include/configs/uc100.h - u-boot - Git at Google


            
            /*

            
             * (C) Copyright 2000-2005

            
             * Wolfgang Denk, DENX Software Engineering, wd@denx.de.

            
             *

            
             * See file CREDITS for list of people who contributed to this

            
             * project.

            
             *

            
             * This program is free software; you can redistribute it and/or

            
             * modify it under the terms of the GNU General Public License as

            
             * published by the Free Software Foundation; either version 2 of

            
             * the License, or (at your option) any later version.

            
             *

            
             * This program is distributed in the hope that it will be useful,

            
             * but WITHOUT ANY WARRANTY; without even the implied warranty of

            
             * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

            
             * GNU General Public License for more details.

            
             *

            
             * You should have received a copy of the GNU General Public License

            
             * along with this program; if not, write to the Free Software

            
             * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

            
             * MA 02111-1307 USA

            
             */


            /*

            
             * board/config.h - configuration options, board specific

            
             */


            #ifndef __CONFIG_H

            
            #define __CONFIG_H


            /*

            
             * High Level Configuration Options

            
             * (easy to change)

            
             */


            #define CONFIG_MPC860		1

            
            #define CONFIG_MPC860T		1

            
            #define CONFIG_MPC862		1       /* enable 862 since the         */

            
            #define CONFIG_MPC857		1       /* 857 is a variant of the 862  */


            #define CONFIG_UC100		1	/* ...on a UC100 module	        */


            #define	CONFIG_SYS_TEXT_BASE	0x40700000


            #define MPC8XX_FACT		4		/* Multiply by 4	*/

            
            #define MPC8XX_XIN		25000000	/* 25.0 MHz in		*/

            
            #define CONFIG_8xx_GCLK_FREQ	(MPC8XX_FACT * MPC8XX_XIN)

            
            				    /* define if cant' use get_gclk_freq */


            #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/

            
            #undef	CONFIG_8xx_CONS_SMC2

            
            #undef	CONFIG_8xx_CONS_NONE


            #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/


            #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/


            #define	CONFIG_BOOTCOUNT_LIMIT


            #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/


            #define CONFIG_BOARD_TYPES	1	/* support board types		*/


            #define CONFIG_PREBOOT	"echo;"	\

            
            	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \

            
            	"echo"


            #undef	CONFIG_BOOTARGS


            #define	CONFIG_EXTRA_ENV_SETTINGS					\

            
            	"netdev=eth0\0"							\

            
            	"nfsargs=setenv bootargs root=/dev/nfs rw "			\

            
            		"nfsroot=${serverip}:${rootpath}\0"			\

            
            	"ramargs=setenv bootargs root=/dev/ram rw\0"			\

            
            	"addip=setenv bootargs ${bootargs} "				\

            
            		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\

            
            		":${hostname}:${netdev}:off panic=1\0"			\

            
            	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\

            
            	"flash_nfs=run nfsargs addip addtty;"				\

            
            		"bootm ${kernel_addr}\0"				\

            
            	"flash_self=run ramargs addip addtty;"				\

            
            		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\

            
            	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \

            
            	        "bootm\0"						\

            
            	"rootpath=/opt/eldk/ppc_8xx\0"					\

            
            	"bootfile=/tftpboot/uc100/uImage\0"				\

            
            	"kernel_addr=40000000\0"					\

            
            	"ramdisk_addr=40100000\0"					\

            
            	"load=tftp 100000 /tftpboot/uc100/u-boot.bin\0"			\

            
            	"update=protect off 40700000 4073ffff;era 40700000 4073ffff;"	\

            
            		"cp.b 100000 40700000 ${filesize};"			\

            
            		"setenv filesize;saveenv\0"				\

            
            	""

            
            #define CONFIG_BOOTCOMMAND	"run flash_self"


            #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/

            
            #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/


            #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/


            #undef CONFIG_STATUS_LED                /* no status-led                */


            /*

            
             * BOOTP options

            
             */

            
            #define CONFIG_BOOTP_SUBNETMASK

            
            #define CONFIG_BOOTP_GATEWAY

            
            #define CONFIG_BOOTP_HOSTNAME

            
            #define CONFIG_BOOTP_BOOTPATH

            
            #define CONFIG_BOOTP_BOOTFILESIZE


            #define CONFIG_MAC_PARTITION

            
            #define CONFIG_DOS_PARTITION


            #undef CONFIG_RTC_MPC8xx

            
            #define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* PCF8563 RTC			*/

            
            #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/


            /*

            
             * Power On Self Test support

            
             */

            
            #define CONFIG_POST	      ( CONFIG_SYS_POST_CACHE		| \

            
            				CONFIG_SYS_POST_MEMORY		| \

            
            				CONFIG_SYS_POST_CPU		| \

            
            				CONFIG_SYS_POST_UART		| \

            
            				CONFIG_SYS_POST_SPR )

            
            #undef  CONFIG_POST


            /*

            
             * Command line configuration.

