| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Pinctrl driver for Microchip PIC32 SoCs | |
| * Copyright (c) 2015 Microchip Technology Inc. | |
| * Written by Purna Chandra Mandal <purna.mandal@microchip.com> | |
| */ | |
| #include <dm.h> | |
| #include <errno.h> | |
| #include <log.h> | |
| #include <asm/global_data.h> | |
| #include <asm/io.h> | |
| #include <dm/pinctrl.h> | |
| #include <linux/bitops.h> | |
| #include <mach/pic32.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /* PIC32 has 10 peripheral ports with 16 pins each. | |
| * Ports are marked PORTA-PORTK or PORT0-PORT9. | |
| */ | |
| enum { | |
| PIC32_PORT_A = 0, | |
| PIC32_PORT_B = 1, | |
| PIC32_PORT_C = 2, | |
| PIC32_PORT_D = 3, | |
| PIC32_PORT_E = 4, | |
| PIC32_PORT_F = 5, | |
| PIC32_PORT_G = 6, | |
| PIC32_PORT_H = 7, | |
| PIC32_PORT_J = 8, /* no PORT_I */ | |
| PIC32_PORT_K = 9, | |
| PIC32_PINS_PER_PORT = 16, | |
| }; | |
| #define PIN_CONFIG_PIC32_DIGITAL (PIN_CONFIG_END + 1) | |
| #define PIN_CONFIG_PIC32_ANALOG (PIN_CONFIG_END + 2) | |
| /* pin configuration descriptor */ | |
| struct pic32_pin_config { | |
| u16 port; /* port number */ | |
| u16 pin; /* pin number in the port */ | |
| u32 config; /* one of PIN_CONFIG_* */ | |
| }; | |
| #define PIN_CONFIG(_prt, _pin, _cfg) \ | |
| {.port = (_prt), .pin = (_pin), .config = (_cfg), } | |
| /* In PIC32 muxing is performed at pin-level through two | |
| * different set of registers - one set for input functions, | |
| * and other for output functions. | |
| * Pin configuration is handled through port register. | |
| */ | |
| /* Port control registers */ | |
| struct pic32_reg_port { | |
| struct pic32_reg_atomic ansel; | |
| struct pic32_reg_atomic tris; | |
| struct pic32_reg_atomic port; | |
| struct pic32_reg_atomic lat; | |
| struct pic32_reg_atomic odc; | |
| struct pic32_reg_atomic cnpu; | |
| struct pic32_reg_atomic cnpd; | |
| struct pic32_reg_atomic cncon; | |
| struct pic32_reg_atomic unused[8]; | |
| }; | |
| /* Input function mux registers */ | |
| struct pic32_reg_in_mux { | |
| u32 unused0; | |
| u32 int1[4]; | |
| u32 unused1; | |
| u32 t2ck[8]; | |
| u32 ic1[9]; | |
| u32 unused2; | |
| u32 ocfar; | |
| u32 unused3; | |
| u32 u1rx; | |
| u32 u1cts; | |
| u32 u2rx; | |
| u32 u2cts; | |
| u32 u3rx; | |
| u32 u3cts; | |
| u32 u4rx; | |
| u32 u4cts; | |
| u32 u5rx; | |
| u32 u5cts; | |
| u32 u6rx; | |
| u32 u6cts; | |
| u32 unused4; | |
| u32 sdi1; | |
| u32 ss1; | |
| u32 unused5; | |
| u32 sdi2; | |
| u32 ss2; | |
| u32 unused6; | |
| u32 sdi3; | |
| u32 ss3; | |
| u32 unused7; | |
| u32 sdi4; | |
| u32 ss4; | |
| u32 unused8; | |
| u32 sdi5; | |
| u32 ss5; | |
| u32 unused9; | |
| u32 sdi6; | |
| u32 ss6; | |
| u32 c1rx; | |
| u32 c2rx; | |
| u32 refclki1; | |
| u32 refclki2; | |
| u32 refclki3; | |
| u32 refclki4; | |
| }; | |
| /* output mux register offset */ | |
| #define PPS_OUT(__port, __pin) \ | |
| (((__port) * PIC32_PINS_PER_PORT + (__pin)) << 2) | |
| struct pic32_pinctrl_priv { | |
| struct pic32_reg_in_mux *mux_in; /* mux input function */ | |
| struct pic32_reg_port *pinconf; /* pin configuration*/ | |
| void __iomem *mux_out; /* mux output function */ | |
| }; | |
| enum { | |
| PERIPH_ID_UART1, | |
| PERIPH_ID_UART2, | |
| PERIPH_ID_ETH, | |
| PERIPH_ID_USB, | |
| PERIPH_ID_SDHCI, | |
| PERIPH_ID_I2C1, | |
| PERIPH_ID_I2C2, | |
| PERIPH_ID_SPI1, | |
| PERIPH_ID_SPI2, | |
| PERIPH_ID_SQI, | |
| }; | |
| static int pic32_pinconfig_one(struct pic32_pinctrl_priv *priv, | |
| u32 port_nr, u32 pin, u32 param) | |
| { | |
| struct pic32_reg_port *port; | |
