| /* | |
| * Copyright (C) 2009 BuS Elektronik GmbH & Co. KG | |
| * Jens Scharsig (esw@bus-elektronik.de) | |
| * | |
| * (C) Copyright 2003 | |
| * Author : Hamid Ikdoumi (Atmel) | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <asm/io.h> | |
| #ifndef CONFIG_AT91_LEGACY | |
| #include <asm/arch/hardware.h> | |
| #include <asm/arch/at91_emac.h> | |
| #include <asm/arch/at91_pmc.h> | |
| #include <asm/arch/at91_pio.h> | |
| #else | |
| /* remove next 5 lines, if all RM9200 boards convert to at91 arch */ | |
| #include <asm/arch-at91/at91rm9200.h> | |
| #include <asm/arch-at91/hardware.h> | |
| #include <asm/arch-at91/at91_emac.h> | |
| #include <asm/arch-at91/at91_pmc.h> | |
| #include <asm/arch-at91/at91_pio.h> | |
| #endif | |
| #include <net.h> | |
| #include <netdev.h> | |
| #include <malloc.h> | |
| #include <miiphy.h> | |
| #include <linux/mii.h> | |
| #undef MII_DEBUG | |
| #undef ET_DEBUG | |
| #if (CONFIG_SYS_RX_ETH_BUFFER > 1024) | |
| #error AT91 EMAC supports max 1024 RX buffers. \ | |
| Please decrease the CONFIG_SYS_RX_ETH_BUFFER value | |
| #endif | |
| #ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR | |
| #define CONFIG_DRIVER_AT91EMAC_PHYADDR 0 | |
| #endif | |
| /* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */ | |
| #if (AT91C_MASTER_CLOCK > 80000000) | |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_64 | |
| #elif (AT91C_MASTER_CLOCK > 40000000) | |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_32 | |
| #elif (AT91C_MASTER_CLOCK > 20000000) | |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_16 | |
| #else | |
| #define HCLK_DIV AT91_EMAC_CFG_MCLK_8 | |
| #endif | |
| #ifdef ET_DEBUG | |
| #define DEBUG_AT91EMAC 1 | |
| #else | |
| #define DEBUG_AT91EMAC 0 | |
| #endif | |
| #ifdef MII_DEBUG | |
| #define DEBUG_AT91PHY 1 | |
| #else | |
| #define DEBUG_AT91PHY 0 | |
| #endif | |
| #ifndef CONFIG_DRIVER_AT91EMAC_QUIET | |
| #define VERBOSEP 1 | |
| #else | |
| #define VERBOSEP 0 | |
| #endif | |
| #define RBF_ADDR 0xfffffffc | |
| #define RBF_OWNER (1<<0) | |
| #define RBF_WRAP (1<<1) | |
| #define RBF_BROADCAST (1<<31) | |
| #define RBF_MULTICAST (1<<30) | |
| #define RBF_UNICAST (1<<29) | |
| #define RBF_EXTERNAL (1<<28) | |
| #define RBF_UNKNOWN (1<<27) | |
| #define RBF_SIZE 0x07ff | |
| #define RBF_LOCAL4 (1<<26) | |
| #define RBF_LOCAL3 (1<<25) | |
| #define RBF_LOCAL2 (1<<24) | |
| #define RBF_LOCAL1 (1<<23) | |
| #define RBF_FRAMEMAX CONFIG_SYS_RX_ETH_BUFFER | |
| #define RBF_FRAMELEN 0x600 | |
| typedef struct { | |
| unsigned long addr, size; | |
| } rbf_t; | |
| typedef struct { | |
| rbf_t rbfdt[RBF_FRAMEMAX]; | |
| unsigned long rbindex; | |
| } emac_device; | |
| void at91emac_EnableMDIO(at91_emac_t *at91mac) | |
| { | |
| /* Mac CTRL reg set for MDIO enable */ | |
| writel(readl(&at91mac->ctl) | AT91_EMAC_CTL_MPE, &at91mac->ctl); | |
| } | |
| void at91emac_DisableMDIO(at91_emac_t *at91mac) | |
| { | |
| /* Mac CTRL reg set for MDIO disable */ | |
| writel(readl(&at91mac->ctl) & ~AT91_EMAC_CTL_MPE, &at91mac->ctl); | |
| } | |
| int at91emac_read(at91_emac_t *at91mac, unsigned char addr, | |
| unsigned char reg, unsigned short *value) | |
| { | |
| unsigned long netstat; | |
| at91emac_EnableMDIO(at91mac); | |
| writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R | | |
| AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 | | |
| AT91_EMAC_MAN_PHYA(addr), | |
| &at91mac->man); | |
| do { | |
| netstat = readl(&at91mac->sr); | |
| debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat); | |
| } while (!(netstat & AT91_EMAC_SR_IDLE)); | |
| *value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK; | |
| at91emac_DisableMDIO(at91mac); | |
