| /* | |
| * (C) Copyright 2009 | |
| * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #ifndef __DW_UDC_H | |
| #define __DW_UDC_H | |
| /* | |
| * Defines for USBD | |
| * | |
| * The udc_ahb controller has three AHB slaves: | |
| * | |
| * 1. THe UDC registers | |
| * 2. The plug detect | |
| * 3. The RX/TX FIFO | |
| */ | |
| #define MAX_ENDPOINTS 16 | |
| struct udc_endp_regs { | |
| u32 endp_cntl; | |
| u32 endp_status; | |
| u32 endp_bsorfn; | |
| u32 endp_maxpacksize; | |
| u32 reserved_1; | |
| u32 endp_desc_point; | |
| u32 reserved_2; | |
| u32 write_done; | |
| }; | |
| /* Endpoint Control Register definitions */ | |
| #define ENDP_CNTL_STALL 0x00000001 | |
| #define ENDP_CNTL_FLUSH 0x00000002 | |
| #define ENDP_CNTL_SNOOP 0x00000004 | |
| #define ENDP_CNTL_POLL 0x00000008 | |
| #define ENDP_CNTL_CONTROL 0x00000000 | |
| #define ENDP_CNTL_ISO 0x00000010 | |
| #define ENDP_CNTL_BULK 0x00000020 | |
| #define ENDP_CNTL_INT 0x00000030 | |
| #define ENDP_CNTL_NAK 0x00000040 | |
| #define ENDP_CNTL_SNAK 0x00000080 | |
| #define ENDP_CNTL_CNAK 0x00000100 | |
| #define ENDP_CNTL_RRDY 0x00000200 | |
| /* Endpoint Satus Register definitions */ | |
| #define ENDP_STATUS_PIDMSK 0x0000000f | |
| #define ENDP_STATUS_OUTMSK 0x00000030 | |
| #define ENDP_STATUS_OUT_NONE 0x00000000 | |
| #define ENDP_STATUS_OUT_DATA 0x00000010 | |
| #define ENDP_STATUS_OUT_SETUP 0x00000020 | |
| #define ENDP_STATUS_IN 0x00000040 | |
| #define ENDP_STATUS_BUFFNAV 0x00000080 | |
| #define ENDP_STATUS_FATERR 0x00000100 | |
| #define ENDP_STATUS_HOSTBUSERR 0x00000200 | |
| #define ENDP_STATUS_TDC 0x00000400 | |
| #define ENDP_STATUS_RXPKTMSK 0x003ff800 | |
| struct udc_regs { | |
| struct udc_endp_regs in_regs[MAX_ENDPOINTS]; | |
| struct udc_endp_regs out_regs[MAX_ENDPOINTS]; | |
| u32 dev_conf; | |
| u32 dev_cntl; | |
| u32 dev_stat; | |
| u32 dev_int; | |
| u32 dev_int_mask; | |
| u32 endp_int; | |
| u32 endp_int_mask; | |
| u32 reserved_3[0x39]; | |
| u32 reserved_4; /* offset 0x500 */ | |
| u32 udc_endp_reg[MAX_ENDPOINTS]; | |
| }; | |
| /* Device Configuration Register definitions */ | |
| #define DEV_CONF_HS_SPEED 0x00000000 | |
| #define DEV_CONF_LS_SPEED 0x00000002 | |
| #define DEV_CONF_FS_SPEED 0x00000003 | |
| #define DEV_CONF_REMWAKEUP 0x00000004 | |
| #define DEV_CONF_SELFPOW 0x00000008 | |
| #define DEV_CONF_SYNCFRAME 0x00000010 | |
| #define DEV_CONF_PHYINT_8 0x00000020 | |
| #define DEV_CONF_PHYINT_16 0x00000000 | |
| #define DEV_CONF_UTMI_BIDIR 0x00000040 | |
| #define DEV_CONF_STATUS_STALL 0x00000080 | |
| /* Device Control Register definitions */ | |
| #define DEV_CNTL_RESUME 0x00000001 | |
| #define DEV_CNTL_TFFLUSH 0x00000002 | |
| #define DEV_CNTL_RXDMAEN 0x00000004 | |
| #define DEV_CNTL_TXDMAEN 0x00000008 | |
| #define DEV_CNTL_DESCRUPD 0x00000010 | |