| port = &priv->pinconf[port_nr]; | |
| switch (param) { | |
| case PIN_CONFIG_PIC32_DIGITAL: | |
| writel(BIT(pin), &port->ansel.clr); | |
| break; | |
| case PIN_CONFIG_PIC32_ANALOG: | |
| writel(BIT(pin), &port->ansel.set); | |
| break; | |
| case PIN_CONFIG_INPUT_ENABLE: | |
| writel(BIT(pin), &port->tris.set); | |
| break; | |
| case PIN_CONFIG_OUTPUT: | |
| writel(BIT(pin), &port->tris.clr); | |
| break; | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| writel(BIT(pin), &port->cnpu.set); | |
| break; | |
| case PIN_CONFIG_BIAS_PULL_DOWN: | |
| writel(BIT(pin), &port->cnpd.set); | |
| break; | |
| case PIN_CONFIG_DRIVE_OPEN_DRAIN: | |
| writel(BIT(pin), &port->odc.set); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int pic32_pinconfig_set(struct pic32_pinctrl_priv *priv, | |
| const struct pic32_pin_config *list, int count) | |
| { | |
| int i; | |
| for (i = 0 ; i < count; i++) | |
| pic32_pinconfig_one(priv, list[i].port, | |
| list[i].pin, list[i].config); | |
| return 0; | |
| } | |
| static void pic32_eth_pin_config(struct udevice *dev) | |
| { | |
| struct pic32_pinctrl_priv *priv = dev_get_priv(dev); | |
| const struct pic32_pin_config configs[] = { | |
| /* EMDC - D11 */ | |
| PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_OUTPUT), | |
| /* ETXEN */ | |
| PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_OUTPUT), | |
| /* ECRSDV */ | |
| PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_INPUT_ENABLE), | |
| /* ERXD0 */ | |
| PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_INPUT_ENABLE), | |
| PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_BIAS_PULL_DOWN), | |
| /* ERXD1 */ | |
| PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_INPUT_ENABLE), | |
| PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_BIAS_PULL_DOWN), | |
| /* EREFCLK */ | |
| PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_INPUT_ENABLE), | |
| /* ETXD1 */ | |
| PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_OUTPUT), | |
| /* ETXD0 */ | |
| PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_OUTPUT), | |
| /* EMDIO */ | |
| PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_INPUT_ENABLE), | |
| /* ERXERR */ | |
| PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_PIC32_DIGITAL), | |
| PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_INPUT_ENABLE), | |
| }; | |
| pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs)); | |
| } | |
| static void pic32_sdhci_pin_config(struct udevice *dev) | |
| { | |
| struct pic32_pinctrl_priv *priv = dev_get_priv(dev); | |
| const struct pic32_pin_config configs[] = { | |
| /* SDWP - H2 */ | |
| PIN_CONFIG(PIC32_PORT_H, 2, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDCD - A0 */ | |
| PIN_CONFIG(PIC32_PORT_A, 0, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDCMD - D4 */ | |
| PIN_CONFIG(PIC32_PORT_D, 4, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDCK - A6 */ | |
| PIN_CONFIG(PIC32_PORT_A, 6, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDDATA0 - G13 */ | |
| PIN_CONFIG(PIC32_PORT_G, 13, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDDATA1 - G12 */ | |
| PIN_CONFIG(PIC32_PORT_G, 12, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDDATA2 - G14 */ | |
| PIN_CONFIG(PIC32_PORT_G, 14, PIN_CONFIG_PIC32_DIGITAL), | |
| /* SDDATA3 - A7 */ | |
| PIN_CONFIG(PIC32_PORT_A, 7, PIN_CONFIG_PIC32_DIGITAL), | |
| }; | |
| pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs)); | |
| } | |
| static int pic32_pinctrl_request(struct udevice *dev, int func, int flags) | |
| { | |
| struct pic32_pinctrl_priv *priv = dev_get_priv(dev); | |
