| /* | |
| * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ | |
| * | |
| * Driver for SPI controller on DaVinci. Based on atmel_spi.c | |
| * by Atmel Corporation | |
| * | |
| * Copyright (C) 2007 Atmel Corporation | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <spi.h> | |
| #include <malloc.h> | |
| #include <asm/io.h> | |
| #include <asm/arch/hardware.h> | |
| #include "davinci_spi.h" | |
| void spi_init() | |
| { | |
| /* do nothing */ | |
| } | |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, | |
| unsigned int max_hz, unsigned int mode) | |
| { | |
| struct davinci_spi_slave *ds; | |
| if (!spi_cs_is_valid(bus, cs)) | |
| return NULL; | |
| ds = malloc(sizeof(*ds)); | |
| if (!ds) | |
| return NULL; | |
| ds->slave.bus = bus; | |
| ds->slave.cs = cs; | |
| ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE; | |
| ds->freq = max_hz; | |
| return &ds->slave; | |
| } | |
| void spi_free_slave(struct spi_slave *slave) | |
| { | |
| struct davinci_spi_slave *ds = to_davinci_spi(slave); | |
| free(ds); | |
| } | |
| int spi_claim_bus(struct spi_slave *slave) | |
| { | |
| struct davinci_spi_slave *ds = to_davinci_spi(slave); | |
| unsigned int scalar; | |
| /* Enable the SPI hardware */ | |
| writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); | |
| udelay(1000); | |
| writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0); | |
| /* Set master mode, powered up and not activated */ | |
| writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1); | |
| /* CS, CLK, SIMO and SOMI are functional pins */ | |
| writel((SPIPC0_EN0FUN_MASK | SPIPC0_CLKFUN_MASK | | |
| SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); | |
| /* setup format */ | |
| scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; | |
| /* | |
| * Use following format: | |
| * character length = 8, | |
| * clock signal delayed by half clk cycle, | |
| * clock low in idle state - Mode 0, | |
| * MSB shifted out first | |
| */ | |
| writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) | | |
| (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0); | |
| /* | |
| * Including a minor delay. No science here. Should be good even with | |
| * no delay | |
| */ | |
| writel((50 << SPI_C2TDELAY_SHIFT) | | |
| (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay); | |
| /* default chip select register */ | |
| writel(SPIDEF_CSDEF0_MASK, &ds->regs->def); | |
| /* no interrupts */ | |
| writel(0, &ds->regs->int0); | |
| writel(0, &ds->regs->lvl); | |
| /* enable SPI */ | |
| writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); | |
| return 0; | |
| } | |
| void spi_release_bus(struct spi_slave *slave) | |
| { | |
| struct davinci_spi_slave *ds = to_davinci_spi(slave); | |
| /* Disable the SPI hardware */ | |
| writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); | |
| } | |
| /* | |
| * This functions needs to act like a macro to avoid pipeline reloads in the | |
| * loops below. Use always_inline. This gains us about 160KiB/s and the bloat | |
| * appears to be zero bytes (da830). | |
| */ | |
| __attribute__((always_inline)) | |
| static inline u32 davinci_spi_xfer_data(struct davinci_spi_slave *ds, u32 data) | |
| { | |
| u32 buf_reg_val; | |
| /* send out data */ | |
| writel(data, &ds->regs->dat1); | |
| /* wait for the data to clock in/out */ | |
| while ((buf_reg_val = readl(&ds->regs->buf)) & SPIBUF_RXEMPTY_MASK) | |
| ; | |
| return buf_reg_val; | |
| } | |
| static int davinci_spi_read(struct spi_slave *slave, unsigned int len, | |
| u8 *rxp, unsigned long flags) | |
| { | |
| struct davinci_spi_slave *ds = to_davinci_spi(slave); | |
| unsigned int data1_reg_val; | |
| /* enable CS hold, CS[n] and clear the data bits */ | |
| data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) | | |
| (slave->cs << SPIDAT1_CSNR_SHIFT)); | |
| /* wait till TXFULL is deasserted */ | |
| while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) | |
| ; | |
| /* preload the TX buffer to avoid clock starvation */ | |
