| /* | |
| * (C) Copyright 2011 - 2012 Samsung Electronics | |
| * EXT2/4 filesystem implementation in Uboot by | |
| * Uma Shankar <uma.shankar@samsung.com> | |
| * Manjunatha C Achar <a.manjunatha@samsung.com> | |
| * | |
| * Ext4fs support | |
| * made from existing cmd_ext2.c file of Uboot | |
| * | |
| * (C) Copyright 2004 | |
| * esd gmbh <www.esd-electronics.com> | |
| * Reinhard Arlt <reinhard.arlt@esd-electronics.com> | |
| * | |
| * made from cmd_reiserfs by | |
| * | |
| * (C) Copyright 2003 - 2004 | |
| * Sysgo Real-Time Solutions, AG <www.elinos.com> | |
| * Pavel Bartusek <pba@sysgo.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| * | |
| */ | |
| /* | |
| * Changelog: | |
| * 0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c | |
| * file in uboot. Added ext4fs ls load and write support. | |
| */ | |
| #include <common.h> | |
| #include <part.h> | |
| #include <config.h> | |
| #include <command.h> | |
| #include <image.h> | |
| #include <linux/ctype.h> | |
| #include <asm/byteorder.h> | |
| #include <ext_common.h> | |
| #include <ext4fs.h> | |
| #include <linux/stat.h> | |
| #include <malloc.h> | |
| #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) | |
| #include <usb.h> | |
| #endif | |
| #if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION) | |
| #error DOS or EFI partition support must be selected | |
| #endif | |
| #define DOS_PART_MAGIC_OFFSET 0x1fe | |
| #define DOS_FS_TYPE_OFFSET 0x36 | |
| #define DOS_FS32_TYPE_OFFSET 0x52 | |
| int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc, | |
| char *const argv[]) | |
| { | |
| char *filename = NULL; | |
| char *ep; | |
| int dev; | |
| unsigned long part = 1; | |
| ulong addr = 0; | |
| ulong part_length; | |
| int filelen; | |
| disk_partition_t info; | |
| struct ext_filesystem *fs; | |
| char buf[12]; | |
| unsigned long count; | |
| const char *addr_str; | |
| count = 0; | |
| addr = simple_strtoul(argv[3], NULL, 16); | |
| filename = getenv("bootfile"); | |
| switch (argc) { | |
| case 3: | |
| addr_str = getenv("loadaddr"); | |
| if (addr_str != NULL) | |
| addr = simple_strtoul(addr_str, NULL, 16); | |
| else | |
| addr = CONFIG_SYS_LOAD_ADDR; | |
| break; | |
| case 4: | |
| break; | |
| case 5: | |
| filename = argv[4]; | |
| break; | |
| case 6: | |
| filename = argv[4]; | |
| count = simple_strtoul(argv[5], NULL, 16); | |
| break; | |
| default: | |
| return cmd_usage(cmdtp); | |
| } | |
| if (!filename) { | |
| puts("** No boot file defined **\n"); | |
| return 1; | |
| } | |
| dev = (int)simple_strtoul(argv[2], &ep, 16); | |
| ext4_dev_desc = get_dev(argv[1], dev); | |
| if (ext4_dev_desc == NULL) { | |
| printf("** Block device %s %d not supported\n", argv[1], dev); | |
| return 1; | |
| } | |
| if (init_fs(ext4_dev_desc)) | |
| return 1; | |
| fs = get_fs(); | |
| if (*ep) { | |
| if (*ep != ':') { | |
| puts("** Invalid boot device, use `dev[:part]' **\n"); | |
| goto fail; | |
| } | |
| part = simple_strtoul(++ep, NULL, 16); | |
| } | |
| if (part != 0) { | |
| if (get_partition_info(fs->dev_desc, part, &info)) { | |
