| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2011 | |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de. | |
| */ | |
| #include "imagetool.h" | |
| #include "aisimage.h" | |
| #include <image.h> | |
| #define IS_FNC_EXEC(c) (cmd_table[c].AIS_cmd == AIS_CMD_FNLOAD) | |
| #define WORD_ALIGN0 4 | |
| #define MAX_CMD_BUFFER 4096 | |
| static uint32_t ais_img_size; | |
| /* | |
| * Supported commands for configuration file | |
| */ | |
| static table_entry_t aisimage_cmds[] = { | |
| {CMD_DATA, "DATA", "Reg Write Data"}, | |
| {CMD_FILL, "FILL", "Fill range with pattern"}, | |
| {CMD_CRCON, "CRCON", "CRC Enable"}, | |
| {CMD_CRCOFF, "CRCOFF", "CRC Disable"}, | |
| {CMD_CRCCHECK, "CRCCHECK", "CRC Validate"}, | |
| {CMD_JMPCLOSE, "JMPCLOSE", "Jump & Close"}, | |
| {CMD_JMP, "JMP", "Jump"}, | |
| {CMD_SEQREAD, "SEQREAD", "Sequential read"}, | |
| {CMD_PLL0, "PLL0", "PLL0"}, | |
| {CMD_PLL1, "PLL1", "PLL1"}, | |
| {CMD_CLK, "CLK", "Clock configuration"}, | |
| {CMD_DDR2, "DDR2", "DDR2 Configuration"}, | |
| {CMD_EMIFA, "EMIFA", "EMIFA"}, | |
| {CMD_EMIFA_ASYNC, "EMIFA_ASYNC", "EMIFA Async"}, | |
| {CMD_PLL, "PLL", "PLL & Clock configuration"}, | |
| {CMD_PSC, "PSC", "PSC setup"}, | |
| {CMD_PINMUX, "PINMUX", "Pinmux setup"}, | |
| {CMD_BOOTTABLE, "BOOT_TABLE", "Boot table command"}, | |
| {-1, "", ""}, | |
| }; | |
| static struct ais_func_exec { | |
| uint32_t index; | |
| uint32_t argcnt; | |
| } ais_func_table[] = { | |
| [CMD_PLL0] = {0, 2}, | |
| [CMD_PLL1] = {1, 2}, | |
| [CMD_CLK] = {2, 1}, | |
| [CMD_DDR2] = {3, 8}, | |
| [CMD_EMIFA] = {4, 5}, | |
| [CMD_EMIFA_ASYNC] = {5, 5}, | |
| [CMD_PLL] = {6, 3}, | |
| [CMD_PSC] = {7, 1}, | |
| [CMD_PINMUX] = {8, 3} | |
| }; | |
| static struct cmd_table_t { | |
| uint32_t nargs; | |
| uint32_t AIS_cmd; | |
| } cmd_table[] = { | |
| [CMD_FILL] = { 4, AIS_CMD_FILL}, | |
| [CMD_CRCON] = { 0, AIS_CMD_ENCRC}, | |
| [CMD_CRCOFF] = { 0, AIS_CMD_DISCRC}, | |
| [CMD_CRCCHECK] = { 2, AIS_CMD_ENCRC}, | |
| [CMD_JMPCLOSE] = { 1, AIS_CMD_JMPCLOSE}, | |
| [CMD_JMP] = { 1, AIS_CMD_JMP}, | |
| [CMD_SEQREAD] = { 0, AIS_CMD_SEQREAD}, | |
| [CMD_PLL0] = { 2, AIS_CMD_FNLOAD}, | |
| [CMD_PLL1] = { 2, AIS_CMD_FNLOAD}, | |
| [CMD_CLK] = { 1, AIS_CMD_FNLOAD}, | |
| [CMD_DDR2] = { 8, AIS_CMD_FNLOAD}, | |
| [CMD_EMIFA] = { 5, AIS_CMD_FNLOAD}, | |
| [CMD_EMIFA_ASYNC] = { 5, AIS_CMD_FNLOAD}, | |
| [CMD_PLL] = { 3, AIS_CMD_FNLOAD}, | |
| [CMD_PSC] = { 1, AIS_CMD_FNLOAD}, | |
| [CMD_PINMUX] = { 3, AIS_CMD_FNLOAD}, | |
| [CMD_BOOTTABLE] = { 4, AIS_CMD_BOOTTBL}, | |
| }; | |
| static uint32_t get_cfg_value(char *token, char *name, int linenr) | |
| { | |
| char *endptr; | |
| uint32_t value; | |
| errno = 0; | |
| value = strtoul(token, &endptr, 16); | |
| if (errno || (token == endptr)) { | |
| fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", | |
| name, linenr, token); | |
| exit(EXIT_FAILURE); | |
| } | |
| return value; | |
| } | |
| static int get_ais_table_id(uint32_t *ptr) | |