            
             */

            
            #include <config_cmd_default.h>


            #define CONFIG_CMD_ASKENV

            
            #define CONFIG_CMD_DATE

            
            #define CONFIG_CMD_DHCP

            
            #define CONFIG_CMD_EEPROM

            
            #define CONFIG_CMD_ELF

            
            #define CONFIG_CMD_FAT

            
            #define CONFIG_CMD_I2C

            
            #define CONFIG_CMD_IDE

            
            #define CONFIG_CMD_MII

            
            #define CONFIG_CMD_NFS

            
            #define CONFIG_CMD_PING

            
            #define CONFIG_CMD_SNTP


            #ifdef CONFIG_POST

            
            #define CONFIG_CMD_DIAG

            
            #endif


            #define CONFIG_NETCONSOLE


            /*

            
             * Miscellaneous configurable options

            
             */

            
            #define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/

            
            #define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/


            #if 0

            
            #define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/

            
            #endif


            #if defined(CONFIG_CMD_KGDB)

            
            #define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/

            
            #else

            
            #define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/

            
            #endif

            
            #define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

            
            #define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/

            
            #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/


            #define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/

            
            #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/


            #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/


            #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/


            #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */


            /*

            
             * Low Level Configuration Settings

            
             * (address mappings, register initial values, etc.)

            
             * You should know what you are doing if you make changes here.

            
             */

            
            /*-----------------------------------------------------------------------

            
             * Internal Memory Mapped Register

            
             */

            
            #define CONFIG_SYS_IMMR		0xF0000000


            /*-----------------------------------------------------------------------

            
             * Definitions for initial stack pointer and data area (in DPRAM)

            
             */

            
            #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR

            
            #define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/

            
            #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

            
            #define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET


            /*-----------------------------------------------------------------------

            
             * Start addresses for the final memory configuration

            
             * (Set up by the startup code)

            
             * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0

            
             */

            
            #define	CONFIG_SYS_SDRAM_BASE		0x00000000

            
            #define CONFIG_SYS_FLASH_BASE		0x40000000

            
            #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/

            
            #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE+0x00700000) /* resetvec fff00100*/

            
            #define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/


            /*-----------------------------------------------------------------------

            
             * Address accessed to reset the board - must not be mapped/assigned

            
             */

            
            #define CONFIG_SYS_RESET_ADDRESS       0x90000000


            /*

            
             * For booting Linux, the board info and command line data

            
             * have to be in the first 8 MB of memory, since this is

            
             * the maximum mapped by the Linux kernel during initialization.

            
             */

            
            #define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/


            /*-----------------------------------------------------------------------

            
             * FLASH organization

            
             */

            
            #define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */

            
            #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */

            
            #define CONFIG_SYS_FLASH_CFI_AMD_RESET	1		/* AMD RESET for STM 29W320DB!  */


            #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/

            
            #define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/


            #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/

            
            #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/


            #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */


            #define	CONFIG_ENV_IS_IN_FLASH	1

            
            #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)

            
            #define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/

            
            #define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/


            /* Address and size of Redundant Environment Sector	*/

            
            #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)

            
            #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)


            /*-----------------------------------------------------------------------

            
             * Cache Configuration

            
             */

            
            #define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/

            
            #if defined(CONFIG_CMD_KGDB)

            
            #define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/

            
            #endif


            /*-----------------------------------------------------------------------

            
             * SYPCR - System Protection Control				11-9

            
             * SYPCR can only be written once after reset!

