| /* | |
| * (C) Copyright 2000 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <mpc8xx.h> | |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ | |
| #if defined(CONFIG_ENV_IS_IN_FLASH) | |
| # ifndef CONFIG_ENV_ADDR | |
| # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | |
| # endif | |
| # ifndef CONFIG_ENV_SIZE | |
| # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE | |
| # endif | |
| # ifndef CONFIG_ENV_SECT_SIZE | |
| # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE | |
| # endif | |
| #endif | |
| #define QUAD_ID(id) ((((ulong)(id) & 0xFF) << 24) | \ | |
| (((ulong)(id) & 0xFF) << 16) | \ | |
| (((ulong)(id) & 0xFF) << 8) | \ | |
| (((ulong)(id) & 0xFF) << 0) \ | |
| ) | |
| /*----------------------------------------------------------------------- | |
| * Functions | |
| */ | |
| static ulong flash_get_size (vu_long * addr, flash_info_t * info); | |
| static int write_word (flash_info_t * info, ulong dest, ulong data); | |
| /*----------------------------------------------------------------------- | |
| */ | |
| unsigned long flash_init (void) | |
| { | |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; | |
| volatile memctl8xx_t *memctl = &immap->im_memctl; | |
| vu_long *bcsr = (vu_long *)BCSR_ADDR; | |
| unsigned long pd_size, total_size, bsize, or_am; | |
| int i; | |
| /* Init: no FLASHes known */ | |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { | |
| flash_info[i].flash_id = FLASH_UNKNOWN; | |
| flash_info[i].size = 0; | |
| flash_info[i].sector_count = 0; | |
| flash_info[i].start[0] = 0xFFFFFFFF; /* For TFTP */ | |
| } | |
| switch ((bcsr[2] & BCSR2_FLASH_PD_MASK) >> BCSR2_FLASH_PD_SHIFT) { | |
| case 2: | |
| case 4: | |
| case 6: | |
| pd_size = 0x800000; | |
| or_am = 0xFF800000; | |
| break; | |
| case 5: | |
| case 7: | |
| pd_size = 0x400000; | |
| or_am = 0xFFC00000; | |
| break; | |
| case 8: | |
| pd_size = 0x200000; | |
| or_am = 0xFFE00000; | |
| break; | |
| default: | |
| pd_size = 0; | |
| or_am = 0xFFE00000; | |
| printf("## Unsupported flash detected by BCSR: 0x%08lX\n", bcsr[2]); | |
| } | |
| total_size = 0; | |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS && total_size < pd_size; ++i) { | |
| bsize = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + total_size), | |
| &flash_info[i]); | |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) { | |
| printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", | |
| i, bsize, bsize >> 20); | |
| } | |
| total_size += bsize; | |
| } | |
| if (total_size != pd_size) { | |
| printf("## Detected flash size %lu conflicts with PD data %lu\n", | |
| total_size, pd_size); | |
| } | |
| /* Remap FLASH according to real size */ | |
| memctl->memc_or0 = or_am | CONFIG_SYS_OR_TIMING_FLASH; | |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i) { | |
| #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE | |
| /* monitor protection ON by default */ | |
| if (CONFIG_SYS_MONITOR_BASE >= flash_info[i].start[0]) | |
| flash_protect (FLAG_PROTECT_SET, | |
| CONFIG_SYS_MONITOR_BASE, | |
| CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, | |
| &flash_info[i]); | |
| #endif | |
| #ifdef CONFIG_ENV_IS_IN_FLASH | |
| /* ENV protection ON by default */ | |
| if (CONFIG_ENV_ADDR >= flash_info[i].start[0]) | |
| flash_protect (FLAG_PROTECT_SET, | |
| CONFIG_ENV_ADDR, | |
| CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, | |
| &flash_info[i]); | |
| #endif | |
| } | |