| printf("** Bad partition %lu **\n", part); | |
| goto fail; | |
| } | |
| if (strncmp((char *)info.type, BOOT_PART_TYPE, | |
| strlen(BOOT_PART_TYPE)) != 0) { | |
| printf("** Invalid partition type \"%s\"" | |
| " (expect \"" BOOT_PART_TYPE "\")\n", info.type); | |
| goto fail; | |
| } | |
| printf("Loading file \"%s\" " | |
| "from %s device %d:%lu %s\n", | |
| filename, argv[1], dev, part, info.name); | |
| } else { | |
| printf("Loading file \"%s\" from %s device %d\n", | |
| filename, argv[1], dev); | |
| } | |
| part_length = ext4fs_set_blk_dev(fs->dev_desc, part); | |
| if (part_length == 0) { | |
| printf("**Bad partition - %s %d:%lu **\n", argv[1], dev, part); | |
| ext4fs_close(); | |
| goto fail; | |
| } | |
| if (!ext4fs_mount(part_length)) { | |
| printf("** Bad ext2 partition or disk - %s %d:%lu **\n", | |
| argv[1], dev, part); | |
| ext4fs_close(); | |
| goto fail; | |
| } | |
| filelen = ext4fs_open(filename); | |
| if (filelen < 0) { | |
| printf("** File not found %s\n", filename); | |
| ext4fs_close(); | |
| goto fail; | |
| } | |
| if ((count < filelen) && (count != 0)) | |
| filelen = count; | |
| if (ext4fs_read((char *)addr, filelen) != filelen) { | |
| printf("** Unable to read \"%s\" from %s %d:%lu **\n", | |
| filename, argv[1], dev, part); | |
| ext4fs_close(); | |
| goto fail; | |
| } | |
| ext4fs_close(); | |
| deinit_fs(fs->dev_desc); | |
| /* Loading ok, update default load address */ | |
| load_addr = addr; | |
| printf("%d bytes read\n", filelen); | |
| sprintf(buf, "%X", filelen); | |
| setenv("filesize", buf); | |
| return 0; | |
| fail: | |
| deinit_fs(fs->dev_desc); | |
| return 1; | |
| } | |
| int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) | |
| { | |
| const char *filename = "/"; | |
| int dev; | |
| unsigned long part = 1; | |
| char *ep; | |
| struct ext_filesystem *fs; | |
| int part_length; | |
| if (argc < 3) | |
| return cmd_usage(cmdtp); | |
| dev = (int)simple_strtoul(argv[2], &ep, 16); | |
| ext4_dev_desc = get_dev(argv[1], dev); | |
| if (ext4_dev_desc == NULL) { | |
| printf("\n** Block device %s %d not supported\n", argv[1], dev); | |
| return 1; | |
| } | |
| if (init_fs(ext4_dev_desc)) | |
| return 1; | |
| fs = get_fs(); | |
| if (*ep) { | |
| if (*ep != ':') { | |
| puts("\n** Invalid boot device, use `dev[:part]' **\n"); | |
| goto fail; | |
| } | |
| part = simple_strtoul(++ep, NULL, 16); | |
| } | |
| if (argc == 4) | |
| filename = argv[3]; | |
| part_length = ext4fs_set_blk_dev(fs->dev_desc, part); | |
| if (part_length == 0) { | |
| printf("** Bad partition - %s %d:%lu **\n", argv[1], dev, part); | |
| ext4fs_close(); | |
| goto fail; | |
| } | |
| if (!ext4fs_mount(part_length)) { | |
| printf("** Bad ext2 partition or disk - %s %d:%lu **\n", | |
| argv[1], dev, part); | |
| ext4fs_close(); | |
| goto fail; | |
| } | |
| if (ext4fs_ls(filename)) { | |
| printf("** Error extfs_ls() **\n"); | |
| ext4fs_close(); | |
| goto fail; | |
| }; | |
| ext4fs_close(); | |
| deinit_fs(fs->dev_desc); | |
| return 0; | |
| fail: | |
| deinit_fs(fs->dev_desc); | |
| return 1; | |
| } |