const unsigned long __kentry_##sym \ | |
| __used \ | |
| __section("___kentry" "+" #sym ) \ | |
| = (unsigned long)&sym; | |
| #endif | |
| #ifndef RELOC_HIDE | |
| # define RELOC_HIDE(ptr, off) \ | |
| ({ unsigned long __ptr; \ | |
| __ptr = (unsigned long) (ptr); \ | |
| (typeof(ptr)) (__ptr + (off)); }) | |
| #endif | |
| #ifndef OPTIMIZER_HIDE_VAR | |
| /* Make the optimizer believe the variable can be manipulated arbitrarily. */ | |
| #define OPTIMIZER_HIDE_VAR(var) \ | |
| __asm__ ("" : "=r" (var) : "0" (var)) | |
| #endif | |
| /* Not-quite-unique ID. */ | |
| #ifndef __UNIQUE_ID | |
| # define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__) | |
| #endif | |
| #include <linux/types.h> | |
| #define __READ_ONCE_SIZE \ | |
| ({ \ | |
| switch (size) { \ | |
| case 1: *(__u8 *)res = *(volatile __u8 *)p; break; \ | |
| case 2: *(__u16 *)res = *(volatile __u16 *)p; break; \ | |
| case 4: *(__u32 *)res = *(volatile __u32 *)p; break; \ | |
| case 8: *(__u64 *)res = *(volatile __u64 *)p; break; \ | |
| default: \ | |
| barrier(); \ | |
| __builtin_memcpy((void *)res, (const void *)p, size); \ | |
| barrier(); \ | |
| } \ | |
| }) | |
| static __always_inline | |
| void __read_once_size(const volatile void *p, void *res, int size) | |
| { | |
| __READ_ONCE_SIZE; | |
| } | |
| #ifdef CONFIG_KASAN | |
| /* | |
| * We can't declare function 'inline' because __no_sanitize_address confilcts | |
| * with inlining. Attempt to inline it may cause a build failure. | |
| * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 | |
| * '__maybe_unused' allows us to avoid defined-but-not-used warnings. | |
| */ | |
| # define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused | |
| #else | |
| # define __no_kasan_or_inline __always_inline | |
| #endif | |
| static __no_kasan_or_inline | |
| void __read_once_size_nocheck(const volatile void *p, void *res, int size) | |
| { | |
| __READ_ONCE_SIZE; | |
| } | |
| static __always_inline void __write_once_size(volatile void *p, void *res, int size) | |
| { | |
| switch (size) { | |
| case 1: *(volatile __u8 *)p = *(__u8 *)res; break; | |
| case 2: *(volatile __u16 *)p = *(__u16 *)res; break; | |
| case 4: *(volatile __u32 *)p = *(__u32 *)res; break; | |
| case 8: *(volatile __u64 *)p = *(__u64 *)res; break; | |
| default: | |
| barrier(); | |
| __builtin_memcpy((void *)p, (const void *)res, size); | |
| barrier(); | |
| } | |
| } | |
| /* | |
| * Prevent the compiler from merging or refetching reads or writes. The | |
| * compiler is also forbidden from reordering successive instances of | |
| * READ_ONCE and WRITE_ONCE, but only when the compiler is aware of some | |
| * particular ordering. One way to make the compiler aware of ordering is to | |
| * put the two invocations of READ_ONCE or WRITE_ONCE in different C | |
| * statements. | |
| * | |
| * These two macros will also work on aggregate data types like structs or | |
| * unions. If the size of the accessed data type exceeds the word size of | |
| * the machine (e.g., 32 bits or 64 bits) READ_ONCE() and WRITE_ONCE() will | |
| * fall back to memcpy(). There's at least two memcpy()s: one for the | |
| * __builtin_memcpy() and then one for the macro doing the copy of variable | |
| * - '__u' allocated on the stack. | |
| * | |
| * Their two major use cases are: (1) Mediating communication between | |
| * process-level code and irq/NMI handlers, all running on the same CPU, | |
| * and (2) Ensuring that the compiler does not fold, spindle, or otherwise | |