| return total_size; | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| void flash_print_info (flash_info_t * info) | |
| { | |
| int i; | |
| if (info->flash_id == FLASH_UNKNOWN) { | |
| printf ("missing or unknown FLASH type\n"); | |
| return; | |
| } | |
| switch (info->flash_id & FLASH_VENDMASK) { | |
| case FLASH_MAN_AMD: | |
| printf ("AMD "); | |
| break; | |
| case FLASH_MAN_FUJ: | |
| printf ("FUJITSU "); | |
| break; | |
| case FLASH_MAN_BM: | |
| printf ("BRIGHT MICRO "); | |
| break; | |
| default: | |
| printf ("Unknown Vendor "); | |
| break; | |
| } | |
| switch (info->flash_id & FLASH_TYPEMASK) { | |
| case FLASH_AM040: | |
| printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); | |
| break; | |
| case FLASH_AM080: | |
| printf ("29F080 or 29LV080 (8 Mbit, uniform sectors)\n"); | |
| break; | |
| case FLASH_AM400B: | |
| printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM400T: | |
| printf ("AM29LV400T (4 Mbit, top boot sector)\n"); | |
| break; | |
| case FLASH_AM800B: | |
| printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM800T: | |
| printf ("AM29LV800T (8 Mbit, top boot sector)\n"); | |
| break; | |
| case FLASH_AM160B: | |
| printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM160T: | |
| printf ("AM29LV160T (16 Mbit, top boot sector)\n"); | |
| break; | |
| case FLASH_AM320B: | |
| printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM320T: | |
| printf ("AM29LV320T (32 Mbit, top boot sector)\n"); | |
| break; | |
| default: | |
| printf ("Unknown Chip Type\n"); | |
| break; | |
| } | |
| printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, | |
| info->sector_count); | |
| printf (" Sector Start Addresses:"); | |
| for (i = 0; i < info->sector_count; ++i) { | |
| if ((i % 5) == 0) { | |
| printf ("\n "); | |
| } | |
| printf (" %08lX%s", | |
| info->start[i], info->protect[i] ? " (RO)" : " "); | |
| } | |
| printf ("\n"); | |
| } | |
| /*----------------------------------------------------------------------- | |
| * The following code can not run from flash! | |
| */ | |
| static ulong flash_get_size (vu_long * addr, flash_info_t * info) | |
| { | |
| short i; | |
| /* Write auto select command: read Manufacturer ID */ | |
| addr[0x0555] = 0xAAAAAAAA; | |
| addr[0x02AA] = 0x55555555; | |
| addr[0x0555] = 0x90909090; | |
| switch (addr[0]) { | |
| case QUAD_ID(AMD_MANUFACT): | |
| info->flash_id = FLASH_MAN_AMD; | |
| break; | |
| case QUAD_ID(FUJ_MANUFACT): | |
| info->flash_id = FLASH_MAN_FUJ; | |
| break; | |
| default: | |
| info->flash_id = FLASH_UNKNOWN; | |
| info->sector_count = 0; | |
| info->size = 0; | |
| break; | |
| } | |
| switch (addr[1]) { /* device ID */ | |
| case QUAD_ID(AMD_ID_F040B): | |
| case QUAD_ID(AMD_ID_LV040B): | |
| info->flash_id += FLASH_AM040; | |
| info->sector_count = 8; | |
| info->size = 0x00200000; | |
| break; /* => 2 MB */ | |
| case QUAD_ID(AMD_ID_F080B): | |
| info->flash_id += FLASH_AM080; | |
| info->sector_count = 16; | |
| info->size = 0x00400000; | |
| break; /* => 4 MB */ | |
| #if 0 | |
| case AMD_ID_LV400T: | |
| info->flash_id += FLASH_AM400T; | |
| info->sector_count = 11; | |
| info->size = 0x00100000; | |
| break; /* => 1 MB */ | |
| case AMD_ID_LV400B: | |
| info->flash_id += FLASH_AM400B; | |
| info->sector_count = 11; | |
| info->size = 0x00100000; | |
| break; /* => 1 MB */ | |
| case AMD_ID_LV800T: | |
| info->flash_id += FLASH_AM800T; | |
| info->sector_count = 19; | |
| info->size = 0x00200000; | |
| break; /* => 2 MB */ | |
| case AMD_ID_LV800B: | |
