| /* | |
| * (C) Copyright 2010,2011 | |
| * NVIDIA Corporation <www.nvidia.com> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| #include <asm/sizes.h> | |
| /* LP0 suspend / resume */ | |
| #define CONFIG_TEGRA20_LP0 | |
| #define CONFIG_AES | |
| #define CONFIG_TEGRA_PMU | |
| #define CONFIG_TPS6586X_POWER | |
| #define CONFIG_TEGRA_CLOCK_SCALING | |
| #include "tegra20-common.h" | |
| /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ | |
| #define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard | |
| #define CONFIG_OF_CONTROL | |
| #define CONFIG_OF_SEPARATE | |
| /* High-level configuration options */ | |
| #define V_PROMPT "Tegra20 (SeaBoard) # " | |
| #define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Seaboard" | |
| /* Board-specific serial config */ | |
| #define CONFIG_SERIAL_MULTI | |
| #define CONFIG_TEGRA20_ENABLE_UARTD | |
| #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE | |
| /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ | |
| #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 | |
| #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD | |
| #define CONFIG_BOARD_EARLY_INIT_F | |
| /* I2C */ | |
| #define CONFIG_TEGRA_I2C | |
| #define CONFIG_SYS_I2C_INIT_BOARD | |
| #define CONFIG_I2C_MULTI_BUS | |
| #define CONFIG_SYS_MAX_I2C_BUS 4 | |
| #define CONFIG_SYS_I2C_SPEED 100000 | |
| #define CONFIG_CMD_I2C | |
| /* SD/MMC */ | |
| #define CONFIG_MMC | |
| #define CONFIG_GENERIC_MMC | |
| #define CONFIG_TEGRA_MMC | |
| #define CONFIG_CMD_MMC | |
| #define CONFIG_DOS_PARTITION | |
| #define CONFIG_EFI_PARTITION | |
| #define CONFIG_CMD_EXT2 | |
| #define CONFIG_CMD_FAT | |
| /* Environment in eMMC, at the end of 2nd "boot sector" */ | |
| #define CONFIG_ENV_IS_IN_MMC | |
| #define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) | |
| #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| #define CONFIG_SYS_MMC_ENV_PART 2 | |
| /* USB Host support */ | |
| #define CONFIG_USB_EHCI | |
| #define CONFIG_USB_EHCI_TEGRA | |
| #define CONFIG_USB_STORAGE | |
| #define CONFIG_CMD_USB | |
| /* USB networking support */ | |
| #define CONFIG_USB_HOST_ETHER | |
| #define CONFIG_USB_ETHER_ASIX | |
| /* General networking support */ | |
| #define CONFIG_CMD_NET | |
| #define CONFIG_CMD_DHCP | |
| /* Enable keyboard */ | |
| #define CONFIG_TEGRA20_KEYBOARD | |
| #define CONFIG_KEYBOARD | |
| #undef TEGRA20_DEVICE_SETTINGS | |
| #define TEGRA20_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ | |
| "stdout=serial\0" \ | |
| "stderr=serial\0" | |
| #include "tegra20-common-post.h" | |
| #endif /* __CONFIG_H */ |