| debug_cond(DEBUG_AT91PHY, | |
| "AT91PHY read %p REG(%d)=%x\n", at91mac, reg, *value); | |
| return 0; | |
| } | |
| int at91emac_write(at91_emac_t *at91mac, unsigned char addr, | |
| unsigned char reg, unsigned short value) | |
| { | |
| unsigned long netstat; | |
| debug_cond(DEBUG_AT91PHY, | |
| "AT91PHY write %p REG(%d)=%p\n", at91mac, reg, &value); | |
| at91emac_EnableMDIO(at91mac); | |
| writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_W | | |
| AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 | | |
| AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK), | |
| &at91mac->man); | |
| do { | |
| netstat = readl(&at91mac->sr); | |
| debug_cond(DEBUG_AT91PHY, "poll SR %08lx\n", netstat); | |
| } while (!(netstat & AT91_EMAC_SR_IDLE)); | |
| at91emac_DisableMDIO(at91mac); | |
| return 0; | |
| } | |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) | |
| at91_emac_t *get_emacbase_by_name(const char *devname) | |
| { | |
| struct eth_device *netdev; | |
| netdev = eth_get_dev_by_name(devname); | |
| return (at91_emac_t *) netdev->iobase; | |
| } | |
| int at91emac_mii_read(const char *devname, unsigned char addr, | |
| unsigned char reg, unsigned short *value) | |
| { | |
| at91_emac_t *emac; | |
| emac = get_emacbase_by_name(devname); | |
| at91emac_read(emac , addr, reg, value); | |
| return 0; | |
| } | |
| int at91emac_mii_write(const char *devname, unsigned char addr, | |
| unsigned char reg, unsigned short value) | |
| { | |
| at91_emac_t *emac; | |
| emac = get_emacbase_by_name(devname); | |
| at91emac_write(emac, addr, reg, value); | |
| return 0; | |
| } | |
| #endif | |
| static int at91emac_phy_reset(struct eth_device *netdev) | |
| { | |
| int i; | |
| u16 status, adv; | |
| at91_emac_t *emac; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| adv = ADVERTISE_CSMA | ADVERTISE_ALL; | |
| at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_ADVERTISE, adv); | |
| debug_cond(VERBOSEP, "%s: Starting autonegotiation...\n", netdev->name); | |
| at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR, | |
| (BMCR_ANENABLE | BMCR_ANRESTART)); | |
| for (i = 0; i < 30000; i++) { | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_BMSR, &status); | |
| if (status & BMSR_ANEGCOMPLETE) | |
| break; | |
| udelay(100); | |
| } | |
| if (status & BMSR_ANEGCOMPLETE) { | |
| debug_cond(VERBOSEP, | |
| "%s: Autonegotiation complete\n", netdev->name); | |
| } else { | |
| printf("%s: Autonegotiation timed out (status=0x%04x)\n", | |
| netdev->name, status); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int at91emac_phy_init(struct eth_device *netdev) | |
| { | |
| u16 phy_id, status, adv, lpa; | |
| int media, speed, duplex; | |
| int i; | |
| at91_emac_t *emac; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| /* Check if the PHY is up to snuff... */ | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_PHYSID1, &phy_id); | |
| if (phy_id == 0xffff) { | |
| printf("%s: No PHY present\n", netdev->name); | |
| return -1; | |
| } | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_BMSR, &status); | |
| if (!(status & BMSR_LSTATUS)) { | |
| /* Try to re-negotiate if we don't have link already. */ | |
| if (at91emac_phy_reset(netdev)) | |
| return -2; | |
| for (i = 0; i < 100000 / 100; i++) { | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_BMSR, &status); | |
| if (status & BMSR_LSTATUS) | |
| break; | |
| udelay(100); | |
| } | |
| } | |
| if (!(status & BMSR_LSTATUS)) { | |
| debug_cond(VERBOSEP, "%s: link down\n", netdev->name); | |
| return -3; | |
| } else { | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_ADVERTISE, &adv); | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, | |
| MII_LPA, &lpa); | |
| media = mii_nway_result(lpa & adv); | |
| speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) | |
| ? 1 : 0); | |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; | |
| debug_cond(VERBOSEP, "%s: link up, %sMbps %s-duplex\n", | |
| netdev->name, | |
| speed ? "100" : "10", | |
| duplex ? "full" : "half"); | |
| } | |
| return 0; | |
| } | |
| int at91emac_UpdateLinkSpeed(at91_emac_t *emac) | |
| { | |
| unsigned short stat1; | |
| at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1); | |
| if (!(stat1 & BMSR_LSTATUS)) /* link status up? */ | |
| return -1; | |
| if (stat1 & BMSR_100FULL) { | |
| /*set Emac for 100BaseTX and Full Duplex */ | |
| writel(readl(&emac->cfg) | | |
| AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD, | |
| &emac->cfg); | |
| return 0; | |
| } | |
| if (stat1 & BMSR_10FULL) { | |
| /*set MII for 10BaseT and Full Duplex */ | |
| writel((readl(&emac->cfg) & | |
| ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD) | |
| ) | AT91_EMAC_CFG_FD, | |
| &emac->cfg); | |
| return 0; | |
| } | |
| if (stat1 & BMSR_100HALF) { | |
| /*set MII for 100BaseTX and Half Duplex */ | |
| writel((readl(&emac->cfg) & | |
| ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD) | |
| ) | AT91_EMAC_CFG_SPD, | |
| &emac->cfg); | |
| return 0; | |
| } | |
| if (stat1 & BMSR_10HALF) { | |
| /*set MII for 10BaseT and Half Duplex */ | |
| writel((readl(&emac->cfg) & | |
| ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)), | |
| &emac->cfg); | |
| return 0; | |
| } | |
| return 0; | |
| } | |
| static int at91emac_init(struct eth_device *netdev, bd_t *bd) | |
| { | |
| int i; | |
| u32 value; | |
| emac_device *dev; | |
| at91_emac_t *emac; | |
| at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; | |
| at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| dev = (emac_device *) netdev->priv; | |
| /* PIO Disable Register */ | |
| value = ATMEL_PMX_AA_EMDIO | ATMEL_PMX_AA_EMDC | | |
| ATMEL_PMX_AA_ERXER | ATMEL_PMX_AA_ERX1 | | |
| ATMEL_PMX_AA_ERX0 | ATMEL_PMX_AA_ECRS | | |
| ATMEL_PMX_AA_ETX1 | ATMEL_PMX_AA_ETX0 | | |
| ATMEL_PMX_AA_ETXEN | ATMEL_PMX_AA_EREFCK; | |
| writel(value, &pio->pioa.pdr); | |
| writel(value, &pio->pioa.asr); | |
| #ifdef CONFIG_RMII | |
| value = ATMEL_PMX_BA_ERXCK; | |
| #else | |
| value = ATMEL_PMX_BA_ERXCK | ATMEL_PMX_BA_ECOL | | |
| ATMEL_PMX_BA_ERXDV | ATMEL_PMX_BA_ERX3 | | |
| ATMEL_PMX_BA_ERX2 | ATMEL_PMX_BA_ETXER | | |
| ATMEL_PMX_BA_ETX3 | ATMEL_PMX_BA_ETX2; | |
| #endif | |
| writel(value, &pio->piob.pdr); | |
| writel(value, &pio->piob.bsr); | |
| writel(1 << ATMEL_ID_EMAC, &pmc->pcer); | |
| writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); | |
| /* Init Ethernet buffers */ | |
| for (i = 0; i < RBF_FRAMEMAX; i++) { | |
| dev->rbfdt[i].addr = (unsigned long) NetRxPackets[i]; | |
| dev->rbfdt[i].size = 0; | |
| } | |
| dev->rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP; | |
| dev->rbindex = 0; | |
| writel((u32) &(dev->rbfdt[0]), &emac->rbqp); | |
| writel(readl(&emac->rsr) & | |
| ~(AT91_EMAC_RSR_OVR | AT91_EMAC_RSR_REC | AT91_EMAC_RSR_BNA), | |
| &emac->rsr); | |
| value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC | | |
| HCLK_DIV; | |
| #ifdef CONFIG_RMII | |
| value |= AT91_EMAC_CFG_RMII; | |
| #endif | |
| writel(value, &emac->cfg); | |
| writel(readl(&emac->ctl) | AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE, | |
| &emac->ctl); | |
| if (!at91emac_phy_init(netdev)) { | |
| at91emac_UpdateLinkSpeed(emac); | |
| return 0; | |
| } | |
| return -1; | |
| } | |
| static void at91emac_halt(struct eth_device *netdev) | |
| { | |
| at91_emac_t *emac; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE), | |
| &emac->ctl); | |
| debug_cond(DEBUG_AT91EMAC, "halt MAC\n"); | |
| } | |
| static int at91emac_send(struct eth_device *netdev, void *packet, int length) | |
| { | |
| at91_emac_t *emac; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| while (!(readl(&emac->tsr) & AT91_EMAC_TSR_BNQ)) | |
| ; | |
| writel((u32) packet, &emac->tar); | |
| writel(AT91_EMAC_TCR_LEN(length), &emac->tcr); | |
| while (AT91_EMAC_TCR_LEN(readl(&emac->tcr))) | |
| ; | |
| debug_cond(DEBUG_AT91EMAC, "Send %d\n", length); | |
| writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr); | |
| return 0; | |
| } | |
| static int at91emac_recv(struct eth_device *netdev) | |
| { | |
| emac_device *dev; | |
| at91_emac_t *emac; | |
| rbf_t *rbfp; | |
| int size; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| dev = (emac_device *) netdev->priv; | |
| rbfp = &dev->rbfdt[dev->rbindex]; | |
| while (rbfp->addr & RBF_OWNER) { | |
| size = rbfp->size & RBF_SIZE; | |
| NetReceive(NetRxPackets[dev->rbindex], size); | |
| debug_cond(DEBUG_AT91EMAC, "Recv[%ld]: %d bytes @ %lx\n", | |
| dev->rbindex, size, rbfp->addr); | |
| rbfp->addr &= ~RBF_OWNER; | |
| rbfp->size = 0; | |
| if (dev->rbindex < (RBF_FRAMEMAX-1)) | |
| dev->rbindex++; | |
| else | |
| dev->rbindex = 0; | |
| rbfp = &(dev->rbfdt[dev->rbindex]); | |
| if (!(rbfp->addr & RBF_OWNER)) | |
| writel(readl(&emac->rsr) | AT91_EMAC_RSR_REC, | |
| &emac->rsr); | |
| } | |
| if (readl(&emac->isr) & AT91_EMAC_IxR_RBNA) { | |
| /* EMAC silicon bug 41.3.1 workaround 1 */ | |
| writel(readl(&emac->ctl) & ~AT91_EMAC_CTL_RE, &emac->ctl); | |
| writel(readl(&emac->ctl) | AT91_EMAC_CTL_RE, &emac->ctl); | |
| dev->rbindex = 0; | |
| printf("%s: reset receiver (EMAC dead lock bug)\n", | |
| netdev->name); | |
| } | |
| return 0; | |
| } | |
| static int at91emac_write_hwaddr(struct eth_device *netdev) | |
| { | |
| at91_emac_t *emac; | |
| at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; | |
| emac = (at91_emac_t *) netdev->iobase; | |
| writel(1 << ATMEL_ID_EMAC, &pmc->pcer); | |
| debug_cond(DEBUG_AT91EMAC, | |
| "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n", | |
| netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3], | |
| netdev->enetaddr[2], netdev->enetaddr[1], netdev->enetaddr[0]); | |
| writel( (netdev->enetaddr[0] | netdev->enetaddr[1] << 8 | | |
| netdev->enetaddr[2] << 16 | netdev->enetaddr[3] << 24), | |
| &emac->sa2l); | |
| writel((netdev->enetaddr[4] | netdev->enetaddr[5] << 8), &emac->sa2h); | |
| debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %x%x\n", | |
| readl(&emac->sa2h), readl(&emac->sa2l)); | |
| return 0; | |
| } | |
| int at91emac_register(bd_t *bis, unsigned long iobase) | |
| { | |
| emac_device *emac; | |
| emac_device *emacfix; | |
| struct eth_device *dev; | |
| if (iobase == 0) | |
| iobase = ATMEL_BASE_EMAC; | |
| emac = malloc(sizeof(*emac)+512); | |
| if (emac == NULL) | |
| return -1; | |
| dev = malloc(sizeof(*dev)); | |
| if (dev == NULL) { | |
| free(emac); | |
| return -1; | |
| } | |
| /* alignment as per Errata (64 bytes) is insufficient! */ | |
| emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00); | |
| memset(emacfix, 0, sizeof(emac_device)); | |
| memset(dev, 0, sizeof(*dev)); | |
| sprintf(dev->name, "emac"); | |
| dev->iobase = iobase; | |
| dev->priv = emacfix; | |
| dev->init = at91emac_init; | |
| dev->halt = at91emac_halt; | |
| dev->send = at91emac_send; | |
| dev->recv = at91emac_recv; | |
| dev->write_hwaddr = at91emac_write_hwaddr; | |
| eth_register(dev); | |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) | |
| miiphy_register(dev->name, at91emac_mii_read, at91emac_mii_write); | |
| #endif | |
| return 1; | |
| } |