            
             *-----------------------------------------------------------------------

            
             * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze

            
             */

            
            #if defined(CONFIG_WATCHDOG)

            
            #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \

            
            			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)

            
            #else

            
            #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)

            
            #endif


            /*-----------------------------------------------------------------------

            
             * SIUMCR - SIU Module Configuration				11-6

            
             *-----------------------------------------------------------------------

            
             * PCMCIA config., multi-function pin tri-state

            
             */

            
            #define CONFIG_SYS_SIUMCR	(SIUMCR_FRC | SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)


            /*-----------------------------------------------------------------------

            
             * TBSCR - Time Base Status and Control				11-26

            
             *-----------------------------------------------------------------------

            
             * Clear Reference Interrupt Status, Timebase freezing enabled

            
             */

            
            #define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)


            /*-----------------------------------------------------------------------

            
             * RTCSC - Real-Time Clock Status and Control Register		11-27

            
             *-----------------------------------------------------------------------

            
             */

            
            #define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)


            /*-----------------------------------------------------------------------

            
             * PISCR - Periodic Interrupt Status and Control		11-31

            
             *-----------------------------------------------------------------------

            
             * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled

            
             */

            
            #define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)


            /*-----------------------------------------------------------------------

            
             * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30

            
             *-----------------------------------------------------------------------

            
             * Reset PLL lock status sticky bit, timer expired status bit and timer

            
             * interrupt status bit

            
             */

            
            #define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\

            
            				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)


            /*-----------------------------------------------------------------------

            
             * SCCR - System Clock and reset Control Register		15-27

            
             *-----------------------------------------------------------------------

            
             * Set clock output, timebase and RTC source and divider,

            
             * power management and some other internal clocks

            
             */

            
            #define SCCR_MASK	0x00000000

            
            #define CONFIG_SYS_SCCR        (SCCR_EBDF11)


            /*-----------------------------------------------------------------------

            
             * PCMCIA stuff

            
             *-----------------------------------------------------------------------

            
             *

            
             */

            
            #define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)

            
            #define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )

            
            #define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)

            
            #define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )

            
            #define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)

            
            #define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )

            
            #define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)

            
            #define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )


            /*-----------------------------------------------------------------------

            
             * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)

            
             *-----------------------------------------------------------------------

            
             */


            #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/


            #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/

            
            #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/

            
            #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/


            #define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/

            
            #define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/


            #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000


            #define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR


            /* Offset for data I/O			*/

            
            #define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)


            /* Offset for normal register accesses	*/

            
            #define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)


            /* Offset for alternate registers	*/

            
            #define CONFIG_SYS_ATA_ALT_OFFSET	0x0100


            /*-----------------------------------------------------------------------

            
             *

            
             *-----------------------------------------------------------------------

            
             *

            
             */

            
            #define CONFIG_SYS_DER	0


            /*

            
             * Init Memory Controller:

            
             *

            
             * BR0/1 and OR0/1 (FLASH)

            
             */


            #define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/

            
            #define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/


            /* used to re-map FLASH both when starting from SRAM or FLASH:

            
             * restrict access enough to keep SRAM working (if any)

            
             * but not too much to meddle with FLASH accesses

            
             */

            
            #define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */

            
            #define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */


            /*

            
             * FLASH timing:

            
             */

            
            #define CONFIG_SYS_OR_TIMING_FLASH	(0x00000d24)


            #define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)

            
            #define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)

            
            #define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )


            #define CONFIG_SYS_BR1_PRELIM  0x00000081  /* Chip select for SDRAM (32 Bit, UPMA) */

            
            #define CONFIG_SYS_OR1_PRELIM  0xfc000a00

            
            #define CONFIG_SYS_BR2_PRELIM  0x80000001  /* Chip select for SRAM (32 Bit, GPCM) */

            
            #define CONFIG_SYS_OR2_PRELIM  0xfff00d24

            
            #define CONFIG_SYS_BR3_PRELIM  0x80600401  /* Chip select for Display (8 Bit, GPCM) */

            
            #define CONFIG_SYS_OR3_PRELIM  0xffff8f44

            
            #define CONFIG_SYS_BR4_PRELIM  0xc05108c1  /* Chip select for Interbus MPM (16 Bit, UPMB) */

            
            #define CONFIG_SYS_OR4_PRELIM  0xffff0300

            
            #define CONFIG_SYS_BR5_PRELIM  0xc0500401  /* Chip select for Interbus Status (8 Bit, GPCM) */

            
            #define CONFIG_SYS_OR5_PRELIM  0xffff8db0


            /*

            
             * Memory Periodic Timer Prescaler

            
             *

            
             * The Divider for PTA (refresh timer) configuration is based on an

            
             * example SDRAM configuration (64 MBit, one bank). The adjustment to

            
             * the number of chip selects (NCS) and the actually needed refresh

            
             * rate is done by setting MPTPR.

