include/configs/otc570.h - u-boot - Git at Google


            
            /*

            
             * (C) Copyright 2010-2011

            
             * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>

            
             * esd electronic system design gmbh <www.esd.eu>

            
             *

            
             * (C) Copyright 2007-2008

            
             * Stelian Pop <stelian@popies.net>

            
             * Lead Tech Design <www.leadtechdesign.com>

            
             *

            
             * Configuation settings for the esd OTC570 board.

            
             *

            
             * See file CREDITS for list of people who contributed to this

            
             * project.

            
             *

            
             * This program is free software; you can redistribute it and/or

            
             * modify it under the terms of the GNU General Public License as

            
             * published by the Free Software Foundation; either version 2 of

            
             * the License, or (at your option) any later version.

            
             *

            
             * This program is distributed in the hope that it will be useful,

            
             * but WITHOUT ANY WARRANTY; without even the implied warranty of

            
             * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

            
             * GNU General Public License for more details.

            
             *

            
             * You should have received a copy of the GNU General Public License

            
             * along with this program; if not, write to the Free Software

            
             * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

            
             * MA 02111-1307 USA

            
             */


            #ifndef __CONFIG_H

            
            #define __CONFIG_H


            /*

            
             * SoC must be defined first, before hardware.h is included.

            
             * In this case SoC is defined in boards.cfg.

            
             */

            
            #include <asm/hardware.h>


            /*

            
             * Warning: changing CONFIG_SYS_TEXT_BASE requires

            
             * adapting the initial boot program.

            
             * Since the linker has to swallow that define, we must use a pure

            
             * hex number here!