| info->flash_id += FLASH_AM800B; | |
| info->sector_count = 19; | |
| info->size = 0x00200000; | |
| break; /* => 2 MB */ | |
| case AMD_ID_LV160T: | |
| info->flash_id += FLASH_AM160T; | |
| info->sector_count = 35; | |
| info->size = 0x00400000; | |
| break; /* => 4 MB */ | |
| case AMD_ID_LV160B: | |
| info->flash_id += FLASH_AM160B; | |
| info->sector_count = 35; | |
| info->size = 0x00400000; | |
| break; /* => 4 MB */ | |
| case AMD_ID_LV320T: | |
| info->flash_id += FLASH_AM320T; | |
| info->sector_count = 67; | |
| info->size = 0x00800000; | |
| break; /* => 8 MB */ | |
| case AMD_ID_LV320B: | |
| info->flash_id += FLASH_AM320B; | |
| info->sector_count = 67; | |
| info->size = 0x00800000; | |
| break; /* => 8 MB */ | |
| #endif /* 0 */ | |
| default: | |
| info->flash_id = FLASH_UNKNOWN; | |
| return (0); /* => no or unknown flash */ | |
| } | |
| #if 0 | |
| /* set up sector start address table */ | |
| if (info->flash_id & FLASH_BTYPE) { | |
| /* set sector offsets for bottom boot block type */ | |
| info->start[0] = base + 0x00000000; | |
| info->start[1] = base + 0x00008000; | |
| info->start[2] = base + 0x0000C000; | |
| info->start[3] = base + 0x00010000; | |
| for (i = 4; i < info->sector_count; i++) { | |
| info->start[i] = base + (i * 0x00020000) - 0x00060000; | |
| } | |
| } else { | |
| /* set sector offsets for top boot block type */ | |
| i = info->sector_count - 1; | |
| info->start[i--] = base + info->size - 0x00008000; | |
| info->start[i--] = base + info->size - 0x0000C000; | |
| info->start[i--] = base + info->size - 0x00010000; | |
| for (; i >= 0; i--) { | |
| info->start[i] = base + i * 0x00020000; | |
| } | |
| } | |
| #else | |
| /* set sector offsets for uniform sector type */ | |
| for (i = 0; i < info->sector_count; i++) | |
| info->start[i] = (ulong)addr + (i * 0x00040000); | |
| #endif | |
| /* check for protected sectors */ | |
| for (i = 0; i < info->sector_count; i++) { | |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | |
| /* D0 = 1 if protected */ | |
| addr = (volatile unsigned long *) (info->start[i]); | |
| info->protect[i] = addr[2] & 1; | |
| } | |
| if (info->flash_id != FLASH_UNKNOWN) { | |
| addr = (volatile unsigned long *) info->start[0]; | |
| *addr = 0xF0F0F0F0; /* reset bank */ | |
| } | |
| return (info->size); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| int flash_erase (flash_info_t * info, int s_first, int s_last) | |
| { | |
| vu_long *addr = (vu_long *) (info->start[0]); | |
| int flag, prot, sect, l_sect; | |
| ulong start, now, last; | |
| if ((s_first < 0) || (s_first > s_last)) { | |
| if (info->flash_id == FLASH_UNKNOWN) { | |
| printf ("- missing\n"); | |
| } else { | |
| printf ("- no sectors to erase\n"); | |
| } | |
| return ERR_INVAL; | |
| } | |
| if ((info->flash_id == FLASH_UNKNOWN) || | |
| (info->flash_id > FLASH_AMD_COMP)) { | |
| printf ("Can't erase unknown flash type - aborted\n"); | |
| return ERR_UNKNOWN_FLASH_TYPE; | |
| } | |
| prot = 0; | |
| for (sect = s_first; sect <= s_last; ++sect) { | |
| if (info->protect[sect]) { | |
| prot++; | |
| } | |
| } | |
| if (prot) { | |
| printf ("- Warning: %d protected sectors will not be erased!\n", prot); | |
| } else { | |
| printf ("\n"); | |
| } | |
| l_sect = -1; | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts (); | |
| addr[0x0555] = 0xAAAAAAAA; | |
| addr[0x02AA] = 0x55555555; | |
| addr[0x0555] = 0x80808080; | |
| addr[0x0555] = 0xAAAAAAAA; | |
| addr[0x02AA] = 0x55555555; | |
| /* Start erase on unprotected sectors */ | |
