| /* | |
| * (C) Copyright 2008 | |
| * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es | |
| * This work has been supported by: QTechnology http://qtec.com/ | |
| * | |
| * (C) Copyright 2008 | |
| * Georg Schardt <schardt@team-ctech.de> | |
| * | |
| * This program is free software: you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation, either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #ifndef __CONFIG_XLX_H | |
| #define __CONFIG_XLX_H | |
| /* | |
| #define DEBUG | |
| #define ET_DEBUG | |
| */ | |
| /*Mem Map*/ | |
| #define CONFIG_SYS_SDRAM_BASE 0x0 | |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| #define CONFIG_SYS_MONITOR_LEN (192 * 1024) | |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) | |
| /*Cmd*/ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_CMD_ASKENV | |
| #define CONFIG_CMD_CACHE | |
| #define CONFIG_CMD_DIAG | |
| #define CONFIG_CMD_ELF | |
| #define CONFIG_CMD_IRQ | |
| #define CONFIG_CMD_REGINFO | |
| #undef CONFIG_CMD_JFFS2 | |
| #undef CONFIG_CMD_MTDPARTS | |
| #undef CONFIG_CMD_SPI | |
| #undef CONFIG_CMD_I2C | |
| #undef CONFIG_CMD_DTT | |
| #undef CONFIG_CMD_NET | |
| #undef CONFIG_CMD_PING | |
| #undef CONFIG_CMD_DHCP | |
| #undef CONFIG_CMD_EEPROM | |
| #undef CONFIG_CMD_IMLS | |
| #undef CONFIG_CMD_NFS | |
| /*Misc*/ | |
| #define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */ | |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| #if defined(CONFIG_CMD_KGDB) | |
| #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ | |
| #else | |
| #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ | |
| #endif | |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ | |
| sizeof(CONFIG_SYS_PROMPT) + 16) | |
| #define CONFIG_SYS_MAXARGS 16 | |
| /* max number of command args */ | |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| /* Boot Argument Buffer Size */ | |
| #define CONFIG_SYS_MEMTEST_START 0x00400000 | |
| /* memtest works on */ | |
| #define CONFIG_SYS_MEMTEST_END 0x00C00000 | |
| /* 4 ... 12 MB in DRAM */ | |
| #define CONFIG_SYS_LOAD_ADDR 0x00400000 | |
| /* default load address */ | |
| #define CONFIG_SYS_EXTBDINFO 1 | |
| /* Extended board_into (bd_t) */ | |
| #define CONFIG_SYS_HZ 1000 | |
| /* decrementer freq: 1 ms ticks */ | |
| #define CONFIG_CMDLINE_EDITING /* add command line history */ | |
| #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| #define CONFIG_LOOPW /* enable loopw command */ | |
| #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ | |
| #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ | |
| #define CONFIG_VERSION_VARIABLE /* include version env variable */ | |
| #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ | |
| #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ | |
| #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) | |
| /* Initial Memory map for Linux */ | |
| /*Stack*/ | |
| #define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */ | |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ | |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ | |
| - GENERATED_GBL_DATA_SIZE) | |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| /*Speed*/ | |
| #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ | |
| /*Flash*/ | |
| #ifdef XPAR_FLASH_MEM0_BASEADDR | |
| #define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR | |
| #define CONFIG_SYS_FLASH_CFI 1 | |
| #define CONFIG_FLASH_CFI_DRIVER 1 | |
| #define CONFIG_SYS_FLASH_EMPTY_INFO 1 | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
| #define CONFIG_SYS_FLASH_PROTECTION | |
| #define CONFIG_CMD_JFFS2 | |
| #define CONFIG_CMD_MTDPARTS | |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ | |
| #define CONFIG_FLASH_CFI_MTD | |
| #else | |
| #define CONFIG_ENV_IS_NOWHERE | |
| #define CONFIG_SYS_NO_FLASH | |
| #endif | |
| /* serial communication */ | |
| #ifdef XPAR_UARTLITE_0_BASEADDR | |
| #define CONFIG_XILINX_UARTLITE | |
| #define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR | |
| #define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE | |
| #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } | |
| #else | |
| #ifdef XPAR_UARTNS550_0_BASEADDR | |
| #define CONFIG_SYS_NS16550 | |
| #define CONFIG_SYS_NS16550_SERIAL | |
| #define CONFIG_SYS_NS16550_REG_SIZE 4 | |
| #define CONFIG_CONS_INDEX 1 | |
| #define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR | |
| #define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ | |
| #define CONFIG_BAUDRATE 115200 | |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } | |
| #endif | |
| #endif | |
| #endif /* __CONFIG_H */ |