| /* | |
| * Configuation settings for the Freescale MCF5475 board. | |
| * | |
| * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. | |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /* | |
| * board/config.h - configuration options, board specific | |
| */ | |
| #ifndef _M5475EVB_H | |
| #define _M5475EVB_H | |
| /* | |
| * High Level Configuration Options | |
| * (easy to change) | |
| */ | |
| #define CONFIG_MCF547x_8x /* define processor family */ | |
| #define CONFIG_M547x /* define processor type */ | |
| #define CONFIG_M5475 /* define processor type */ | |
| #define CONFIG_MCFUART | |
| #define CONFIG_SYS_UART_PORT (0) | |
| #define CONFIG_BAUDRATE 115200 | |
| #define CONFIG_HW_WATCHDOG | |
| #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ | |
| /* Command line configuration */ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_CMD_CACHE | |
| #undef CONFIG_CMD_DATE | |
| #define CONFIG_CMD_ELF | |
| #define CONFIG_CMD_FLASH | |
| #define CONFIG_CMD_I2C | |
| #define CONFIG_CMD_MEMORY | |
| #define CONFIG_CMD_MISC | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_CMD_NET | |
| #define CONFIG_CMD_PCI | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_CMD_REGINFO | |
| #define CONFIG_CMD_USB | |
| #define CONFIG_SLTTMR | |
| #define CONFIG_FSLDMAFEC | |
| #ifdef CONFIG_FSLDMAFEC | |
| # define CONFIG_MII 1 | |
| # define CONFIG_MII_INIT 1 | |
| # define CONFIG_HAS_ETH1 | |
| # define CONFIG_SYS_DMA_USE_INTSRAM 1 | |
| # define CONFIG_SYS_DISCOVER_PHY | |
| # define CONFIG_SYS_RX_ETH_BUFFER 32 | |
| # define CONFIG_SYS_TX_ETH_BUFFER 48 | |
| # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
| # define CONFIG_SYS_FEC0_PINMUX 0 | |
| # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE | |
| # define CONFIG_SYS_FEC1_PINMUX 0 | |
| # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE | |
| # define MCFFEC_TOUT_LOOP 50000 | |
| /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ | |
| # ifndef CONFIG_SYS_DISCOVER_PHY | |
| # define FECDUPLEX FULL | |
| # define FECSPEED _100BASET | |
| # else | |
| # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
| # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
| # endif | |
| # endif /* CONFIG_SYS_DISCOVER_PHY */ | |
| # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 | |
| # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 | |
| # define CONFIG_IPADDR 192.162.1.2 | |
| # define CONFIG_NETMASK 255.255.255.0 | |
| # define CONFIG_SERVERIP 192.162.1.1 | |
| # define CONFIG_GATEWAYIP 192.162.1.1 | |
| # define CONFIG_OVERWRITE_ETHADDR_ONCE | |
| #endif | |
| #ifdef CONFIG_CMD_USB | |
| # define CONFIG_USB_OHCI_NEW | |
| # define CONFIG_USB_STORAGE | |
| # ifndef CONFIG_CMD_PCI | |
| # define CONFIG_CMD_PCI | |
| # endif | |
| # define CONFIG_PCI_OHCI | |
| # define CONFIG_DOS_PARTITION | |
| # undef CONFIG_SYS_USB_OHCI_BOARD_INIT | |
| # undef CONFIG_SYS_USB_OHCI_CPU_INIT | |
| # define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 | |
| # define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561" | |
| # define CONFIG_SYS_OHCI_SWAP_REG_ACCESS | |
| #endif | |
| /* I2C */ | |
| #define CONFIG_FSL_I2C | |
| #define CONFIG_HARD_I2C /* I2C with hw support */ | |
| #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| #define CONFIG_SYS_I2C_SPEED 80000 | |
| #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| #define CONFIG_SYS_I2C_OFFSET 0x00008F00 | |
| #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR | |
| /* PCI */ | |
| #ifdef CONFIG_CMD_PCI | |
| #define CONFIG_PCI 1 | |
| #define CONFIG_PCI_PNP 1 | |
| #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 | |
| #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8 | |
| #define CONFIG_SYS_PCI_MEM_BUS 0x80000000 | |
| #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS | |
| #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 | |
| #define CONFIG_SYS_PCI_IO_BUS 0x71000000 | |
| #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS | |
| #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 | |
| #define CONFIG_SYS_PCI_CFG_BUS 0x70000000 | |
| #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS | |
| #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 | |
| #endif | |
| #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ | |
| #define CONFIG_UDP_CHECKSUM | |
| #ifdef CONFIG_MCFFEC | |
| # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 | |
| # define CONFIG_IPADDR 192.162.1.2 | |
| # define CONFIG_NETMASK 255.255.255.0 | |
| # define CONFIG_SERVERIP 192.162.1.1 | |
| # define CONFIG_GATEWAYIP 192.162.1.1 | |
| # define CONFIG_OVERWRITE_ETHADDR_ONCE | |
| #endif /* FEC_ENET */ | |
| #define CONFIG_HOSTNAME M547xEVB | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| "netdev=eth0\0" \ | |
| "loadaddr=10000\0" \ | |
| "u-boot=u-boot.bin\0" \ | |
| "load=tftp ${loadaddr) ${u-boot}\0" \ | |
| "upd=run load; run prog\0" \ | |
| "prog=prot off bank 1;" \ | |
| "era ff800000 ff83ffff;" \ | |
| "cp.b ${loadaddr} ff800000 ${filesize};"\ | |
| "save\0" \ | |
| "" | |
| #define CONFIG_PRAM 512 /* 512 KB */ | |
| #define CONFIG_SYS_PROMPT "-> " | |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| #ifdef CONFIG_CMD_KGDB | |
| # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| #else | |
| # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| #endif | |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ | |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| #define CONFIG_SYS_LOAD_ADDR 0x00010000 | |
