| /* | |
| * (C) Copyright 2006-2008 | |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. | |
| * | |
| * (C) Copyright 2006 | |
| * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com | |
| * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /* | |
| * sequoia.h - configuration for Sequoia & Rainier boards | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| /* | |
| * High Level Configuration Options | |
| */ | |
| /* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ | |
| #ifndef CONFIG_RAINIER | |
| #define CONFIG_440EPX 1 /* Specific PPC440EPx */ | |
| #define CONFIG_HOSTNAME sequoia | |
| #else | |
| #define CONFIG_440GRX 1 /* Specific PPC440GRx */ | |
| #define CONFIG_HOSTNAME rainier | |
| #endif | |
| #define CONFIG_440 1 /* ... PPC440 family */ | |
| #define CONFIG_4xx 1 /* ... PPC4xx family */ | |
| #ifndef CONFIG_SYS_TEXT_BASE | |
| #define CONFIG_SYS_TEXT_BASE 0xFFF80000 | |
| #endif | |
| /* | |
| * Include common defines/options for all AMCC eval boards | |
| */ | |
| #include "amcc-common.h" | |
| /* Detect Sequoia PLL input clock automatically via CPLD bit */ | |
| #define CONFIG_SYS_CLK_FREQ ((in8(CONFIG_SYS_BCSR_BASE + 3) & 0x80) ? \ | |
| 33333333 : 33000000) | |
| /* | |
| * Define this if you want support for video console with radeon 9200 pci card | |
| * Also set CONFIG_SYS_TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case | |
| */ | |
| #undef CONFIG_VIDEO | |
| #ifdef CONFIG_VIDEO | |
| /* | |
| * 44x dcache supported is working now on sequoia, but we don't enable | |
| * it yet since it needs further testing | |
| */ | |
| #define CONFIG_4xx_DCACHE /* enable dcache */ | |
| #endif | |
| #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ | |
| #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ | |
| /* | |
| * Base addresses -- Note these are effective addresses where the actual | |
| * resources get mapped (not physical addresses). | |
| */ | |
| #define CONFIG_SYS_TLB_FOR_BOOT_FLASH 0x0003 | |
| #define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 | |
| #define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */ | |
| #define CONFIG_SYS_NAND_ADDR 0xd0000000 /* NAND Flash */ | |
| #define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */ | |
| #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE | |
| #define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ | |
| #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ | |
| #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 | |
| #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 | |
| #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 | |
| #define CONFIG_SYS_USB2D0_BASE 0xe0000100 | |
| #define CONFIG_SYS_USB_DEVICE 0xe0000000 | |
| #define CONFIG_SYS_USB_HOST 0xe0000400 | |
| #define CONFIG_SYS_BCSR_BASE 0xc0000000 | |
| /* | |
| * Initial RAM & stack pointer | |
| */ | |
| /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ | |
| #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ | |
| #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) | |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
| #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) | |
| /* | |
| * Serial Port | |
| */ | |
| #define CONFIG_CONS_INDEX 1 /* Use UART0 */ | |
| #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ | |
| /* | |
| * Environment | |
| */ | |
| #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) | |
| #define CONFIG_ENV_IS_IN_NAND /* use NAND for environ vars */ | |
| #define CONFIG_ENV_IS_EMBEDDED /* use embedded environment */ | |
| #elif defined(CONFIG_SYS_RAMBOOT) | |
| #define CONFIG_ENV_IS_NOWHERE /* Store env in memory only */ | |
| #define CONFIG_ENV_SIZE (8 << 10) | |
| /* | |
| * In RAM-booting version, we have no environment storage. So we need to | |
| * provide at least preliminary MAC addresses for the 4xx EMAC driver to | |
| * register the interfaces. Those two addresses are generated via the | |
| * tools/gen_eth_addr tool and should only be used in a closed laboratory | |
| * environment. | |
| */ | |
| #define CONFIG_ETHADDR 4a:56:49:22:3e:43 | |
| #define CONFIG_ETH1ADDR 02:93:53:d5:06:98 | |
| #else | |
| #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environ vars */ | |
| #endif | |
| #if defined(CONFIG_CMD_FLASH) | |
| /* | |
| * FLASH related | |
| */ | |
| #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ | |
| #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ | |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ | |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ | |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ | |
| #define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ | |
| #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ | |
| #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ | |
| #ifdef CONFIG_ENV_IS_IN_FLASH | |
| #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ | |
| #define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) | |
| #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ | |
| /* Address and size of Redundant Environment Sector */ | |
| #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) | |
| #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