            
             *

            
             * PTA is calculated from

            
             *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)

            
             *

            
             *	gclk	  CPU clock (not bus clock!)

            
             *	Trefresh  Refresh cycle * 4 (four word bursts used)

            
             *

            
             * 4096  Rows from SDRAM example configuration

            
             * 1000  factor s -> ms

            
             *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration

            
             *    4  Number of refresh cycles per period

            
             *   64  Refresh cycle in ms per number of rows

            
             * --------------------------------------------

            
             * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000

            
             *

            
             *  50 MHz =>  50.000.000 / Divider =  98

            
             *  66 Mhz =>  66.000.000 / Divider = 129

            
             *  80 Mhz =>  80.000.000 / Divider = 156

            
             * 100 Mhz => 100.000.000 / Divider = 195

            
             */


            #define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))

            
            #define CONFIG_SYS_MAMR_PTA	98


            /*

            
             * For 16 MBit, refresh rates could be 31.3 us

            
             * (= 64 ms / 2K = 125 / quad bursts).

            
             * For a simpler initialization, 15.6 us is used instead.

            
             *

            
             * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks

            
             * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank

            
             */

            
            #define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/

            
            #define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/


            /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/

            
            #define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/

            
            #define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/


            /*

            
             * MAMR settings for SDRAM

            
             */


            /* 8 column SDRAM */

            
            #define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\

            
            			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\

            
            			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)

            
            /* 9 column SDRAM */

            
            #define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\

            
            			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\

            
            			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


            #define	CONFIG_SYS_MAMR_VAL	0x30904114	/* for SDRAM */

            
            #define	CONFIG_SYS_MBMR_VAL	0xff001111	/* for Interbus-MPM */


            /*-----------------------------------------------------------------------

            
             * I2C stuff

            
             */


            /* enable I2C and select the hardware/software driver */

            
            #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/

            
            #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/


            #define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/

            
            #define CONFIG_SYS_I2C_SLAVE		0xFE


            #ifdef CONFIG_SOFT_I2C

            
            /*

            
             * Software (bit-bang) I2C driver configuration

            
             */

            
            #define PB_SCL		0x00000020	/* PB 26 */

            
            #define PB_SDA		0x00000010	/* PB 27 */


            #define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)

            
            #define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)

            
            #define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)

            
            #define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)

            
            #define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \

            
            			else    immr->im_cpm.cp_pbdat &= ~PB_SDA

            
            #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \

            
            			else    immr->im_cpm.cp_pbdat &= ~PB_SCL

            
            #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */

            
            #endif	/* CONFIG_SOFT_I2C */


            /*-----------------------------------------------------------------------

            
             * I2C EEPROM (24C164)

            
             */

            
            #define CONFIG_SYS_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/

            
            #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1

            
            #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/

            
            #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4


            #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */

            
            #define FEC_ENET

            
            #define CONFIG_MII

            
            #define CONFIG_MII_INIT		1

            
            #define CONFIG_SYS_DISCOVER_PHY	1


            #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2000-2005
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC860 1
	#define CONFIG_MPC860T 1
	#define CONFIG_MPC862 1 /* enable 862 since the */
	#define CONFIG_MPC857 1 /* 857 is a variant of the 862 */

	#define CONFIG_UC100 1 /* ...on a UC100 module */

	#define CONFIG_SYS_TEXT_BASE 0x40700000

	#define MPC8XX_FACT 4 /* Multiply by 4 */
	#define MPC8XX_XIN 25000000 /* 25.0 MHz in */
	#define CONFIG_8xx_GCLK_FREQ (MPC8XX_FACT * MPC8XX_XIN)
	/* define if cant' use get_gclk_freq */

	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	#undef CONFIG_8xx_CONS_SMC2
	#undef CONFIG_8xx_CONS_NONE

	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */

	#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */

	#define CONFIG_BOOTCOUNT_LIMIT

	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */

	#define CONFIG_BOARD_TYPES 1 /* support board types */

	#define CONFIG_PREBOOT "echo;" \
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