            
             */

            
            #define CONFIG_SYS_TEXT_BASE		0x20002000


            /*

            
             * since a number of boards are not being listed in linux

            
             * arch/arm/tools/mach-types any more, the mach-types have to be

            
             * defined here

            
             */

            
            #define MACH_TYPE_OTC570		2166


            /* ARM asynchronous clock */

            
            #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */

            
            #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */

            
            #define CONFIG_SYS_HZ			1000	/* decrementer freq */


            /* Misc CPU related */

            
            #define CONFIG_SKIP_LOWLEVEL_INIT

            
            #define CONFIG_ARCH_CPU_INIT

            
            #define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */

            
            #define CONFIG_SETUP_MEMORY_TAGS

            
            #define CONFIG_INITRD_TAG

            
            #define CONFIG_SERIAL_TAG

            
            #define CONFIG_REVISION_TAG

            
            #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */

            
            #define CONFIG_MISC_INIT_R			/* Call misc_init_r */


            #define CONFIG_DISPLAY_BOARDINFO		/* call checkboard() */

            
            #define CONFIG_DISPLAY_CPUINFO			/* display cpu info and speed */

            
            #define CONFIG_PREBOOT				/* enable preboot variable */


            /*

            
             * Hardware drivers

            
             */


            /* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */

            
            #define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP


            /* general purpose I/O */

            
            #define CONFIG_AT91_GPIO


            /* Console output */

            
            #define CONFIG_ATMEL_USART

            
            #define CONFIG_USART_BASE		ATMEL_BASE_DBGU

            
            #define CONFIG_USART_ID			ATMEL_ID_SYS

            
            #define CONFIG_BAUDRATE			115200


            #define CONFIG_BOOTDELAY		3

            
            #define CONFIG_ZERO_BOOTDELAY_CHECK


            /* LCD */

            
            #define CONFIG_LCD

            
            #undef CONFIG_SPLASH_SCREEN


            #ifdef CONFIG_LCD

            
            # define LCD_BPP			LCD_COLOR8


            # ifndef CONFIG_SPLASH_SCREEN

            
            #  define CONFIG_LCD_LOGO

            
            #  define CONFIG_LCD_INFO

            
            #  undef CONFIG_LCD_INFO_BELOW_LOGO

            
            # endif /* CONFIG_SPLASH_SCREEN */


            # undef LCD_TEST_PATTERN

            
            # define CONFIG_SYS_WHITE_ON_BLACK

            
            # define CONFIG_ATMEL_LCD

            
            # define CONFIG_SYS_CONSOLE_IS_IN_ENV

            
            # define CONFIG_OTC570_LCD_BASE		(CONFIG_SYS_SDRAM_BASE + 0x03fa5000)

            
            # define CONFIG_CMD_BMP

            
            #endif /* CONFIG_LCD */


            /* RTC and I2C stuff */

            
            #define CONFIG_RTC_DS1338

            
            #define CONFIG_SYS_I2C_RTC_ADDR		0x68

            
            #undef CONFIG_HARD_I2C

            
            #define CONFIG_SOFT_I2C

            
            #define CONFIG_SYS_I2C_SPEED		100000

            
            #define CONFIG_SYS_I2C_SLAVE		0x7F


            #ifdef CONFIG_SOFT_I2C

            
            # define CONFIG_I2C_CMD_TREE

            
            # define CONFIG_I2C_MULTI_BUS

            
            /* Configure data and clock pins for pio */

            
            # define I2C_INIT { \

            
            	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \

            
            	at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \

            
            }

            
            # define I2C_SOFT_DECLARATIONS

            
            /* Configure data pin as output */

            
            # define I2C_ACTIVE		at91_set_pio_output(AT91_PIO_PORTB, 4, 0)

            
            /* Configure data pin as input */

            
            # define I2C_TRISTATE		at91_set_pio_input(AT91_PIO_PORTB, 4, 0)

            
            /* Read data pin */

            
            # define I2C_READ		at91_get_pio_value(AT91_PIO_PORTB, 4)

            
            /* Set data pin */

            
            # define I2C_SDA(bit)		at91_set_pio_value(AT91_PIO_PORTB, 4, bit)

            
            /* Set clock pin */

            
            # define I2C_SCL(bit)		at91_set_pio_value(AT91_PIO_PORTB, 5, bit)

            
            # define I2C_DELAY		udelay(2) /* 1/4 I2C clock duration */

            
            #endif /* CONFIG_SOFT_I2C */


            /*

            
             * BOOTP options

            
             */

            
            #define CONFIG_BOOTP_BOOTFILESIZE

            
            #define CONFIG_BOOTP_BOOTPATH

            
            #define CONFIG_BOOTP_GATEWAY

            
            #define CONFIG_BOOTP_HOSTNAME


            /*

            
             * Command line configuration.

            
             */

            
            #include <config_cmd_default.h>

            
            #undef CONFIG_CMD_FPGA

            
            #undef CONFIG_CMD_LOADS

            
            #undef CONFIG_CMD_IMLS


            #define CONFIG_CMD_PING

            
            #define CONFIG_CMD_DHCP

            
            #define CONFIG_CMD_NAND

            
            #define CONFIG_CMD_USB

            
            #define CONFIG_CMD_I2C

            
            #define CONFIG_CMD_DATE


            /* LED */

            
            #define CONFIG_AT91_LED


            /*

            
             * SDRAM: 1 bank, min 32, max 128 MB

            
             * Initialized before u-boot gets started.

            
             */

            
            #define CONFIG_NR_DRAM_BANKS		1

            
            #define CONFIG_SYS_SDRAM_BASE		0x20000000 /* ATMEL_BASE_CS1 */

            
            #define CONFIG_SYS_SDRAM_SIZE		0x04000000


            #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x00100000)

            
            #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01E00000)

            
            #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x00100000)


            /*

            
             * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,

            
             * leaving the correct space for initial global data structure above

            
             * that address while providing maximum stack area below.

            
             */

            
            #define CONFIG_SYS_INIT_SP_ADDR \

            
            	(ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE)


            /* DataFlash */

            
            #ifdef CONFIG_SYS_USE_DATAFLASH

            
            # define CONFIG_ATMEL_DATAFLASH_SPI

            
            # define CONFIG_HAS_DATAFLASH

            
            # define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)

            
            # define CONFIG_SYS_MAX_DATAFLASH_BANKS		1

            
            # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */

            
            # define AT91_SPI_CLK				15000000

            
            # define DATAFLASH_TCSS				(0x1a << 16)

            
            # define DATAFLASH_TCHS				(0x1 << 24)

            
            #endif


            /* NOR flash is not populated, disable it */

            
            #define CONFIG_SYS_NO_FLASH


            /* NAND flash */

            
            #ifdef CONFIG_CMD_NAND

            
            # define CONFIG_NAND_ATMEL

            
            # define CONFIG_SYS_MAX_NAND_DEVICE		1

            
            # define CONFIG_SYS_NAND_BASE			0x40000000 /* ATMEL_BASE_CS3 */

            
            # define CONFIG_SYS_NAND_DBW_8

            
            # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)

            
            # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)