| { | |
| int i; | |
| int func_no; | |
| for (i = 0; i < ARRAY_SIZE(cmd_table); i++) { | |
| if (*ptr == cmd_table[i].AIS_cmd) { | |
| if (cmd_table[i].AIS_cmd != AIS_CMD_FNLOAD) | |
| return i; | |
| func_no = ((struct ais_cmd_func *)ptr)->func_args | |
| & 0xFFFF; | |
| if (func_no == ais_func_table[i].index) | |
| return i; | |
| } | |
| } | |
| return -1; | |
| } | |
| static void aisimage_print_header(const void *hdr, struct image_tool_params *params) | |
| { | |
| struct ais_header *ais_hdr = (struct ais_header *)hdr; | |
| uint32_t *ptr; | |
| struct ais_cmd_load *ais_load; | |
| int id; | |
| if (ais_hdr->magic != AIS_MAGIC_WORD) { | |
| fprintf(stderr, "Error: - AIS Magic Number not found\n"); | |
| return; | |
| } | |
| fprintf(stdout, "Image Type: TI Davinci AIS Boot Image\n"); | |
| fprintf(stdout, "AIS magic : %08x\n", ais_hdr->magic); | |
| ptr = (uint32_t *)&ais_hdr->magic; | |
| ptr++; | |
| while (*ptr != AIS_CMD_JMPCLOSE) { | |
| /* Check if we find the image */ | |
| if (*ptr == AIS_CMD_LOAD) { | |
| ais_load = (struct ais_cmd_load *)ptr; | |
| fprintf(stdout, "Image at : 0x%08x size 0x%08x\n", | |
| ais_load->addr, | |
| ais_load->size); | |
| ptr = ais_load->data + ais_load->size / sizeof(*ptr); | |
| continue; | |
| } | |
| id = get_ais_table_id(ptr); | |
| if (id < 0) { | |
| fprintf(stderr, "Error: - AIS Image corrupted\n"); | |
| return; | |
| } | |
| fprintf(stdout, "AIS cmd : %s\n", | |
| get_table_entry_name(aisimage_cmds, NULL, id)); | |
| ptr += cmd_table[id].nargs + IS_FNC_EXEC(id) + 1; | |
| if (((void *)ptr - hdr) > ais_img_size) { | |
| fprintf(stderr, | |
| "AIS Image not terminated by JMPCLOSE\n"); | |
| return; | |
| } | |
| } | |
| } | |
| static uint32_t *ais_insert_cmd_header(uint32_t cmd, uint32_t nargs, | |
| uint32_t *parms, struct image_type_params *tparams, | |
| uint32_t *ptr) | |
| { | |
| int i; | |
| *ptr++ = cmd_table[cmd].AIS_cmd; | |
| if (IS_FNC_EXEC(cmd)) | |
| *ptr++ = ((nargs & 0xFFFF) << 16) + ais_func_table[cmd].index; | |
| /* Copy parameters */ | |
| for (i = 0; i < nargs; i++) | |
| *ptr++ = cpu_to_le32(parms[i]); | |
| return ptr; | |
| } | |
| static uint32_t *ais_alloc_buffer(struct image_tool_params *params) | |
| { | |
| int dfd; | |
| struct stat sbuf; | |
| char *datafile = params->datafile; | |
| uint32_t *ptr; | |
| dfd = open(datafile, O_RDONLY|O_BINARY); | |
| if (dfd < 0) { | |
| fprintf(stderr, "%s: Can't open %s: %s\n", | |
| params->cmdname, datafile, strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| if (fstat(dfd, &sbuf) < 0) { | |
| fprintf(stderr, "%s: Can't stat %s: %s\n", | |
| params->cmdname, datafile, strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| /* | |
| * Place for header is allocated. The size is taken from | |
| * the size of the datafile, that the ais_image_generate() | |
| * will copy into the header. Copying the datafile | |
| * is not left to the main program, because after the datafile | |