	#undef CONFIG_BOOTARGS

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off panic=1\0" \
	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
	"flash_nfs=run nfsargs addip addtty;" \
	"bootm ${kernel_addr}\0" \
	"flash_self=run ramargs addip addtty;" \
	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
	"bootm\0" \
	"rootpath=/opt/eldk/ppc_8xx\0" \
	"bootfile=/tftpboot/uc100/uImage\0" \
	"kernel_addr=40000000\0" \
	"ramdisk_addr=40100000\0" \
	"load=tftp 100000 /tftpboot/uc100/u-boot.bin\0" \
	"update=protect off 40700000 4073ffff;era 40700000 4073ffff;" \
	"cp.b 100000 40700000 ${filesize};" \
	"setenv filesize;saveenv\0" \
	""
	#define CONFIG_BOOTCOMMAND "run flash_self"

	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */

	#undef CONFIG_WATCHDOG /* watchdog disabled */

	#undef CONFIG_STATUS_LED /* no status-led */

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_BOOTFILESIZE


	#define CONFIG_MAC_PARTITION
	#define CONFIG_DOS_PARTITION

	#undef CONFIG_RTC_MPC8xx
	#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */
	#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */

	/*
	* Power On Self Test support
	*/
	#define CONFIG_POST ( CONFIG_SYS_POST_CACHE \| \
	CONFIG_SYS_POST_MEMORY \| \
	CONFIG_SYS_POST_CPU \| \
	CONFIG_SYS_POST_UART \| \
	CONFIG_SYS_POST_SPR )
	#undef CONFIG_POST


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_EEPROM
	#define CONFIG_CMD_ELF
	#define CONFIG_CMD_FAT
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_IDE
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NFS
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_SNTP

	#ifdef CONFIG_POST
	#define CONFIG_CMD_DIAG
	#endif


	#define CONFIG_NETCONSOLE

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */

	#if 0
	#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
	#endif

	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	*/
	/*-----------------------------------------------------------------------
	* Internal Memory Mapped Register
	*/
	#define CONFIG_SYS_IMMR 0xF0000000

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/
	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
	*/
	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_FLASH_BASE 0x40000000
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE+0x00700000) /* resetvec fff00100*/
	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */

	/*-----------------------------------------------------------------------
	* Address accessed to reset the board - must not be mapped/assigned
	*/
	#define CONFIG_SYS_RESET_ADDRESS 0x90000000

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */

	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
	#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */

	/* Address and size of Redundant Environment Sector */
	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control 11-9
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	*/
	#if defined(CONFIG_WATCHDOG)
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	#else
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	#endif

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration 11-6
	*-----------------------------------------------------------------------
	* PCMCIA config., multi-function pin tri-state
	*/
	#define CONFIG_SYS_SIUMCR (SIUMCR_FRC \| SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)

	/*-----------------------------------------------------------------------
	* TBSCR - Time Base Status and Control 11-26
	*-----------------------------------------------------------------------
	* Clear Reference Interrupt Status, Timebase freezing enabled
	*/
	#define CONFIG_SYS_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)

	/*-----------------------------------------------------------------------
	* RTCSC - Real-Time Clock Status and Control Register 11-27
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 11-31
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	*/
	#define CONFIG_SYS_PISCR (PISCR_PS \| PISCR_PITF)

	/*-----------------------------------------------------------------------
	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	*-----------------------------------------------------------------------
	* Reset PLL lock status sticky bit, timer expired status bit and timer
	* interrupt status bit
	*/
	#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) \| \
	PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock and reset Control Register 15-27
	*-----------------------------------------------------------------------
	* Set clock output, timebase and RTC source and divider,
	* power management and some other internal clocks
	*/
	#define SCCR_MASK 0x00000000
	#define CONFIG_SYS_SCCR (SCCR_EBDF11)

	/*-----------------------------------------------------------------------
	* PCMCIA stuff
	*-----------------------------------------------------------------------
	*
	*/
	#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
	#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
	#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
	#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
	#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
	#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
	#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
	#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )

	/*-----------------------------------------------------------------------
	* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
	*-----------------------------------------------------------------------
	*/

	#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */

	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	#undef CONFIG_IDE_LED /* LED for ide not supported */
	#undef CONFIG_IDE_RESET /* reset for ide not supported */

	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
	#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */

	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000

	#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR

	/* Offset for data I/O */
	#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)

	/* Offset for normal register accesses */
	#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)

	/* Offset for alternate registers */
	#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100

	/*-----------------------------------------------------------------------
	*
	*-----------------------------------------------------------------------
	*
	*/
	#define CONFIG_SYS_DER 0

	/*
	* Init Memory Controller:
	*
	* BR0/1 and OR0/1 (FLASH)
	*/

	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */

	/* used to re-map FLASH both when starting from SRAM or FLASH:
	* restrict access enough to keep SRAM working (if any)
	* but not too much to meddle with FLASH accesses
	*/
	#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
	#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */

	/*
	* FLASH timing:
	*/
	#define CONFIG_SYS_OR_TIMING_FLASH (0x00000d24)

	#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )

	#define CONFIG_SYS_BR1_PRELIM 0x00000081 /* Chip select for SDRAM (32 Bit, UPMA) */
	#define CONFIG_SYS_OR1_PRELIM 0xfc000a00
	#define CONFIG_SYS_BR2_PRELIM 0x80000001 /* Chip select for SRAM (32 Bit, GPCM) */
	#define CONFIG_SYS_OR2_PRELIM 0xfff00d24
	#define CONFIG_SYS_BR3_PRELIM 0x80600401 /* Chip select for Display (8 Bit, GPCM) */
	#define CONFIG_SYS_OR3_PRELIM 0xffff8f44
	#define CONFIG_SYS_BR4_PRELIM 0xc05108c1 /* Chip select for Interbus MPM (16 Bit, UPMB) */
	#define CONFIG_SYS_OR4_PRELIM 0xffff0300
	#define CONFIG_SYS_BR5_PRELIM 0xc0500401 /* Chip select for Interbus Status (8 Bit, GPCM) */
	#define CONFIG_SYS_OR5_PRELIM 0xffff8db0

	/*
	* Memory Periodic Timer Prescaler
	*
	* The Divider for PTA (refresh timer) configuration is based on an
	* example SDRAM configuration (64 MBit, one bank). The adjustment to
	* the number of chip selects (NCS) and the actually needed refresh
	* rate is done by setting MPTPR.
	*
	* PTA is calculated from
	* PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
	*
	* gclk CPU clock (not bus clock!)
	* Trefresh Refresh cycle * 4 (four word bursts used)
	*
	* 4096 Rows from SDRAM example configuration
	* 1000 factor s -> ms
	* 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
	* 4 Number of refresh cycles per period
	* 64 Refresh cycle in ms per number of rows
	* --------------------------------------------
	* Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
	*
	* 50 MHz => 50.000.000 / Divider = 98
	* 66 Mhz => 66.000.000 / Divider = 129
	* 80 Mhz => 80.000.000 / Divider = 156
	* 100 Mhz => 100.000.000 / Divider = 195
	*/

	#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
	#define CONFIG_SYS_MAMR_PTA 98

	/*
	* For 16 MBit, refresh rates could be 31.3 us
	* (= 64 ms / 2K = 125 / quad bursts).
	* For a simpler initialization, 15.6 us is used instead.
	*
	* #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
	* #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
	*/
	#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
	#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */

	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
	#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
	#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */

	/*
	* MAMR settings for SDRAM
	*/

	/* 8 column SDRAM */
	#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
	/* 9 column SDRAM */
	#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)

	#define CONFIG_SYS_MAMR_VAL 0x30904114 /* for SDRAM */
	#define CONFIG_SYS_MBMR_VAL 0xff001111 /* for Interbus-MPM */

	/*-----------------------------------------------------------------------
	* I2C stuff
	*/

	/* enable I2C and select the hardware/software driver */
	#undef CONFIG_HARD_I2C /* I2C with hardware support */
	#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */

	#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
	#define CONFIG_SYS_I2C_SLAVE 0xFE

	#ifdef CONFIG_SOFT_I2C
	/*
	* Software (bit-bang) I2C driver configuration
	*/
	#define PB_SCL 0x00000020 /* PB 26 */
	#define PB_SDA 0x00000010 /* PB 27 */

	#define I2C_INIT (immr->im_cpm.cp_pbdir \|= PB_SCL)
	#define I2C_ACTIVE (immr->im_cpm.cp_pbdir \|= PB_SDA)
	#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
	#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
	#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SDA; \
	else immr->im_cpm.cp_pbdat &= ~PB_SDA
	#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SCL; \
	else immr->im_cpm.cp_pbdat &= ~PB_SCL
	#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
	#endif /* CONFIG_SOFT_I2C */

	/*-----------------------------------------------------------------------
	* I2C EEPROM (24C164)
	*/
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* EEPROM AT24C164 */
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4

	#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
	#define FEC_ENET
	#define CONFIG_MII
	#define CONFIG_MII_INIT 1
	#define CONFIG_SYS_DISCOVER_PHY 1

	#endif /* __CONFIG_H */