| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> | |
| */ | |
| #include <common.h> | |
| #include <dm.h> | |
| #include <dm/device_compat.h> | |
| #include <linux/compat.h> | |
| #include <dm/pinctrl.h> | |
| /** | |
| * pinctrl_pin_name_to_selector() - return the pin selector for a pin | |
| * | |
| * @dev: pin controller device | |
| * @pin: the pin name to look up | |
| * @return: pin selector, or negative error code on failure | |
| */ | |
| static int pinctrl_pin_name_to_selector(struct udevice *dev, const char *pin) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| unsigned npins, selector; | |
| if (!ops->get_pins_count || !ops->get_pin_name) { | |
| dev_dbg(dev, "get_pins_count or get_pin_name missing\n"); | |
| return -ENOSYS; | |
| } | |
| npins = ops->get_pins_count(dev); | |
| /* See if this pctldev has this pin */ | |
| for (selector = 0; selector < npins; selector++) { | |
| const char *pname = ops->get_pin_name(dev, selector); | |
| if (!strcmp(pin, pname)) | |
| return selector; | |
| } | |
| return -ENOSYS; | |
| } | |
| /** | |
| * pinctrl_group_name_to_selector() - return the group selector for a group | |
| * | |
| * @dev: pin controller device | |
| * @group: the pin group name to look up | |
| * @return: pin group selector, or negative error code on failure | |
| */ | |
| static int pinctrl_group_name_to_selector(struct udevice *dev, | |
| const char *group) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| unsigned ngroups, selector; | |
| if (!ops->get_groups_count || !ops->get_group_name) { | |
| dev_dbg(dev, "get_groups_count or get_group_name missing\n"); | |
| return -ENOSYS; | |
| } | |
| ngroups = ops->get_groups_count(dev); | |
| /* See if this pctldev has this group */ | |
| for (selector = 0; selector < ngroups; selector++) { | |
| const char *gname = ops->get_group_name(dev, selector); | |
| if (!strcmp(group, gname)) | |
| return selector; | |
| } | |
| return -ENOSYS; | |
| } | |
| #if CONFIG_IS_ENABLED(PINMUX) | |
| /** | |
| * pinmux_func_name_to_selector() - return the function selector for a function | |
| * | |
| * @dev: pin controller device | |
| * @function: the function name to look up | |
| * @return: function selector, or negative error code on failure | |
| */ | |
| static int pinmux_func_name_to_selector(struct udevice *dev, | |
| const char *function) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| unsigned nfuncs, selector = 0; | |
| if (!ops->get_functions_count || !ops->get_function_name) { | |
| dev_dbg(dev, | |
| "get_functions_count or get_function_name missing\n"); | |
| return -ENOSYS; | |
| } | |
| nfuncs = ops->get_functions_count(dev); | |
| /* See if this pctldev has this function */ | |
| for (selector = 0; selector < nfuncs; selector++) { | |
| const char *fname = ops->get_function_name(dev, selector); | |
| if (!strcmp(function, fname)) | |
| return selector; | |
| } | |
| return -ENOSYS; | |
| } | |
| /** | |
| * pinmux_enable_setting() - enable pin-mux setting for a certain pin/group | |
| * | |
| * @dev: pin controller device | |
| * @is_group: target of operation (true: pin group, false: pin) | |
| * @selector: pin selector or group selector, depending on @is_group | |
| * @func_selector: function selector | |
| * @return: 0 on success, or negative error code on failure | |
| */ | |
| static int pinmux_enable_setting(struct udevice *dev, bool is_group, | |
| unsigned selector, unsigned func_selector) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| if (is_group) { | |
| if (!ops->pinmux_group_set) { | |
| dev_dbg(dev, "pinmux_group_set op missing\n"); | |
| return -ENOSYS; | |
| } | |
| return ops->pinmux_group_set(dev, selector, func_selector); | |
| } else { | |
| if (!ops->pinmux_set) { | |
| dev_dbg(dev, "pinmux_set op missing\n"); | |
| return -ENOSYS; | |
| } | |
| return ops->pinmux_set(dev, selector, func_selector); | |
| } | |
| } | |
| #else | |
| static int pinmux_func_name_to_selector(struct udevice *dev, | |
| const char *function) | |
| { | |
| return 0; | |