| * the header must be terminated with the Jump & Close command. | |
| */ | |
| ais_img_size = ALIGN(sbuf.st_size, WORD_ALIGN0) + MAX_CMD_BUFFER; | |
| ptr = (uint32_t *)malloc(ALIGN(sbuf.st_size, WORD_ALIGN0) | |
| + MAX_CMD_BUFFER); | |
| if (!ptr) { | |
| fprintf(stderr, "%s: malloc return failure: %s\n", | |
| params->cmdname, strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| close(dfd); | |
| return ptr; | |
| } | |
| static uint32_t *ais_copy_image(struct image_tool_params *params, | |
| uint32_t *aisptr) | |
| { | |
| int dfd; | |
| struct stat sbuf; | |
| char *datafile = params->datafile; | |
| void *ptr; | |
| dfd = open(datafile, O_RDONLY|O_BINARY); | |
| if (dfd < 0) { | |
| fprintf(stderr, "%s: Can't open %s: %s\n", | |
| params->cmdname, datafile, strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| if (fstat(dfd, &sbuf) < 0) { | |
| fprintf(stderr, "%s: Can't stat %s: %s\n", | |
| params->cmdname, datafile, strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0); | |
| *aisptr++ = AIS_CMD_LOAD; | |
| *aisptr++ = params->ep; | |
| *aisptr++ = sbuf.st_size; | |
| memcpy((void *)aisptr, ptr, sbuf.st_size); | |
| aisptr += ALIGN(sbuf.st_size, WORD_ALIGN0) / sizeof(uint32_t); | |
| (void) munmap((void *)ptr, sbuf.st_size); | |
| (void) close(dfd); | |
| return aisptr; | |
| } | |
| static int aisimage_generate(struct image_tool_params *params, | |
| struct image_type_params *tparams) | |
| { | |
| FILE *fd = NULL; | |
| char *line = NULL; | |
| char *token, *saveptr1, *saveptr2; | |
| int lineno = 0; | |
| int fld; | |
| size_t len; | |
| int32_t cmd; | |
| uint32_t nargs, cmd_parms[10]; | |
| uint32_t value, size; | |
| char *name = params->imagename; | |
| uint32_t *aishdr; | |
| fd = fopen(name, "r"); | |
| if (fd == 0) { | |
| fprintf(stderr, | |
| "Error: %s - Can't open AIS configuration\n", name); | |
| exit(EXIT_FAILURE); | |
| } | |
| /* | |
| * the size of the header is variable and is computed | |
| * scanning the configuration file. | |
| */ | |
| tparams->header_size = 0; | |
| /* | |
| * Start allocating a buffer suitable for most command | |
| * The buffer is then reallocated if it is too small | |
| */ | |
| aishdr = ais_alloc_buffer(params); | |
| tparams->hdr = aishdr; | |
| *aishdr++ = AIS_MAGIC_WORD; | |
| /* Very simple parsing, line starting with # are comments | |
| * and are dropped | |
| */ | |
| while ((getline(&line, &len, fd)) > 0) { | |
| lineno++; | |
| token = strtok_r(line, "\r\n", &saveptr1); | |
| if (token == NULL) | |
| continue; | |
| /* Check inside the single line */ | |
| line = token; | |
| fld = CFG_COMMAND; | |
| cmd = CMD_INVALID; | |
| nargs = 0; | |
| while (token != NULL) { | |
| token = strtok_r(line, " \t", &saveptr2); | |
| if (token == NULL) | |
| break; | |
| /* Drop all text starting with '#' as comments */ | |
| if (token[0] == '#') | |
| break; | |
| switch (fld) { | |
| case CFG_COMMAND: | |
| cmd = get_table_entry_id(aisimage_cmds, | |
