| /* | |
| * (C) Copyright 2003 | |
| * Texas Instruments. | |
| * Kshitij Gupta <kshitij@ti.com> | |
| * Configuation settings for the TI OMAP Innovator board. | |
| * | |
| * (C) Copyright 2004 | |
| * ARM Ltd. | |
| * Philippe Robin, <philippe.robin@arm.com> | |
| * Configuration for Integrator AP board. | |
| *. | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| #define CONFIG_INTEGRATOR | |
| #define CONFIG_ARCH_INTEGRATOR | |
| /* | |
| * High Level Configuration Options | |
| * (easy to change) | |
| */ | |
| #define CONFIG_SYS_TEXT_BASE 0x01000000 | |
| #define CONFIG_SYS_MEMTEST_START 0x100000 | |
| #define CONFIG_SYS_MEMTEST_END 0x10000000 | |
| #define CONFIG_SYS_HZ 1000 | |
| #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ | |
| #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ | |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ | |
| #define CONFIG_SETUP_MEMORY_TAGS 1 | |
| #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ | |
| #define CONFIG_SKIP_LOWLEVEL_INIT | |
| #define CONFIG_CM_INIT 1 | |
| #define CONFIG_CM_REMAP 1 | |
| #define CONFIG_CM_SPD_DETECT | |
| /* | |
| * Size of malloc() pool | |
| */ | |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) | |
| /* | |
| * PL010 Configuration | |
| */ | |
| #define CONFIG_PL010_SERIAL | |
| #define CONFIG_CONS_INDEX 0 | |
| #define CONFIG_BAUDRATE 38400 | |
| #define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } | |
| #define CONFIG_SYS_SERIAL0 0x16000000 | |
| #define CONFIG_SYS_SERIAL1 0x17000000 | |
| /* | |
| * BOOTP options | |
| */ | |
| #define CONFIG_BOOTP_BOOTFILESIZE | |
| #define CONFIG_BOOTP_BOOTPATH | |
| #define CONFIG_BOOTP_GATEWAY | |
| #define CONFIG_BOOTP_HOSTNAME | |
| /* | |
| * Command line configuration. | |
| */ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_BOOTDELAY 2 | |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" | |
| #define CONFIG_BOOTCOMMAND "" | |
| /* | |
| * Miscellaneous configurable options | |
| */ | |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| #define CONFIG_SYS_HUSH_PARSER | |
| #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ | |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| /* Print Buffer Size */ | |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ | |
| /*----------------------------------------------------------------------- | |
| * Physical Memory Map | |
| */ | |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ | |
| #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ | |
| #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ | |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 | |
| #define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE | |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ | |
| CONFIG_SYS_INIT_RAM_SIZE - \ | |
| GENERATED_GBL_DATA_SIZE) | |
| #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET | |
| #define CONFIG_SYS_FLASH_BASE 0x24000000 | |
| /*----------------------------------------------------------------------- | |
| * FLASH and environment organization | |
| */ | |
| #define CONFIG_SYS_FLASH_CFI 1 | |
| #define CONFIG_FLASH_CFI_DRIVER 1 | |
| #define CONFIG_ENV_IS_NOWHERE | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| /* timeout values are in ticks */ | |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ | |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ | |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 | |
| #define CONFIG_ENV_SIZE 32768 | |
| /*----------------------------------------------------------------------- | |
| * PCI definitions | |
| */ | |
| #define CONFIG_PCI | |
| #define CONFIG_CMD_PCI | |
| #define CONFIG_PCI_PNP | |
| #define CONFIG_NET_MULTI | |
| #define CONFIG_TULIP | |
| #define CONFIG_EEPRO100 | |
| #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ | |
| /*----------------------------------------------------------------------- | |
| * There are various dependencies on the core module (CM) fitted | |
| * Users should refer to their CM user guide | |
| * - when porting adjust u-boot/Makefile accordingly | |
| * to define the necessary CONFIG_ s for the CM involved | |
| * see e.g. integratorcp_CM926EJ-S_config | |
| */ | |
| #include "armcoremodule.h" | |
| #endif /* __CONFIG_H */ |