| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ | |
| * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> | |
| */ | |
| #include <dm.h> | |
| #include <log.h> | |
| #include <dm/device.h> | |
| #include <generic-phy.h> | |
| #include <asm/io.h> | |
| #include <asm/arch/psc_defs.h> | |
| #include <linux/bitops.h> | |
| #include <linux/delay.h> | |
| #include <linux/printk.h> | |
| /* USB PHY control register offsets */ | |
| #define USB_PHY_CTL_UTMI 0x0000 | |
| #define USB_PHY_CTL_PIPE 0x0004 | |
| #define USB_PHY_CTL_PARAM_1 0x0008 | |
| #define USB_PHY_CTL_PARAM_2 0x000c | |
| #define USB_PHY_CTL_CLOCK 0x0010 | |
| #define USB_PHY_CTL_PLL 0x0014 | |
| #define PHY_OTG_VBUSVLDECTSEL BIT(16) | |
| #define PHY_REF_SSP_EN BIT(29) | |
| struct keystone_usb_phy { | |
| u32 psc_domain; | |
| void __iomem *reg; | |
| }; | |
| static int keystone_usb_init(struct phy *phy) | |
| { | |
| u32 val; | |
| int rc; | |
| struct udevice *dev = phy->dev; | |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); | |
| /* Release USB from reset */ | |
| rc = psc_enable_module(keystone->psc_domain); | |
| if (rc) { | |
| debug("Cannot enable USB module"); | |
| return -rc; | |
| } | |
| mdelay(10); | |
| /* | |
| * VBUSVLDEXTSEL has a default value of 1 in BootCfg but shouldn't. | |
| * It should always be cleared because our USB PHY has an onchip VBUS | |
| * analog comparator. | |
| */ | |
| val = readl(keystone->reg + USB_PHY_CTL_CLOCK); | |
| /* quit selecting the vbusvldextsel by default! */ | |
| val &= ~PHY_OTG_VBUSVLDECTSEL; | |
| writel(val, keystone->reg + USB_PHY_CTL_CLOCK); | |
| return 0; | |
| } | |
| static int keystone_usb_power_on(struct phy *phy) | |
| { | |
| u32 val; | |
| struct udevice *dev = phy->dev; | |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); | |
| val = readl(keystone->reg + USB_PHY_CTL_CLOCK); | |
| val |= PHY_REF_SSP_EN; | |
| writel(val, keystone->reg + USB_PHY_CTL_CLOCK); | |
| return 0; | |
| } | |
| static int keystone_usb_power_off(struct phy *phy) | |
| { | |
| u32 val; | |
| struct udevice *dev = phy->dev; | |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); | |
| val = readl(keystone->reg + USB_PHY_CTL_CLOCK); | |
| val &= ~PHY_REF_SSP_EN; | |
| writel(val, keystone->reg + USB_PHY_CTL_CLOCK); | |
| return 0; | |
| } | |
| static int keystone_usb_exit(struct phy *phy) | |
| { | |
| struct udevice *dev = phy->dev; | |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); | |
| if (psc_disable_module(keystone->psc_domain)) | |
| debug("failed to disable USB module!\n"); | |
| return 0; | |
| } | |
| static int keystone_usb_phy_probe(struct udevice *dev) | |
| { | |
| int rc; | |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); | |
| rc = dev_read_u32(dev, "psc-domain", &keystone->psc_domain); | |
| if (rc) | |
| return rc; | |
| keystone->reg = dev_remap_addr_index(dev, 0); | |
| if (!keystone->reg) { | |
| pr_err("unable to remap usb phy\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static const struct udevice_id keystone_usb_phy_ids[] = { | |
| { .compatible = "ti,keystone-usbphy" }, | |
| { } | |
| }; | |
| static struct phy_ops keystone_usb_phy_ops = { | |
| .init = keystone_usb_init, | |
| .power_on = keystone_usb_power_on, | |
| .power_off = keystone_usb_power_off, | |
| .exit = keystone_usb_exit, | |
| }; | |
| U_BOOT_DRIVER(keystone_usb_phy) = { | |
| .name = "keystone_usb_phy", | |
| .id = UCLASS_PHY, | |
| .of_match = keystone_usb_phy_ids, | |
| .ops = &keystone_usb_phy_ops, | |
| .probe = keystone_usb_phy_probe, | |
| .priv_auto = sizeof(struct keystone_usb_phy), | |
| }; |