| "aisimage commands", token); | |
| if (cmd < 0) { | |
| fprintf(stderr, | |
| "Error: %s[%d] - Invalid command" | |
| "(%s)\n", name, lineno, token); | |
| exit(EXIT_FAILURE); | |
| } | |
| break; | |
| case CFG_VALUE: | |
| value = get_cfg_value(token, name, lineno); | |
| cmd_parms[nargs++] = value; | |
| if (nargs > cmd_table[cmd].nargs) { | |
| fprintf(stderr, | |
| "Error: %s[%d] - too much arguments:" | |
| "(%s) for command %s\n", name, | |
| lineno, token, | |
| aisimage_cmds[cmd].sname); | |
| exit(EXIT_FAILURE); | |
| } | |
| break; | |
| } | |
| line = NULL; | |
| fld = CFG_VALUE; | |
| } | |
| if (cmd != CMD_INVALID) { | |
| /* Now insert the command into the header */ | |
| aishdr = ais_insert_cmd_header(cmd, nargs, cmd_parms, | |
| tparams, aishdr); | |
| } | |
| } | |
| fclose(fd); | |
| aishdr = ais_copy_image(params, aishdr); | |
| /* Add Jmp & Close */ | |
| *aishdr++ = AIS_CMD_JMPCLOSE; | |
| *aishdr++ = params->ep; | |
| size = (aishdr - (uint32_t *)tparams->hdr) * sizeof(uint32_t); | |
| tparams->header_size = size; | |
| return 0; | |
| } | |
| static int aisimage_check_image_types(uint8_t type) | |
| { | |
| if (type == IH_TYPE_AISIMAGE) | |
| return EXIT_SUCCESS; | |
| else | |
| return EXIT_FAILURE; | |
| } | |
| static int aisimage_verify_header(unsigned char *ptr, int image_size, | |
| struct image_tool_params *params) | |
| { | |
| struct ais_header *ais_hdr = (struct ais_header *)ptr; | |
| if (ais_hdr->magic != AIS_MAGIC_WORD) | |
| return -FDT_ERR_BADSTRUCTURE; | |
| /* Store the total size to remember in print_hdr */ | |
| ais_img_size = image_size; | |
| return 0; | |
| } | |
| static void aisimage_set_header(void *ptr, struct stat *sbuf, int ifd, | |
| struct image_tool_params *params) | |
| { | |
| } | |
| static int aisimage_check_params(struct image_tool_params *params) | |
| { | |
| if (!params) | |
| return CFG_INVALID; | |
| if (!strlen(params->imagename)) { | |
| fprintf(stderr, "Error: %s - Configuration file not specified, " | |
| "it is needed for aisimage generation\n", | |
| params->cmdname); | |
| return CFG_INVALID; | |
| } | |
| /* | |
| * Check parameters: | |
| * XIP is not allowed and verify that incompatible | |
| * parameters are not sent at the same time | |
| * For example, if list is required a data image must not be provided | |
| */ | |
| return (params->dflag && (params->fflag || params->lflag)) || | |
| (params->fflag && (params->dflag || params->lflag)) || | |
| (params->lflag && (params->dflag || params->fflag)) || | |
| (params->xflag) || !(strlen(params->imagename)); | |
| } | |
| /* | |
| * aisimage parameters | |
| */ | |
| U_BOOT_IMAGE_TYPE( | |
| aisimage, | |
| "TI Davinci AIS Boot Image support", | |
| 0, | |
| NULL, | |
| aisimage_check_params, | |
| aisimage_verify_header, | |
| aisimage_print_header, | |
| aisimage_set_header, | |
| NULL, | |
| aisimage_check_image_types, | |
| NULL, | |
| aisimage_generate | |
| ); |