| } | |
| static int pinmux_enable_setting(struct udevice *dev, bool is_group, | |
| unsigned selector, unsigned func_selector) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| #if CONFIG_IS_ENABLED(PINCONF) | |
| /** | |
| * pinconf_prop_name_to_param() - return parameter ID for a property name | |
| * | |
| * @dev: pin controller device | |
| * @property: property name in DTS, such as "bias-pull-up", "slew-rate", etc. | |
| * @default_value: return default value in case no value is specified in DTS | |
| * @return: return pamater ID, or negative error code on failure | |
| */ | |
| static int pinconf_prop_name_to_param(struct udevice *dev, | |
| const char *property, u32 *default_value) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| const struct pinconf_param *p, *end; | |
| if (!ops->pinconf_num_params || !ops->pinconf_params) { | |
| dev_dbg(dev, "pinconf_num_params or pinconf_params missing\n"); | |
| return -ENOSYS; | |
| } | |
| p = ops->pinconf_params; | |
| end = p + ops->pinconf_num_params; | |
| /* See if this pctldev supports this parameter */ | |
| for (; p < end; p++) { | |
| if (!strcmp(property, p->property)) { | |
| *default_value = p->default_value; | |
| return p->param; | |
| } | |
| } | |
| return -ENOSYS; | |
| } | |
| /** | |
| * pinconf_enable_setting() - apply pin configuration for a certain pin/group | |
| * | |
| * @dev: pin controller device | |
| * @is_group: target of operation (true: pin group, false: pin) | |
| * @selector: pin selector or group selector, depending on @is_group | |
| * @param: configuration paramter | |
| * @argument: argument taken by some configuration parameters | |
| * @return: 0 on success, or negative error code on failure | |
| */ | |
| static int pinconf_enable_setting(struct udevice *dev, bool is_group, | |
| unsigned selector, unsigned param, | |
| u32 argument) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| if (is_group) { | |
| if (!ops->pinconf_group_set) { | |
| dev_dbg(dev, "pinconf_group_set op missing\n"); | |
| return -ENOSYS; | |
| } | |
| return ops->pinconf_group_set(dev, selector, param, | |
| argument); | |
| } else { | |
| if (!ops->pinconf_set) { | |
| dev_dbg(dev, "pinconf_set op missing\n"); | |
| return -ENOSYS; | |
| } | |
| return ops->pinconf_set(dev, selector, param, argument); | |
| } | |
| } | |
| #else | |
| static int pinconf_prop_name_to_param(struct udevice *dev, | |
| const char *property, u32 *default_value) | |
| { | |
| return -ENOSYS; | |
| } | |
| static int pinconf_enable_setting(struct udevice *dev, bool is_group, | |
| unsigned selector, unsigned param, | |
| u32 argument) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| enum pinmux_subnode_type { | |
| PST_NONE = 0, | |
| PST_PIN, | |
| PST_GROUP, | |
| PST_PINMUX, | |
| }; | |
| /** | |
| * pinctrl_generic_set_state_one() - set state for a certain pin/group | |
| * Apply all pin multiplexing and pin configurations specified by @config | |
| * for a given pin or pin group. | |
| * | |
| * @dev: pin controller device | |
| * @config: pseudo device pointing to config node | |
| * @subnode_type: target of operation (pin, group, or pin specified by a pinmux | |
| * group) | |
| * @selector: pin selector or group selector, depending on @subnode_type | |
| * @return: 0 on success, or negative error code on failure | |
| */ | |
| static int pinctrl_generic_set_state_one(struct udevice *dev, | |
| struct udevice *config, | |
| enum pinmux_subnode_type subnode_type, | |
| unsigned selector) | |
| { | |
| const char *propname; | |
| const void *value; | |
| struct ofprop property; | |
| int len, func_selector, param, ret; | |
| u32 arg, default_val; | |
| assert(subnode_type != PST_NONE); | |
| dev_for_each_property(property, config) { | |
| value = dev_read_prop_by_prop(&property, &propname, &len); | |
| if (!value) | |
| return -EINVAL; | |
| /* pinmux subnodes already have their muxing set */ | |
| if (subnode_type != PST_PINMUX && | |
| !strcmp(propname, "function")) { | |