| #endif | |
| #endif /* CONFIG_CMD_FLASH */ | |
| /* | |
| * IPL (Initial Program Loader, integrated inside CPU) | |
| * Will load first 4k from NAND (SPL) into cache and execute it from there. | |
| * | |
| * SPL (Secondary Program Loader) | |
| * Will load special U-Boot version (NUB) from NAND and execute it. This SPL | |
| * has to fit into 4kByte. It sets up the CPU and configures the SDRAM | |
| * controller and the NAND controller so that the special U-Boot image can be | |
| * loaded from NAND to SDRAM. | |
| * | |
| * NUB (NAND U-Boot) | |
| * This NAND U-Boot (NUB) is a special U-Boot version which can be started | |
| * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. | |
| * | |
| * On 440EPx the SPL is copied to SDRAM before the NAND controller is | |
| * set up. While still running from cache, I experienced problems accessing | |
| * the NAND controller. sr - 2006-08-25 | |
| */ | |
| #define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ | |
| #define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ | |
| #define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here */ | |
| #define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ | |
| #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from */ | |
| /* this addr */ | |
| #define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) | |
| /* | |
| * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) | |
| */ | |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ | |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ | |
| /* | |
| * Now the NAND chip has to be defined (no autodetection used!) | |
| */ | |
| #define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ | |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ | |
| #define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */ | |
| #define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ | |
| #undef CONFIG_SYS_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ | |
| #define CONFIG_SYS_NAND_ECCSIZE 256 | |
| #define CONFIG_SYS_NAND_ECCBYTES 3 | |
| #define CONFIG_SYS_NAND_OOBSIZE 16 | |
| #define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} | |
| #ifdef CONFIG_ENV_IS_IN_NAND | |
| /* | |
| * For NAND booting the environment is embedded in the U-Boot image. Please take | |
| * look at the file board/amcc/sequoia/u-boot-nand.lds for details. | |
| */ | |
| #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| #define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) | |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) | |
| #endif | |
| /* | |
| * DDR SDRAM | |
| */ | |
| #define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ | |
| #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) && \ | |
| !defined(CONFIG_SYS_RAMBOOT) | |
| #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ | |
| #endif | |
| #define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ | |
| /* 440EPx errata CHIP 11 */ | |
| /* | |
| * I2C | |
| */ | |
| #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ | |
| #define CONFIG_SYS_I2C_MULTI_EEPROMS | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 | |
| /* I2C bootstrap EEPROM */ | |
| #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 | |
| #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 | |
| #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 | |
| /* I2C SYSMON (LM75, AD7414 is almost compatible) */ | |
| #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ | |
| #define CONFIG_DTT_AD7414 1 /* use AD7414 */ | |
| #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ | |
| #define CONFIG_SYS_DTT_MAX_TEMP 70 | |
| #define CONFIG_SYS_DTT_LOW_TEMP -30 | |
| #define CONFIG_SYS_DTT_HYSTERESIS 3 | |
| /* | |
| * Default environment variables | |
| */ | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| CONFIG_AMCC_DEF_ENV \ | |
| CONFIG_AMCC_DEF_ENV_POWERPC \ | |
| CONFIG_AMCC_DEF_ENV_PPC_OLD \ | |
| CONFIG_AMCC_DEF_ENV_NOR_UPD \ | |
| CONFIG_AMCC_DEF_ENV_NAND_UPD \ | |
| "kernel_addr=FC000000\0" \ | |
| "ramdisk_addr=FC180000\0" \ | |
| "" | |
| #define CONFIG_M88E1111_PHY 1 | |
| #define CONFIG_IBM_EMAC4_V4 1 | |
| #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ | |
| #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ | |
| #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| #define CONFIG_HAS_ETH0 | |
| #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ | |
| #define CONFIG_PHY1_ADDR 1 | |
| /* USB */ | |
| #ifdef CONFIG_440EPX | |
| #undef CONFIG_USB_EHCI /* OHCI by default */ | |
| #ifdef CONFIG_USB_EHCI | |
| #define CONFIG_USB_EHCI_PPC4XX | |
| #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300 | |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| #define CONFIG_EHCI_MMIO_BIG_ENDIAN | |
| #define CONFIG_EHCI_DESC_BIG_ENDIAN | |
| #ifdef CONFIG_4xx_DCACHE | |
| #define CONFIG_EHCI_DCACHE | |
| #endif | |
| #else /* CONFIG_USB_EHCI */ | |
| #define CONFIG_USB_OHCI_NEW | |
| #define CONFIG_SYS_OHCI_BE_CONTROLLER | |
| #undef CONFIG_SYS_USB_OHCI_BOARD_INIT | |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 | |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE CONFIG_SYS_USB_HOST | |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440" | |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 | |