| writel(data1_reg_val, &ds->regs->dat1); | |
| /* keep reading 1 byte until only 1 byte left */ | |
| while ((len--) > 1) | |
| *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val); | |
| /* clear CS hold when we reach the end */ | |
| if (flags & SPI_XFER_END) | |
| data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT); | |
| /* read the last byte */ | |
| *rxp = davinci_spi_xfer_data(ds, data1_reg_val); | |
| return 0; | |
| } | |
| static int davinci_spi_write(struct spi_slave *slave, unsigned int len, | |
| const u8 *txp, unsigned long flags) | |
| { | |
| struct davinci_spi_slave *ds = to_davinci_spi(slave); | |
| unsigned int data1_reg_val; | |
| /* enable CS hold and clear the data bits */ | |
| data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) | | |
| (slave->cs << SPIDAT1_CSNR_SHIFT)); | |
| /* wait till TXFULL is deasserted */ | |
| while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) | |
| ; | |
| /* preload the TX buffer to avoid clock starvation */ | |
| if (len > 2) { | |
| writel(data1_reg_val | *txp++, &ds->regs->dat1); | |
| len--; | |
| } | |
| /* keep writing 1 byte until only 1 byte left */ | |
| while ((len--) > 1) | |
| davinci_spi_xfer_data(ds, data1_reg_val | *txp++); | |
| /* clear CS hold when we reach the end */ | |
| if (flags & SPI_XFER_END) | |
| data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT); | |
| /* write the last byte */ | |
| davinci_spi_xfer_data(ds, data1_reg_val | *txp); | |
| return 0; | |
| } | |
| #ifndef CONFIG_SPI_HALF_DUPLEX | |
| static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len, | |
| u8 *rxp, const u8 *txp, unsigned long flags) | |
| { | |
| struct davinci_spi_slave *ds = to_davinci_spi(slave); | |
| unsigned int data1_reg_val; | |
| /* enable CS hold and clear the data bits */ | |
| data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) | | |
| (slave->cs << SPIDAT1_CSNR_SHIFT)); | |
| /* wait till TXFULL is deasserted */ | |
| while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) | |
| ; | |
| /* keep reading and writing 1 byte until only 1 byte left */ | |
| while ((len--) > 1) | |
| *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val | *txp++); | |
| /* clear CS hold when we reach the end */ | |
| if (flags & SPI_XFER_END) | |
| data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT); | |
| /* read and write the last byte */ | |
| *rxp = davinci_spi_xfer_data(ds, data1_reg_val | *txp); | |
| return 0; | |
| } | |
| #endif | |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, | |
| const void *dout, void *din, unsigned long flags) | |
| { | |
| unsigned int len; | |
| if (bitlen == 0) | |
| /* Finish any previously submitted transfers */ | |
| goto out; | |
| /* | |
| * It's not clear how non-8-bit-aligned transfers are supposed to be | |
| * represented as a stream of bytes...this is a limitation of | |
| * the current SPI interface - here we terminate on receiving such a | |
| * transfer request. | |
| */ | |
| if (bitlen % 8) { | |
| /* Errors always terminate an ongoing transfer */ | |
| flags |= SPI_XFER_END; | |
| goto out; | |
| } | |
| len = bitlen / 8; | |
| if (!dout) | |
| return davinci_spi_read(slave, len, din, flags); | |
| else if (!din) | |
| return davinci_spi_write(slave, len, dout, flags); | |
| #ifndef CONFIG_SPI_HALF_DUPLEX | |
| else | |
| return davinci_spi_read_write(slave, len, din, dout, flags); | |
| #else | |
| printf("SPI full duplex transaction requested with " | |
| "CONFIG_SPI_HALF_DUPLEX defined.\n"); | |
| flags |= SPI_XFER_END; | |
| #endif | |
| out: | |
| if (flags & SPI_XFER_END) { | |
| u8 dummy = 0; | |
| davinci_spi_write(slave, 1, &dummy, flags); | |
| } | |
| return 0; | |
| } | |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) | |
| { | |
| return bus == 0 && cs == 0; | |
| } | |
| void spi_cs_activate(struct spi_slave *slave) | |
| { | |
| /* do nothing */ | |
| } | |
| void spi_cs_deactivate(struct spi_slave *slave) | |
| { | |
| /* do nothing */ | |
| } |