| /* | |
| * (C) Copyright 2011 | |
| * eInfochips Ltd. <www.einfochips.com> | |
| * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> | |
| * | |
| * Based on Aspenite: | |
| * (C) Copyright 2010 | |
| * Marvell Semiconductor <www.marvell.com> | |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | |
| * Contributor: Mahavir Jain <mjain@marvell.com> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, | |
| * MA 02110-1301 USA | |
| */ | |
| #ifndef __CONFIG_GPLUGD_H | |
| #define __CONFIG_GPLUGD_H | |
| /* | |
| * FIXME: fix for error caused due to recent update to mach-types.h | |
| */ | |
| #include <asm/mach-types.h> | |
| #ifdef MACH_TYPE_SHEEVAD | |
| #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." | |
| #else | |
| #define MACH_TYPE_SHEEVAD 2625 | |
| #endif | |
| /* | |
| * Version number information | |
| */ | |
| #define CONFIG_IDENT_STRING "\nMarvell-gplugD" | |
| /* | |
| * High Level Configuration Options | |
| */ | |
| #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ | |
| #define CONFIG_ARMADA100 1 /* SOC Family Name */ | |
| #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ | |
| #define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ | |
| #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ | |
| #define CONFIG_SYS_TEXT_BASE 0x00f00000 | |
| /* | |
| * There is no internal RAM in ARMADA100, using DRAM | |
| * TBD: dcache to be used for this | |
| */ | |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) | |
| #define CONFIG_NR_DRAM_BANKS_MAX 2 | |
| /* | |
| * Commands configuration | |
| */ | |
| #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_CMD_I2C | |
| #undef CONFIG_CMD_FPGA | |
| #define CONFIG_CMD_USB | |
| #define CONFIG_CMD_EXT2 | |
| #define CONFIG_CMD_FAT | |
| /* Disable DCACHE */ | |
| #define CONFIG_SYS_DCACHE_OFF | |
| /* Network configuration */ | |
| #ifdef CONFIG_CMD_NET | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_ARMADA100_FEC | |
| /* DHCP Support */ | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 | |
| #endif /* CONFIG_CMD_NET */ | |
| /* GPIO Support */ | |
| #define CONFIG_MARVELL_GPIO | |
| /* PHY configuration */ | |
| #define CONFIG_MII | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_RESET_PHY_R | |
| /* 88E3015 register definition */ | |
| #define PHY_LED_PAR_SEL_REG 22 | |
| #define PHY_LED_MAN_REG 25 | |
| #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ | |
| /* GPIO Configuration for PHY */ | |
| #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ | |
| /* SPI Support */ | |
| #define CONFIG_ARMADA100_SPI | |
| #define CONFIG_ENV_SPI_CS 110 | |
| #define CONFIG_SYS_SSP_PORT 2 | |
| /* Flash Support */ | |
| #define CONFIG_CMD_SF | |
| #define CONFIG_SPI_FLASH_ATMEL | |
| /* | |
| * mv-common.h should be defined after CMD configs since it used them | |
| * to enable certain macros | |
| */ | |
| #include "mv-common.h" | |
| #undef CONFIG_ARCH_MISC_INIT | |
| #ifdef CONFIG_SYS_NS16550_COM1 | |
| #undef CONFIG_SYS_NS16550_COM1 | |
| #endif /* CONFIG_SYS_NS16550_COM1 */ | |
| #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE | |
| /* | |
| * Environment variables configurations | |
| */ | |
| #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| #define CONFIG_ENV_SECT_SIZE 0x4000 | |
| #define CONFIG_ENV_SIZE 0x4000 | |
| #define CONFIG_ENV_OFFSET 0x07C000 | |
| #define CONFIG_CMD_ASKENV | |
| #define CONFIG_CMD_EDITENV | |
| #define CONFIG_CMD_SAVEENV | |
| #ifdef CONFIG_CMD_USB | |
| #define CONFIG_USB_EHCI | |
| #define CONFIG_USB_EHCI_ARMADA100 | |
| #define CONFIG_EHCI_IS_TDI | |
| #define CONFIG_USB_STORAGE | |
| #endif /* CONFIG_CMD_USB */ | |
| #define CONFIG_DOS_PARTITION | |
| #define CONFIG_ISO_PARTITION | |
| #define CONFIG_SUPPORT_VFAT | |
| #endif /* __CONFIG_GPLUGD_H */ |