| #define CONFIG_SYS_HZ 1000 | |
| #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK | |
| #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 | |
| #define CONFIG_SYS_MBAR 0xF0000000 | |
| #define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000) | |
| #define CONFIG_SYS_INTSRAMSZ 0x8000 | |
| /*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/ | |
| /* | |
| * Low Level Configuration Settings | |
| * (address mappings, register initial values, etc.) | |
| * You should know what you are doing if you make changes here. | |
| */ | |
| /*----------------------------------------------------------------------- | |
| * Definitions for initial stack pointer and data area (in DPRAM) | |
| */ | |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 | |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ | |
| #define CONFIG_SYS_INIT_RAM_CTRL 0x21 | |
| #define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) | |
| #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ | |
| #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 | |
| #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) | |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| /*----------------------------------------------------------------------- | |
| * Start addresses for the final memory configuration | |
| * (Set up by the startup code) | |
| * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 | |
| */ | |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 | |
| #define CONFIG_SYS_SDRAM_CFG1 0x73711630 | |
| #define CONFIG_SYS_SDRAM_CFG2 0x46770000 | |
| #define CONFIG_SYS_SDRAM_CTRL 0xE10B0000 | |
| #define CONFIG_SYS_SDRAM_EMOD 0x40010000 | |
| #define CONFIG_SYS_SDRAM_MODE 0x018D0000 | |
| #define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA | |
| #ifdef CONFIG_SYS_DRAMSZ1 | |
| # define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1) | |
| #else | |
| # define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ | |
| #endif | |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 | |
| #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) | |
| #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) | |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ | |
| #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 | |
| /* Reserve 256 kB for malloc() */ | |
| #define CONFIG_SYS_MALLOC_LEN (256 << 10) | |
| /* | |
| * For booting Linux, the board info and command line data | |
| * have to be in the first 8 MB of memory, since this is | |
| * the maximum mapped by the Linux kernel during initialization ?? | |
| */ | |
| #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) | |
| /*----------------------------------------------------------------------- | |
| * FLASH organization | |
| */ | |
| #define CONFIG_SYS_FLASH_CFI | |
| #ifdef CONFIG_SYS_FLASH_CFI | |
| # define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) | |
| # define CONFIG_FLASH_CFI_DRIVER 1 | |
| # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
| # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ | |
| # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ | |
| # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| #ifdef CONFIG_SYS_NOR1SZ | |
| # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ | |
| # define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20) | |
| # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } | |
| #else | |
| # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| # define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20) | |
| #endif | |
| #endif | |
| /* Configuration for environment | |
| * Environment is not embedded in u-boot but at offset 0x40000 on the flash. | |
| * First time runing may have env crc error warning if there is | |
| * no correct environment on the flash. | |
| */ | |
| #define CONFIG_ENV_OFFSET 0x40000 | |
| #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| #define CONFIG_ENV_IS_IN_FLASH 1 | |
| /*----------------------------------------------------------------------- | |
| * Cache Configuration | |
| */ | |
| #define CONFIG_SYS_CACHELINE_SIZE 16 | |
| #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
| CONFIG_SYS_INIT_RAM_SIZE - 8) | |
| #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
| CONFIG_SYS_INIT_RAM_SIZE - 4) | |
| #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ | |
| CF_CACR_IDCM) | |
| #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) | |
| #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ | |
| CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ | |
| CF_ACR_EN | CF_ACR_SM_ALL) | |
| #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ | |
| CF_CACR_IEC | CF_CACR_ICINVA) | |
| #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ | |
| CF_CACR_DEC | CF_CACR_DDCM_P | \ | |
| CF_CACR_DCINVA) & ~CF_CACR_ICINVA) | |
| /*----------------------------------------------------------------------- | |
| * Chipselect bank definitions | |
| */ | |
| /* | |
| * CS0 - NOR Flash 1, 2, 4, or 8MB | |
| * CS1 - NOR Flash | |
| * CS2 - Available | |
| * CS3 - Available | |
| * CS4 - Available | |
| * CS5 - Available | |
| */ | |
| #define CONFIG_SYS_CS0_BASE 0xFF800000 | |
| #define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001) | |
| #define CONFIG_SYS_CS0_CTRL 0x00101980 | |
| #ifdef CONFIG_SYS_NOR1SZ | |
| #define CONFIG_SYS_CS1_BASE 0xE0000000 | |
| #define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001) | |
| #define CONFIG_SYS_CS1_CTRL 0x00101D80 | |
| #endif | |
| #endif /* _M5475EVB_H */ |