| /* | |
| * Copyright (C) 2004-2005 Arabella Software Ltd. | |
| * Yuli Barcohen <yuli@arabellasw.com> | |
| * | |
| * Support for Analogue&Micro Adder boards family. | |
| * Tested on AdderII and Adder87x. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| #if !defined(CONFIG_MPC875) && !defined(CONFIG_MPC852T) | |
| #define CONFIG_MPC875 | |
| #endif | |
| #define CONFIG_ADDER /* Analogue&Micro Adder board */ | |
| #define CONFIG_SYS_TEXT_BASE 0xFE000000 | |
| #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ | |
| #define CONFIG_BAUDRATE 38400 | |
| #define CONFIG_ETHER_ON_FEC1 | |
| #define CONFIG_ETHER_ON_FEC2 | |
| #define CONFIG_HAS_ETH0 | |
| #define CONFIG_HAS_ETH1 | |
| #if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) | |
| #define CONFIG_SYS_DISCOVER_PHY | |
| #define CONFIG_MII_INIT 1 | |
| #define FEC_ENET | |
| #endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */ | |
| #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ | |
| #define CONFIG_8xx_CPUCLK_DEFAULT 50000000 | |
| #define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 | |
| #ifdef CONFIG_MPC852T | |
| #define CONFIG_SYS_8xx_CPUCLK_MAX 50000000 | |
| #else | |
| #define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 | |
| #endif /* CONFIG_MPC852T */ | |
| /* | |
| * BOOTP options | |
| */ | |
| #define CONFIG_BOOTP_BOOTFILESIZE | |
| #define CONFIG_BOOTP_BOOTPATH | |
| #define CONFIG_BOOTP_GATEWAY | |
| #define CONFIG_BOOTP_HOSTNAME | |
| /* | |
| * Command line configuration. | |
| */ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_CMD_IMMAP | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ | |
| #define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ | |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=1M(ROM)ro,-(root)" | |
| #define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ | |
| #undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ | |
| /*----------------------------------------------------------------------- | |
| * Miscellaneous configurable options | |
| */ | |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| #define CONFIG_SYS_HUSH_PARSER | |
| #define CONFIG_SYS_LONGHELP /* #undef to save memory */ | |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ | |
| #define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ | |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| #define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */ | |
| #define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ | |
| /*----------------------------------------------------------------------- | |
| * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) | |
| */ | |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 | |
| #define CONFIG_SYS_SDRAM_MAX_SIZE 0x01000000 /* Up to 16 Mbyte */ | |
| #define CONFIG_SYS_MAMR 0x00002114 | |
| /* | |
| * 4096 Up to 4096 SDRAM rows | |
| * 1000 factor s -> ms | |
| * 32 PTP (pre-divider from MPTPR) | |
| * 4 Number of refresh cycles per period | |
| * 64 Refresh cycle in ms per number of rows | |
| */ | |
| #define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) | |
| #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ | |
| #define CONFIG_SYS_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ | |
| #define CONFIG_SYS_RESET_ADDRESS 0x09900000 | |
| /*----------------------------------------------------------------------- | |
| * For booting Linux, the board info and command line data | |
| * have to be in the first 8 MB of memory, since this is | |
| * the maximum mapped by the Linux kernel during initialization. | |
| */ | |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ | |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ | |
| #ifdef CONFIG_BZIP2 | |
| #define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ | |
| #else | |
| #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ | |
| #endif /* CONFIG_BZIP2 */ | |
| /*----------------------------------------------------------------------- | |
| * Flash organisation | |
| */ | |
| #define CONFIG_SYS_FLASH_BASE 0xFE000000 | |
| #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ | |
| #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ | |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ | |
| /* Environment is in flash */ | |
| #define CONFIG_ENV_IS_IN_FLASH | |
| #define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ | |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) | |
| #define CONFIG_ENV_OVERWRITE | |
| #define CONFIG_SYS_OR0_PRELIM 0xFF000774 | |
| #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V) | |
| #define CONFIG_SYS_DIRECT_FLASH_TFTP | |
| /*----------------------------------------------------------------------- | |
| * Internal Memory Map Register | |
| */ | |
| #define CONFIG_SYS_IMMR 0xFF000000 | |
| /*----------------------------------------------------------------------- | |
| * Definitions for initial stack pointer and data area (in DPRAM) | |
| */ | |
| #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR | |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ | |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| /*----------------------------------------------------------------------- | |
| * Configuration registers | |
| */ | |
| #ifdef CONFIG_WATCHDOG | |
| #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ | |
| SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ | |
| SYPCR_SWP) | |
| #else | |
| #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ | |
| SYPCR_SWF | SYPCR_SWP) | |
| #endif /* CONFIG_WATCHDOG */ | |
| #define CONFIG_SYS_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) | |
| /* TBSCR - Time Base Status and Control Register */ | |
| #define CONFIG_SYS_TBSCR (TBSCR_TBF | TBSCR_TBE) | |
| /* PISCR - Periodic Interrupt Status and Control */ | |
| #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) | |
| /* PLPRCR - PLL, Low-Power, and Reset Control Register */ | |
| /* #define CONFIG_SYS_PLPRCR PLPRCR_TEXPS */ | |
| /* SCCR - System Clock and reset Control Register */ | |
| #define SCCR_MASK SCCR_EBDF11 | |
| #define CONFIG_SYS_SCCR SCCR_RTSEL | |
| #define CONFIG_SYS_DER 0 | |
| /*----------------------------------------------------------------------- | |
| * Cache Configuration | |
| */ | |
| #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx chips */ | |
| /* pass open firmware flat tree */ | |
| #define CONFIG_OF_LIBFDT 1 | |
| #define CONFIG_OF_BOARD_SETUP 1 | |
| #endif /* __CONFIG_H */ |