            
            # define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15

            
            # define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22

            
            #endif


            /* Ethernet */

            
            #define CONFIG_MACB

            
            #define CONFIG_RMII

            
            #define CONFIG_FIT

            
            #define CONFIG_NET_RETRY_COUNT			20

            
            #undef CONFIG_RESET_PHY_R


            /* USB */

            
            #define CONFIG_USB_ATMEL

            
            #define CONFIG_USB_OHCI_NEW

            
            #define CONFIG_DOS_PARTITION

            
            #define CONFIG_SYS_USB_OHCI_CPU_INIT

            
            #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000

            
            #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"

            
            #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2

            
            #define CONFIG_USB_STORAGE

            
            #define CONFIG_CMD_FAT


            /* CAN */

            
            #define CONFIG_AT91_CAN


            /* hw-controller addresses */

            
            #define CONFIG_ET1100_BASE		0x70000000 /* ATMEL_BASE_CS6 */


            #ifdef CONFIG_SYS_USE_DATAFLASH


            /* bootstrap + u-boot + env in dataflash on CS0 */

            
            # define CONFIG_ENV_IS_IN_DATAFLASH

            
            # define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \

            
            					0x8400)

            
            # define CONFIG_ENV_OFFSET		0x4200

            
            # define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \

            
            					CONFIG_ENV_OFFSET)

            
            # define CONFIG_ENV_SIZE		0x4200


            #elif CONFIG_SYS_USE_NANDFLASH


            /* bootstrap + u-boot + env + linux in nandflash */

            
            # define CONFIG_ENV_IS_IN_NAND		1

            
            # define CONFIG_ENV_OFFSET		0xC0000

            
            # define CONFIG_ENV_SIZE		0x20000


            #endif


            #define CONFIG_SYS_PROMPT		"=> "

            
            #define CONFIG_SYS_CBSIZE		512

            
            #define CONFIG_SYS_MAXARGS		16

            
            #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \

            
            					sizeof(CONFIG_SYS_PROMPT) + 16)

            
            #define CONFIG_SYS_LONGHELP

            
            #define CONFIG_CMDLINE_EDITING


            /*

            
             * Size of malloc() pool

            
             */

            
            #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + \

            
            					128*1024, 0x1000)


            #endif
	/*
	* (C) Copyright 2010-2011
	* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
	* esd electronic system design gmbh <www.esd.eu>
	*
	* (C) Copyright 2007-2008
	* Stelian Pop <stelian@popies.net>
	* Lead Tech Design <www.leadtechdesign.com>
	*
	* Configuation settings for the esd OTC570 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* SoC must be defined first, before hardware.h is included.
	* In this case SoC is defined in boards.cfg.
	*/
	#include <asm/hardware.h>

	/*
	* Warning: changing CONFIG_SYS_TEXT_BASE requires
	* adapting the initial boot program.
	* Since the linker has to swallow that define, we must use a pure
	* hex number here!
	*/
	#define CONFIG_SYS_TEXT_BASE 0x20002000

	/*
	* since a number of boards are not being listed in linux
	* arch/arm/tools/mach-types any more, the mach-types have to be
	* defined here
	*/
	#define MACH_TYPE_OTC570 2166

	/* ARM asynchronous clock */
	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */
	#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
	#define CONFIG_SYS_HZ 1000 /* decrementer freq */

	/* Misc CPU related */
	#define CONFIG_SKIP_LOWLEVEL_INIT
	#define CONFIG_ARCH_CPU_INIT
	#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_SERIAL_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	#define CONFIG_MISC_INIT_R /* Call misc_init_r */

	#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */
	#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */
	#define CONFIG_PREBOOT /* enable preboot variable */

	/*
	* Hardware drivers
	*/

	/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */
	#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP

	/* general purpose I/O */
	#define CONFIG_AT91_GPIO

	/* Console output */
	#define CONFIG_ATMEL_USART
	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	#define CONFIG_USART_ID ATMEL_ID_SYS
	#define CONFIG_BAUDRATE 115200

	#define CONFIG_BOOTDELAY 3
	#define CONFIG_ZERO_BOOTDELAY_CHECK

	/* LCD */
	#define CONFIG_LCD
	#undef CONFIG_SPLASH_SCREEN

	#ifdef CONFIG_LCD
	# define LCD_BPP LCD_COLOR8

	# ifndef CONFIG_SPLASH_SCREEN
	# define CONFIG_LCD_LOGO
	# define CONFIG_LCD_INFO
	# undef CONFIG_LCD_INFO_BELOW_LOGO
	# endif /* CONFIG_SPLASH_SCREEN */