| func_selector = pinmux_func_name_to_selector(dev, | |
| value); | |
| if (func_selector < 0) | |
| return func_selector; | |
| ret = pinmux_enable_setting(dev, | |
| subnode_type == PST_GROUP, | |
| selector, | |
| func_selector); | |
| } else { | |
| param = pinconf_prop_name_to_param(dev, propname, | |
| &default_val); | |
| if (param < 0) | |
| continue; /* just skip unknown properties */ | |
| if (len >= sizeof(fdt32_t)) | |
| arg = fdt32_to_cpu(*(fdt32_t *)value); | |
| else | |
| arg = default_val; | |
| ret = pinconf_enable_setting(dev, | |
| subnode_type == PST_GROUP, | |
| selector, param, arg); | |
| } | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * pinctrl_generic_get_subnode_type() - determine whether there is a valid | |
| * pins, groups, or pinmux property in the config node | |
| * | |
| * @dev: pin controller device | |
| * @config: pseudo device pointing to config node | |
| * @count: number of specifiers contained within the property | |
| * @return: the type of the subnode, or PST_NONE | |
| */ | |
| static enum pinmux_subnode_type pinctrl_generic_get_subnode_type(struct udevice *dev, | |
| struct udevice *config, | |
| int *count) | |
| { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| *count = dev_read_string_count(config, "pins"); | |
| if (*count >= 0) | |
| return PST_PIN; | |
| *count = dev_read_string_count(config, "groups"); | |
| if (*count >= 0) | |
| return PST_GROUP; | |
| if (ops->pinmux_property_set) { | |
| *count = dev_read_size(config, "pinmux"); | |
| if (*count >= 0 && !(*count % sizeof(u32))) { | |
| *count /= sizeof(u32); | |
| return PST_PINMUX; | |
| } | |
| } | |
| *count = 0; | |
| return PST_NONE; | |
| } | |
| /** | |
| * pinctrl_generic_set_state_subnode() - apply all settings in config node | |
| * | |
| * @dev: pin controller device | |
| * @config: pseudo device pointing to config node | |
| * @return: 0 on success, or negative error code on failure | |
| */ | |
| static int pinctrl_generic_set_state_subnode(struct udevice *dev, | |
| struct udevice *config) | |
| { | |
| enum pinmux_subnode_type subnode_type; | |
| const char *name; | |
| int count, selector, i, ret, scratch; | |
| const u32 *pinmux_groups = NULL; /* prevent use-uninitialized warning */ | |
| subnode_type = pinctrl_generic_get_subnode_type(dev, config, &count); | |
| debug("%s(%s, %s): count=%d\n", __func__, dev->name, config->name, | |
| count); | |
| if (subnode_type == PST_PINMUX) { | |
| pinmux_groups = dev_read_prop(config, "pinmux", &scratch); | |
| if (!pinmux_groups) | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < count; i++) { | |
| switch (subnode_type) { | |
| case PST_PIN: | |
| ret = dev_read_string_index(config, "pins", i, &name); | |
| if (ret) | |
| return ret; | |
| selector = pinctrl_pin_name_to_selector(dev, name); | |
| break; | |
| case PST_GROUP: | |
| ret = dev_read_string_index(config, "groups", i, &name); | |
| if (ret) | |
| return ret; | |
| selector = pinctrl_group_name_to_selector(dev, name); | |
| break; | |
| case PST_PINMUX: { | |
| const struct pinctrl_ops *ops = pinctrl_get_ops(dev); | |
| u32 pinmux_group = fdt32_to_cpu(pinmux_groups[i]); | |
| /* Checked for in pinctrl_generic_get_subnode_type */ | |
| selector = ops->pinmux_property_set(dev, pinmux_group); | |
| break; | |
| } | |
| case PST_NONE: | |
| default: | |
| /* skip this node; may contain config child nodes */ | |
| return 0; | |
| } | |
| if (selector < 0) | |
| return selector; | |
| ret = pinctrl_generic_set_state_one(dev, config, subnode_type, | |
| selector); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| int pinctrl_generic_set_state(struct udevice *dev, struct udevice *config) | |
| { | |
| struct udevice *child; | |
| int ret; | |
| ret = pinctrl_generic_set_state_subnode(dev, config); | |
| if (ret) | |
| return ret; | |
| for (device_find_first_child(config, &child); | |
| child; | |
| device_find_next_child(&child)) { | |
| ret = pinctrl_generic_set_state_subnode(dev, child); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } |