| /* | |
| * | |
| * (C) Copyright 2000-2003 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. | |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <spi.h> | |
| #include <malloc.h> | |
| #include <asm/immap.h> | |
| struct cf_spi_slave { | |
| struct spi_slave slave; | |
| uint baudrate; | |
| int charbit; | |
| }; | |
| int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, | |
| void *din, ulong flags); | |
| struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode); | |
| void cfspi_init(void); | |
| void cfspi_tx(u32 ctrl, u16 data); | |
| u16 cfspi_rx(void); | |
| extern void cfspi_port_conf(void); | |
| extern int cfspi_claim_bus(uint bus, uint cs); | |
| extern void cfspi_release_bus(uint bus, uint cs); | |
| DECLARE_GLOBAL_DATA_PTR; | |
| #ifndef CONFIG_SPI_IDLE_VAL | |
| #if defined(CONFIG_SPI_MMC) | |
| #define CONFIG_SPI_IDLE_VAL 0xFFFF | |
| #else | |
| #define CONFIG_SPI_IDLE_VAL 0x0 | |
| #endif | |
| #endif | |
| #if defined(CONFIG_CF_DSPI) | |
| /* DSPI specific mode */ | |
| #define SPI_MODE_MOD 0x00200000 | |
| #define SPI_DBLRATE 0x00100000 | |
| void cfspi_init(void) | |
| { | |
| volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | |
| cfspi_port_conf(); /* port configuration */ | |
| dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 | | |
| DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 | | |
| DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 | | |
| DSPI_MCR_CRXF | DSPI_MCR_CTXF; | |
| /* Default setting in platform configuration */ | |
| #ifdef CONFIG_SYS_DSPI_CTAR0 | |
| dspi->ctar[0] = CONFIG_SYS_DSPI_CTAR0; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR1 | |
| dspi->ctar[1] = CONFIG_SYS_DSPI_CTAR1; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR2 | |
| dspi->ctar[2] = CONFIG_SYS_DSPI_CTAR2; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR3 | |
| dspi->ctar[3] = CONFIG_SYS_DSPI_CTAR3; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR4 | |
| dspi->ctar[4] = CONFIG_SYS_DSPI_CTAR4; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR5 | |
| dspi->ctar[5] = CONFIG_SYS_DSPI_CTAR5; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR6 | |
| dspi->ctar[6] = CONFIG_SYS_DSPI_CTAR6; | |
| #endif | |
| #ifdef CONFIG_SYS_DSPI_CTAR7 | |
| dspi->ctar[7] = CONFIG_SYS_DSPI_CTAR7; | |
| #endif | |
| } | |
| void cfspi_tx(u32 ctrl, u16 data) | |
| { | |
| volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | |
| while ((dspi->sr & 0x0000F000) >= 4) ; | |
| dspi->tfr = (ctrl | data); | |
| } | |
| u16 cfspi_rx(void) | |
| { | |
| volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | |
| while ((dspi->sr & 0x000000F0) == 0) ; | |
| return (dspi->rfr & 0xFFFF); | |
| } | |
| int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, | |
| void *din, ulong flags) | |
| { | |
| struct cf_spi_slave *cfslave = (struct cf_spi_slave *)slave; | |
| u16 *spi_rd16 = NULL, *spi_wr16 = NULL; | |
| u8 *spi_rd = NULL, *spi_wr = NULL; | |
| static u32 ctrl = 0; | |
| uint len = bitlen >> 3; | |
| if (cfslave->charbit == 16) { | |
| bitlen >>= 1; | |
| spi_wr16 = (u16 *) dout; | |
| spi_rd16 = (u16 *) din; | |
| } else { | |
| spi_wr = (u8 *) dout; | |
| spi_rd = (u8 *) din; | |
| } | |
| if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN) | |
| ctrl |= DSPI_TFR_CONT; | |
| ctrl = (ctrl & 0xFF000000) | ((1 << slave->cs) << 16); | |
| if (len > 1) { | |
| int tmp_len = len - 1; | |
| while (tmp_len--) { | |
| if (dout != NULL) { | |
| if (cfslave->charbit == 16) | |
| cfspi_tx(ctrl, *spi_wr16++); | |
| else | |
| cfspi_tx(ctrl, *spi_wr++); | |
| cfspi_rx(); | |
| } | |
| if (din != NULL) { | |
| cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); | |
| if (cfslave->charbit == 16) | |
| *spi_rd16++ = cfspi_rx(); | |
| else | |
| *spi_rd++ = cfspi_rx(); | |
| } | |
| } | |
| len = 1; /* remaining byte */ | |
| } | |
| if ((flags & SPI_XFER_END) == SPI_XFER_END) | |
| ctrl &= ~DSPI_TFR_CONT; | |
| if (len) { | |
| if (dout != NULL) { | |
| if (cfslave->charbit == 16) | |
| cfspi_tx(ctrl, *spi_wr16); | |
| else | |
| cfspi_tx(ctrl, *spi_wr); | |
| cfspi_rx(); | |
| } | |
| if (din != NULL) { | |
| cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); | |
| if (cfslave->charbit == 16) | |
| *spi_rd16 = cfspi_rx(); | |
| else | |
| *spi_rd = cfspi_rx(); | |
| } | |
| } else { | |
| /* dummy read */ | |
| cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); | |
| cfspi_rx(); | |
| } | |
| return 0; | |
| } | |
| struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode) | |
| { | |
| /* | |
| * bit definition for mode: | |
| * bit 31 - 28: Transfer size 3 to 16 bits | |
| * 27 - 26: PCS to SCK delay prescaler | |
| * 25 - 24: After SCK delay prescaler | |
| * 23 - 22: Delay after transfer prescaler | |
| * 21 : Allow overwrite for bit 31-22 and bit 20-8 | |
| * 20 : Double baud rate | |
| * 19 - 16: PCS to SCK delay scaler | |
| * 15 - 12: After SCK delay scaler | |
| * 11 - 8: Delay after transfer scaler | |
| * 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST | |
| */ | |
| volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | |
| int prescaler[] = { 2, 3, 5, 7 }; | |
| int scaler[] = { | |
| 2, 4, 6, 8, | |
| 16, 32, 64, 128, | |
| 256, 512, 1024, 2048, | |
| 4096, 8192, 16384, 32768 | |
| }; | |
| int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0; | |
| int best_i, best_j, bestmatch = 0x7FFFFFFF, baud_speed; | |
| u32 bus_setup = 0; | |
| tmp = (prescaler[3] * scaler[15]); | |
| /* Maximum and minimum baudrate it can handle */ | |
| if ((cfslave->baudrate > (gd->bus_clk >> 1)) || | |
| (cfslave->baudrate < (gd->bus_clk / tmp))) { | |
| printf("Exceed baudrate limitation: Max %d - Min %d\n", | |
| (int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp)); | |
| return NULL; | |
| } | |
| /* Activate Double Baud when it exceed 1/4 the bus clk */ | |
| if ((CONFIG_SYS_DSPI_CTAR0 & DSPI_CTAR_DBR) || | |
| (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) { | |
| bus_setup |= DSPI_CTAR_DBR; | |
| dbr = 1; | |
| } | |
| if (mode & SPI_CPOL) | |
| bus_setup |= DSPI_CTAR_CPOL; | |
| if (mode & SPI_CPHA) | |
| bus_setup |= DSPI_CTAR_CPHA; | |
| if (mode & SPI_LSB_FIRST) | |
| bus_setup |= DSPI_CTAR_LSBFE; | |
| /* Overwrite default value set in platform configuration file */ | |
| if (mode & SPI_MODE_MOD) { | |
| if ((mode & 0xF0000000) == 0) | |
| bus_setup |= | |
| dspi->ctar[cfslave->slave.bus] & 0x78000000; | |
| else | |
| bus_setup |= ((mode & 0xF0000000) >> 1); | |
| /* | |
| * Check to see if it is enabled by default in platform | |
| * config, or manual setting passed by mode parameter | |
| */ | |
| if (mode & SPI_DBLRATE) { | |
| bus_setup |= DSPI_CTAR_DBR; | |
| dbr = 1; | |
| } | |
| bus_setup |= (mode & 0x0FC00000) >> 4; /* PSCSCK, PASC, PDT */ | |
| bus_setup |= (mode & 0x000FFF00) >> 4; /* CSSCK, ASC, DT */ | |
| } else | |
| bus_setup |= (dspi->ctar[cfslave->slave.bus] & 0x78FCFFF0); | |
| cfslave->charbit = | |
| ((dspi->ctar[cfslave->slave.bus] & 0x78000000) == | |
| 0x78000000) ? 16 : 8; | |
| pbrcnt = sizeof(prescaler) / sizeof(int); | |
| brcnt = sizeof(scaler) / sizeof(int); | |
| /* baudrate calculation - to closer value, may not be exact match */ | |
| for (best_i = 0, best_j = 0, i = 0; i < pbrcnt; i++) { | |
| baud_speed = gd->bus_clk / prescaler[i]; | |
| for (j = 0; j < brcnt; j++) { | |
| tmp = (baud_speed / scaler[j]) * (1 + dbr); | |
| if (tmp > cfslave->baudrate) | |
| diff = tmp - cfslave->baudrate; | |
| else | |
| diff = cfslave->baudrate - tmp; | |
| if (diff < bestmatch) { | |
| bestmatch = diff; | |
| best_i = i; | |
| best_j = j; | |
| } | |
| } | |
| } | |
| bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j)); | |
| dspi->ctar[cfslave->slave.bus] = bus_setup; | |
| return &cfslave->slave; | |
| } | |
| #endif /* CONFIG_CF_DSPI */ | |
| #ifdef CONFIG_CF_QSPI | |
| /* 52xx, 53xx */ | |
| #endif /* CONFIG_CF_QSPI */ | |
| #ifdef CONFIG_CMD_SPI | |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) | |
| { | |
| if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8))) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| void spi_init_f(void) | |
| { | |
| } | |
| void spi_init_r(void) | |
| { | |
| } | |
| void spi_init(void) | |
| { | |
| cfspi_init(); | |
| } | |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, | |
| unsigned int max_hz, unsigned int mode) | |
| { | |
| struct cf_spi_slave *cfslave; | |
| if (!spi_cs_is_valid(bus, cs)) | |
| return NULL; | |
| cfslave = malloc(sizeof(struct cf_spi_slave)); | |
| if (!cfslave) | |
| return NULL; | |
| cfslave->slave.bus = bus; | |
| cfslave->slave.cs = cs; | |
| cfslave->baudrate = max_hz; | |
| /* specific setup */ | |
| return cfspi_setup_slave(cfslave, mode); | |
| } | |
| void spi_free_slave(struct spi_slave *slave) | |
| { | |
| free(slave); | |
| } | |
| int spi_claim_bus(struct spi_slave *slave) | |
| { | |
| return cfspi_claim_bus(slave->bus, slave->cs); | |
| } | |
| void spi_release_bus(struct spi_slave *slave) | |
| { | |
| cfspi_release_bus(slave->bus, slave->cs); | |
| } | |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, | |
| void *din, unsigned long flags) | |
| { | |
| return cfspi_xfer(slave, bitlen, dout, din, flags); | |
| } | |
| #endif /* CONFIG_CMD_SPI */ |