| * mutilate accesses that either do not require ordering or that interact | |
| * with an explicit memory barrier or atomic instruction that provides the | |
| * required ordering. | |
| */ | |
| #define __READ_ONCE(x, check) \ | |
| ({ \ | |
| union { typeof(x) __val; char __c[1]; } __u; \ | |
| if (check) \ | |
| __read_once_size(&(x), __u.__c, sizeof(x)); \ | |
| else \ | |
| __read_once_size_nocheck(&(x), __u.__c, sizeof(x)); \ | |
| __u.__val; \ | |
| }) | |
| #define READ_ONCE(x) __READ_ONCE(x, 1) | |
| /* | |
| * Use READ_ONCE_NOCHECK() instead of READ_ONCE() if you need | |
| * to hide memory access from KASAN. | |
| */ | |
| #define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0) | |
| static __no_kasan_or_inline | |
| unsigned long read_word_at_a_time(const void *addr) | |
| { | |
| return *(unsigned long *)addr; | |
| } | |
| #define WRITE_ONCE(x, val) \ | |
| ({ \ | |
| union { typeof(x) __val; char __c[1]; } __u = \ | |
| { .__val = (__force typeof(x)) (val) }; \ | |
| __write_once_size(&(x), __u.__c, sizeof(x)); \ | |
| __u.__val; \ | |
| }) | |
| #endif /* __KERNEL__ */ | |
| /* | |
| * Force the compiler to emit 'sym' as a symbol, so that we can reference | |
| * it from inline assembler. Necessary in case 'sym' could be inlined | |
| * otherwise, or eliminated entirely due to lack of references that are | |
| * visible to the compiler. | |
| */ | |
| #define __ADDRESSABLE(sym) \ | |
| static void * __section(".discard.addressable") __used \ | |
| __UNIQUE_ID(__PASTE(__addressable_,sym)) = (void *)&sym; | |
| /** | |
| * offset_to_ptr - convert a relative memory offset to an absolute pointer | |
| * @off: the address of the 32-bit offset value | |
| */ | |
| static inline void *offset_to_ptr(const int *off) | |
| { | |
| return (void *)((unsigned long)off + *off); | |
| } | |
| #endif /* __ASSEMBLY__ */ | |
| /* Compile time object size, -1 for unknown */ | |
| #ifndef __compiletime_object_size | |
| # define __compiletime_object_size(obj) -1 | |
| #endif | |
| #ifndef __compiletime_warning | |
| # define __compiletime_warning(message) | |
| #endif | |
| #ifndef __compiletime_error | |
| # define __compiletime_error(message) | |
| #endif | |
| #ifdef __OPTIMIZE__ | |
| # define __compiletime_assert(condition, msg, prefix, suffix) \ | |
| do { \ | |
| extern void prefix ## suffix(void) __compiletime_error(msg); \ | |
| if (!(condition)) \ | |
| prefix ## suffix(); \ | |
| } while (0) | |
| #else | |
| # define __compiletime_assert(condition, msg, prefix, suffix) do { } while (0) | |
| #endif | |
| #define _compiletime_assert(condition, msg, prefix, suffix) \ | |
| __compiletime_assert(condition, msg, prefix, suffix) | |
| /** | |
| * compiletime_assert - break build and emit msg if condition is false | |
| * @condition: a compile-time constant condition to check | |
| * @msg: a message to emit if condition is false | |
| * | |
| * In tradition of POSIX assert, this macro will break the build if the | |
| * supplied condition is *false*, emitting the supplied error message if the | |
| * compiler has support to do so. | |
| */ | |
| #define compiletime_assert(condition, msg) \ | |
| _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | |
| #define compiletime_assert_atomic_type(t) \ | |
| compiletime_assert(__native_word(t), \ | |
| "Need native word sized stores/loads for atomicity.") | |
| /* &a[0] degrades to a pointer: a different type from an array */ | |
| #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) | |
| #endif /* __LINUX_COMPILER_H */ |