| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2022 Svyatoslav Ryhel <clamor95@gmail.com> | |
| */ | |
| #include <dm.h> | |
| #include <dm/lists.h> | |
| #include <errno.h> | |
| #include <timer.h> | |
| #include <asm/io.h> | |
| #include <asm/arch/clock.h> | |
| #include <asm/arch/tegra.h> | |
| #define TEGRA_OSC_CLK_ENB_L_SET (NV_PA_CLK_RST_BASE + 0x320) | |
| #define TEGRA_OSC_SET_CLK_ENB_TMR BIT(5) | |
| #define TEGRA_TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0) | |
| #define TEGRA_TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4) | |
| #define TEGRA_TIMER_RATE 1000000 /* 1 MHz */ | |
| /* | |
| * On pre-DM stage timer should be left configured by | |
| * previous bootloader for correct 1MHz clock. | |
| * In the case of reset default value is set to 1/13 of | |
| * CLK_M which should be decent enough to safely | |
| * get to DM stage. | |
| */ | |
| u64 notrace timer_early_get_count(void) | |
| { | |
| /* At this stage raw timer is used */ | |
| return readl(TEGRA_TIMER_USEC_CNTR); | |
| } | |
| unsigned long notrace timer_early_get_rate(void) | |
| { | |
| return TEGRA_TIMER_RATE; | |
| } | |
| ulong timer_get_boot_us(void) | |
| { | |
| return timer_early_get_count(); | |
| } | |
| /* | |
| * At moment of calling get_count, timer driver is already | |
| * probed and is configured to have precise 1MHz clock. | |
| * Tegra timer has a step of 1 microsecond which removes | |
| * need of using adjusments involving uc_priv->clock_rate. | |
| */ | |
| static notrace u64 tegra_timer_get_count(struct udevice *dev) | |
| { | |
| u32 val = timer_early_get_count(); | |
| return timer_conv_64(val); | |
| } | |
| static int tegra_timer_probe(struct udevice *dev) | |
| { | |
| struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); | |
| u32 usec_config, value; | |
| /* Timer rate has to be set unconditionally */ | |
| uc_priv->clock_rate = TEGRA_TIMER_RATE; | |
| /* | |
| * Configure microsecond timers to have 1MHz clock | |
| * Config register is 0xqqww, where qq is "dividend", ww is "divisor" | |
| * Uses n+1 scheme | |
| */ | |
| switch (clock_get_rate(CLOCK_ID_CLK_M)) { | |
| case 12000000: | |
| usec_config = 0x000b; /* (11+1)/(0+1) */ | |
| break; | |
| case 12800000: | |
| usec_config = 0x043f; /* (63+1)/(4+1) */ | |
| break; | |
| case 13000000: | |
| usec_config = 0x000c; /* (12+1)/(0+1) */ | |
| break; | |
| case 16800000: | |
| usec_config = 0x0453; /* (83+1)/(4+1) */ | |
| break; | |
| case 19200000: | |
| usec_config = 0x045f; /* (95+1)/(4+1) */ | |
| break; | |
| case 26000000: | |
| usec_config = 0x0019; /* (25+1)/(0+1) */ | |
| break; | |
| case 38400000: | |
| usec_config = 0x04bf; /* (191+1)/(4+1) */ | |
| break; | |
| case 48000000: | |
| usec_config = 0x002f; /* (47+1)/(0+1) */ | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* Enable clock to timer hardware */ | |
| value = readl_relaxed(TEGRA_OSC_CLK_ENB_L_SET); | |
| writel_relaxed(value | TEGRA_OSC_SET_CLK_ENB_TMR, | |
| TEGRA_OSC_CLK_ENB_L_SET); | |
| writel_relaxed(usec_config, TEGRA_TIMER_USEC_CFG); | |
| return 0; | |
| } | |
| static int tegra_timer_bind(struct udevice *dev) | |
| { | |
| if (CONFIG_IS_ENABLED(WDT_TEGRA)) | |
| return device_bind_driver_to_node(dev, "tegra_wdt", "tegra-wdt", | |
| dev_ofnode(dev), NULL); | |
| return 0; | |
| } | |
| static const struct timer_ops tegra_timer_ops = { | |
| .get_count = tegra_timer_get_count, | |
| }; | |
| static const struct udevice_id tegra_timer_ids[] = { | |
| { .compatible = "nvidia,tegra20-timer" }, | |
| { .compatible = "nvidia,tegra30-timer" }, | |
| { .compatible = "nvidia,tegra114-timer" }, | |
| { .compatible = "nvidia,tegra124-timer" }, | |
| { .compatible = "nvidia,tegra210-timer" }, | |
| { } | |
| }; | |
| U_BOOT_DRIVER(tegra_timer) = { | |
| .name = "tegra_timer", | |
| .id = UCLASS_TIMER, | |
| .of_match = tegra_timer_ids, | |
| .bind = tegra_timer_bind, | |
| .probe = tegra_timer_probe, | |
| .ops = &tegra_timer_ops, | |
| .flags = DM_FLAG_PRE_RELOC, | |
| }; |