| #endif | |
| #define CONFIG_USB_STORAGE | |
| /* Comment this out to enable USB 1.1 device */ | |
| #define USB_2_0_DEVICE | |
| #endif /* CONFIG_440EPX */ | |
| /* Partitions */ | |
| #define CONFIG_MAC_PARTITION | |
| #define CONFIG_DOS_PARTITION | |
| #define CONFIG_ISO_PARTITION | |
| /* | |
| * Commands additional to the ones defined in amcc-common.h | |
| */ | |
| #define CONFIG_CMD_CHIP_CONFIG | |
| #define CONFIG_CMD_DTT | |
| #define CONFIG_CMD_FAT | |
| #define CONFIG_CMD_NAND | |
| #define CONFIG_CMD_PCI | |
| #define CONFIG_CMD_SDRAM | |
| #ifdef CONFIG_440EPX | |
| #define CONFIG_CMD_USB | |
| #endif | |
| #ifndef CONFIG_RAINIER | |
| #define CONFIG_SYS_POST_FPU_ON CONFIG_SYS_POST_FPU | |
| #else | |
| #define CONFIG_SYS_POST_FPU_ON 0 | |
| #endif | |
| /* | |
| * Don't run the memory POST on the NAND-booting version. It will | |
| * overwrite part of the U-Boot image which is already loaded from NAND | |
| * to SDRAM. | |
| */ | |
| #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT) | |
| #define CONFIG_SYS_POST_MEMORY_ON 0 | |
| #else | |
| #define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY | |
| #endif | |
| /* POST support */ | |
| #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ | |
| CONFIG_SYS_POST_CPU | \ | |
| CONFIG_SYS_POST_ETHER | \ | |
| CONFIG_SYS_POST_FPU_ON | \ | |
| CONFIG_SYS_POST_I2C | \ | |
| CONFIG_SYS_POST_MEMORY_ON | \ | |
| CONFIG_SYS_POST_SPR | \ | |
| CONFIG_SYS_POST_UART) | |
| #define CONFIG_LOGBUFFER | |
| #define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ | |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ | |
| #define CONFIG_SUPPORT_VFAT | |
| /* | |
| * PCI stuff | |
| */ | |
| /* General PCI */ | |
| #define CONFIG_PCI /* include pci support */ | |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ | |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */ | |
| /* CONFIG_SYS_PCI_MEMBASE */ | |
| /* Board-specific PCI */ | |
| #define CONFIG_SYS_PCI_TARGET_INIT | |
| #define CONFIG_SYS_PCI_MASTER_INIT | |
| #define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ | |
| #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ | |
| #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ | |
| /* | |
| * External Bus Controller (EBC) Setup | |
| */ | |
| /* | |
| * On Sequoia CS0 and CS3 are switched when configuring for NAND booting | |
| */ | |
| #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) && \ | |
| !defined(CONFIG_SYS_RAMBOOT) | |
| #define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */ | |
| /* Memory Bank 0 (NOR-FLASH) initialization */ | |
| #define CONFIG_SYS_EBC_PB0AP 0x03017200 | |
| #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xda000) | |
| /* Memory Bank 3 (NAND-FLASH) initialization */ | |
| #define CONFIG_SYS_EBC_PB3AP 0x018003c0 | |
| #define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_NAND_ADDR | 0x1c000) | |
| #else | |
| #define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ | |
| /* Memory Bank 3 (NOR-FLASH) initialization */ | |
| #define CONFIG_SYS_EBC_PB3AP 0x03017200 | |
| #define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_FLASH_BASE | 0xda000) | |
| /* Memory Bank 0 (NAND-FLASH) initialization */ | |
| #define CONFIG_SYS_EBC_PB0AP 0x018003c0 | |
| #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000) | |
| #endif | |
| /* Memory Bank 2 (CPLD) initialization */ | |
| #define CONFIG_SYS_EBC_PB2AP 0x24814580 | |
| #define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_BCSR_BASE | 0x38000) | |
| #define CONFIG_SYS_BCSR5_PCI66EN 0x80 | |
| /* | |
| * NAND FLASH | |
| */ | |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) | |
| #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ | |
| /* | |
| * PPC440 GPIO Configuration | |
| */ | |
| /* test-only: take GPIO init from pcs440ep ???? in config file */ | |
| #define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ | |
| { \ | |
| /* GPIO Core 0 */ \ | |
| {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ | |
| {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28 USB2D_TXVALID */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ | |
| }, \ | |
| { \ | |
| /* GPIO Core 1 */ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_8PIN_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_CTS_N EBC_DATA(0) UART3_SIN*/ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_8PIN_DTR_N UART1_SOUT */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_8PIN_RI_N UART1_SIN */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ | |
| } \ | |
| } | |
| #ifdef CONFIG_VIDEO | |
| #define CONFIG_BIOSEMU /* x86 bios emulator for vga bios */ | |
| #define CONFIG_ATI_RADEON_FB /* use radeon framebuffer driver */ | |
| #define VIDEO_IO_OFFSET 0xe8000000 | |
| #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET | |
| #define CONFIG_VIDEO_SW_CURSOR | |
| #define CONFIG_VIDEO_LOGO | |
| #define CONFIG_CFB_CONSOLE | |
| #define CONFIG_SPLASH_SCREEN | |
| #define CONFIG_VGA_AS_SINGLE_DEVICE | |
| #define CONFIG_CMD_BMP | |
| #endif | |
| #endif /* __CONFIG_H */ |