| switch (func) { | |
| case PERIPH_ID_UART2: | |
| /* PPS for U2 RX/TX */ | |
| writel(0x02, priv->mux_out + PPS_OUT(PIC32_PORT_G, 9)); | |
| writel(0x05, &priv->mux_in->u2rx); /* B0 */ | |
| /* set digital mode */ | |
| pic32_pinconfig_one(priv, PIC32_PORT_G, 9, | |
| PIN_CONFIG_PIC32_DIGITAL); | |
| pic32_pinconfig_one(priv, PIC32_PORT_B, 0, | |
| PIN_CONFIG_PIC32_DIGITAL); | |
| break; | |
| case PERIPH_ID_ETH: | |
| pic32_eth_pin_config(dev); | |
| break; | |
| case PERIPH_ID_SDHCI: | |
| pic32_sdhci_pin_config(dev); | |
| break; | |
| default: | |
| debug("%s: unknown-unhandled case\n", __func__); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int pic32_pinctrl_get_periph_id(struct udevice *dev, | |
| struct udevice *periph) | |
| { | |
| int ret; | |
| u32 cell[2]; | |
| ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(periph), | |
| "interrupts", cell, ARRAY_SIZE(cell)); | |
| if (ret < 0) | |
| return -EINVAL; | |
| /* interrupt number */ | |
| switch (cell[0]) { | |
| case 112 ... 114: | |
| return PERIPH_ID_UART1; | |
| case 145 ... 147: | |
| return PERIPH_ID_UART2; | |
| case 109 ... 111: | |
| return PERIPH_ID_SPI1; | |
| case 142 ... 144: | |
| return PERIPH_ID_SPI2; | |
| case 115 ... 117: | |
| return PERIPH_ID_I2C1; | |
| case 148 ... 150: | |
| return PERIPH_ID_I2C2; | |
| case 132 ... 133: | |
| return PERIPH_ID_USB; | |
| case 169: | |
| return PERIPH_ID_SQI; | |
| case 191: | |
| return PERIPH_ID_SDHCI; | |
| case 153: | |
| return PERIPH_ID_ETH; | |
| default: | |
| break; | |
| } | |
| return -ENOENT; | |
| } | |
| static int pic32_pinctrl_set_state_simple(struct udevice *dev, | |
| struct udevice *periph) | |
| { | |
| int func; | |
| debug("%s: periph %s\n", __func__, periph->name); | |
| func = pic32_pinctrl_get_periph_id(dev, periph); | |
| if (func < 0) | |
| return func; | |
| return pic32_pinctrl_request(dev, func, 0); | |
| } | |
| static struct pinctrl_ops pic32_pinctrl_ops = { | |
| .set_state_simple = pic32_pinctrl_set_state_simple, | |
| .request = pic32_pinctrl_request, | |
| .get_periph_id = pic32_pinctrl_get_periph_id, | |
| }; | |
| static int pic32_pinctrl_probe(struct udevice *dev) | |
| { | |
| struct pic32_pinctrl_priv *priv = dev_get_priv(dev); | |
| struct fdt_resource res; | |
| void *fdt = (void *)gd->fdt_blob; | |
| int node = dev_of_offset(dev); | |
| int ret; | |
| ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", | |
| "ppsin", &res); | |
| if (ret < 0) { | |
| printf("pinctrl: resource \"ppsin\" not found\n"); | |
| return ret; | |
| } | |
| priv->mux_in = ioremap(res.start, fdt_resource_size(&res)); | |
| ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", | |
| "ppsout", &res); | |
| if (ret < 0) { | |
| printf("pinctrl: resource \"ppsout\" not found\n"); | |
| return ret; | |
| } | |
| priv->mux_out = ioremap(res.start, fdt_resource_size(&res)); | |
| ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", | |
| "port", &res); | |
| if (ret < 0) { | |
| printf("pinctrl: resource \"port\" not found\n"); | |
| return ret; | |
| } | |
| priv->pinconf = ioremap(res.start, fdt_resource_size(&res)); | |
| return 0; | |
| } | |
| static const struct udevice_id pic32_pinctrl_ids[] = { | |
| { .compatible = "microchip,pic32mzda-pinctrl" }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(pinctrl_pic32) = { | |
| .name = "pinctrl_pic32", | |
| .id = UCLASS_PINCTRL, | |
| .of_match = pic32_pinctrl_ids, | |
| .ops = &pic32_pinctrl_ops, | |
| .probe = pic32_pinctrl_probe, | |
| .bind = dm_scan_fdt_dev, | |
| .priv_auto = sizeof(struct pic32_pinctrl_priv), | |
| }; |