	# undef LCD_TEST_PATTERN
	# define CONFIG_SYS_WHITE_ON_BLACK
	# define CONFIG_ATMEL_LCD
	# define CONFIG_SYS_CONSOLE_IS_IN_ENV
	# define CONFIG_OTC570_LCD_BASE (CONFIG_SYS_SDRAM_BASE + 0x03fa5000)
	# define CONFIG_CMD_BMP
	#endif /* CONFIG_LCD */

	/* RTC and I2C stuff */
	#define CONFIG_RTC_DS1338
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#undef CONFIG_HARD_I2C
	#define CONFIG_SOFT_I2C
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SLAVE 0x7F

	#ifdef CONFIG_SOFT_I2C
	# define CONFIG_I2C_CMD_TREE
	# define CONFIG_I2C_MULTI_BUS
	/* Configure data and clock pins for pio */
	# define I2C_INIT { \
	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
	at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \
	}
	# define I2C_SOFT_DECLARATIONS
	/* Configure data pin as output */
	# define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTB, 4, 0)
	/* Configure data pin as input */
	# define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTB, 4, 0)
	/* Read data pin */
	# define I2C_READ at91_get_pio_value(AT91_PIO_PORTB, 4)
	/* Set data pin */
	# define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTB, 4, bit)
	/* Set clock pin */
	# define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
	# define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
	#endif /* CONFIG_SOFT_I2C */

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>
	#undef CONFIG_CMD_FPGA
	#undef CONFIG_CMD_LOADS
	#undef CONFIG_CMD_IMLS

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_USB
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_DATE

	/* LED */
	#define CONFIG_AT91_LED

	/*
	* SDRAM: 1 bank, min 32, max 128 MB
	* Initialized before u-boot gets started.
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */
	#define CONFIG_SYS_SDRAM_SIZE 0x04000000

	#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000)
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000)
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000)

	/*
	* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
	* leaving the correct space for initial global data structure above
	* that address while providing maximum stack area below.
	*/
	#define CONFIG_SYS_INIT_SP_ADDR \
	(ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE)

	/* DataFlash */
	#ifdef CONFIG_SYS_USE_DATAFLASH
	# define CONFIG_ATMEL_DATAFLASH_SPI
	# define CONFIG_HAS_DATAFLASH
	# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
	# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
	# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
	# define AT91_SPI_CLK 15000000
	# define DATAFLASH_TCSS (0x1a << 16)
	# define DATAFLASH_TCHS (0x1 << 24)
	#endif

	/* NOR flash is not populated, disable it */
	#define CONFIG_SYS_NO_FLASH

	/* NAND flash */
	#ifdef CONFIG_CMD_NAND
	# define CONFIG_NAND_ATMEL
	# define CONFIG_SYS_MAX_NAND_DEVICE 1
	# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */
	# define CONFIG_SYS_NAND_DBW_8
	# define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
	# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
	# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
	#endif

	/* Ethernet */
	#define CONFIG_MACB
	#define CONFIG_RMII
	#define CONFIG_FIT
	#define CONFIG_NET_RETRY_COUNT 20
	#undef CONFIG_RESET_PHY_R

	/* USB */
	#define CONFIG_USB_ATMEL
	#define CONFIG_USB_OHCI_NEW
	#define CONFIG_DOS_PARTITION
	#define CONFIG_SYS_USB_OHCI_CPU_INIT
	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
	#define CONFIG_USB_STORAGE
	#define CONFIG_CMD_FAT

	/* CAN */
	#define CONFIG_AT91_CAN

	/* hw-controller addresses */
	#define CONFIG_ET1100_BASE 0x70000000 /* ATMEL_BASE_CS6 */

	#ifdef CONFIG_SYS_USE_DATAFLASH

	/* bootstrap + u-boot + env in dataflash on CS0 */
	# define CONFIG_ENV_IS_IN_DATAFLASH
	# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
	0x8400)
	# define CONFIG_ENV_OFFSET 0x4200
	# define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
	CONFIG_ENV_OFFSET)
	# define CONFIG_ENV_SIZE 0x4200

	#elif CONFIG_SYS_USE_NANDFLASH

	/* bootstrap + u-boot + env + linux in nandflash */
	# define CONFIG_ENV_IS_IN_NAND 1
	# define CONFIG_ENV_OFFSET 0xC0000
	# define CONFIG_ENV_SIZE 0x20000

	#endif

	#define CONFIG_SYS_PROMPT "=> "
	#define CONFIG_SYS_CBSIZE 512
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_CMDLINE_EDITING

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
	128*1024, 0x1000)

	#endif