| for (sect = s_first; sect <= s_last; sect++) { | |
| if (info->protect[sect] == 0) { /* not protected */ | |
| addr = (vu_long *) (info->start[sect]); | |
| addr[0] = 0x30303030; | |
| l_sect = sect; | |
| } | |
| } | |
| /* re-enable interrupts if necessary */ | |
| if (flag) | |
| enable_interrupts (); | |
| /* wait at least 80us - let's wait 1 ms */ | |
| udelay (1000); | |
| /* | |
| * We wait for the last triggered sector | |
| */ | |
| if (l_sect < 0) | |
| goto DONE; | |
| start = get_timer (0); | |
| last = start; | |
| addr = (vu_long *) (info->start[l_sect]); | |
| while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF) | |
| { | |
| if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { | |
| printf ("Timeout\n"); | |
| return ERR_TIMOUT; | |
| } | |
| /* show that we're waiting */ | |
| if ((now - last) > 1000) { /* every second */ | |
| putc ('.'); | |
| last = now; | |
| } | |
| } | |
| DONE: | |
| /* reset to read mode */ | |
| addr = (volatile unsigned long *) info->start[0]; | |
| addr[0] = 0xF0F0F0F0; /* reset bank */ | |
| printf (" done\n"); | |
| return 0; | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Copy memory to flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) | |
| { | |
| ulong cp, wp, data; | |
| int i, l, rc; | |
| wp = (addr & ~3); /* get lower word aligned address */ | |
| /* | |
| * handle unaligned start bytes | |
| */ | |
| if ((l = addr - wp) != 0) { | |
| data = 0; | |
| for (i = 0, cp = wp; i < l; ++i, ++cp) { | |
| data = (data << 8) | (*(uchar *) cp); | |
| } | |
| for (; i < 4 && cnt > 0; ++i) { | |
| data = (data << 8) | *src++; | |
| --cnt; | |
| ++cp; | |
| } | |
| for (; cnt == 0 && i < 4; ++i, ++cp) { | |
| data = (data << 8) | (*(uchar *) cp); | |
| } | |
| if ((rc = write_word (info, wp, data)) != 0) { | |
| return (rc); | |
| } | |
| wp += 4; | |
| } | |
| /* | |
| * handle word aligned part | |
| */ | |
| while (cnt >= 4) { | |
| data = 0; | |
| for (i = 0; i < 4; ++i) { | |
| data = (data << 8) | *src++; | |
| } | |
| if ((rc = write_word (info, wp, data)) != 0) { | |
| return (rc); | |
| } | |
| wp += 4; | |
| cnt -= 4; | |
| } | |
| if (cnt == 0) { | |
| return (0); | |
| } | |
| /* | |
| * handle unaligned tail bytes | |
| */ | |
| data = 0; | |
| for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { | |
| data = (data << 8) | *src++; | |
| --cnt; | |
| } | |
| for (; i < 4; ++i, ++cp) { | |
| data = (data << 8) | (*(uchar *) cp); | |
| } | |
| return (write_word (info, wp, data)); | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Write a word to Flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| static int write_word (flash_info_t * info, ulong dest, ulong data) | |
| { | |
| vu_long *addr = (vu_long *) (info->start[0]); | |
| ulong start; | |
| int flag; | |
| /* Check if Flash is (sufficiently) erased */ | |
| if ((*((vu_long *) dest) & data) != data) { | |
| return ERR_NOT_ERASED; | |
| } | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts (); | |
| addr[0x0555] = 0xAAAAAAAA; | |
| addr[0x02AA] = 0x55555555; | |
| addr[0x0555] = 0xA0A0A0A0; | |
| *((vu_long *) dest) = data; | |
| /* re-enable interrupts if necessary */ | |
| if (flag) | |
| enable_interrupts (); | |
| /* data polling for D7 */ | |
| start = get_timer (0); | |
| while ((*((vu_long *) dest) & 0x80808080) != (data & 0x80808080)) | |
| { | |
| if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { | |
| return ERR_TIMOUT; | |
| } | |
| } | |
| return (0); | |
| } |