| #define DEV_CNTL_BIGEND 0x00000020 | |
| #define DEV_CNTL_BUFFILL 0x00000040 | |
| #define DEV_CNTL_TSHLDEN 0x00000080 | |
| #define DEV_CNTL_BURSTEN 0x00000100 | |
| #define DEV_CNTL_DMAMODE 0x00000200 | |
| #define DEV_CNTL_SOFTDISCONNECT 0x00000400 | |
| #define DEV_CNTL_SCALEDOWN 0x00000800 | |
| #define DEV_CNTL_BURSTLENU 0x00010000 | |
| #define DEV_CNTL_BURSTLENMSK 0x00ff0000 | |
| #define DEV_CNTL_TSHLDLENU 0x01000000 | |
| #define DEV_CNTL_TSHLDLENMSK 0xff000000 | |
| /* Device Status Register definitions */ | |
| #define DEV_STAT_CFG 0x0000000f | |
| #define DEV_STAT_INTF 0x000000f0 | |
| #define DEV_STAT_ALT 0x00000f00 | |
| #define DEV_STAT_SUSP 0x00001000 | |
| #define DEV_STAT_ENUM 0x00006000 | |
| #define DEV_STAT_ENUM_SPEED_HS 0x00000000 | |
| #define DEV_STAT_ENUM_SPEED_FS 0x00002000 | |
| #define DEV_STAT_ENUM_SPEED_LS 0x00004000 | |
| #define DEV_STAT_RXFIFO_EMPTY 0x00008000 | |
| #define DEV_STAT_PHY_ERR 0x00010000 | |
| #define DEV_STAT_TS 0xf0000000 | |
| /* Device Interrupt Register definitions */ | |
| #define DEV_INT_MSK 0x0000007f | |
| #define DEV_INT_SETCFG 0x00000001 | |
| #define DEV_INT_SETINTF 0x00000002 | |
| #define DEV_INT_INACTIVE 0x00000004 | |
| #define DEV_INT_USBRESET 0x00000008 | |
| #define DEV_INT_SUSPUSB 0x00000010 | |
| #define DEV_INT_SOF 0x00000020 | |
| #define DEV_INT_ENUM 0x00000040 | |
| /* Endpoint Interrupt Register definitions */ | |
| #define ENDP0_INT_CTRLIN 0x00000001 | |
| #define ENDP1_INT_BULKIN 0x00000002 | |
| #define ENDP_INT_NONISOIN_MSK 0x0000AAAA | |
| #define ENDP2_INT_BULKIN 0x00000004 | |
| #define ENDP0_INT_CTRLOUT 0x00010000 | |
| #define ENDP1_INT_BULKOUT 0x00020000 | |
| #define ENDP2_INT_BULKOUT 0x00040000 | |
| #define ENDP_INT_NONISOOUT_MSK 0x55540000 | |
| /* Endpoint Register definitions */ | |
| #define ENDP_EPDIR_OUT 0x00000000 | |
| #define ENDP_EPDIR_IN 0x00000010 | |
| #define ENDP_EPTYPE_CNTL 0x0 | |
| #define ENDP_EPTYPE_ISO 0x1 | |
| #define ENDP_EPTYPE_BULK 0x2 | |
| #define ENDP_EPTYPE_INT 0x3 | |
| /* | |
| * Defines for Plug Detect | |
| */ | |
| struct plug_regs { | |
| u32 plug_state; | |
| u32 plug_pending; | |
| }; | |
| /* Plug State Register definitions */ | |
| #define PLUG_STATUS_EN 0x1 | |
| #define PLUG_STATUS_ATTACHED 0x2 | |
| #define PLUG_STATUS_PHY_RESET 0x4 | |
| #define PLUG_STATUS_PHY_MODE 0x8 | |
| /* | |
| * Defines for UDC FIFO (Slave Mode) | |
| */ | |
| struct udcfifo_regs { | |
| u32 *fifo_p; | |
| }; | |
| /* | |
| * USBTTY definitions | |
| */ | |
| #define EP0_MAX_PACKET_SIZE 64 | |
| #define UDC_INT_ENDPOINT 1 | |
| #define UDC_INT_PACKET_SIZE 64 | |
| #define UDC_OUT_ENDPOINT 2 | |
| #define UDC_BULK_PACKET_SIZE 64 | |
| #define UDC_BULK_HS_PACKET_SIZE 512 | |
| #define UDC_IN_ENDPOINT 3 | |
| #define UDC_OUT_PACKET_SIZE 64 | |
| #define UDC_IN_PACKET_SIZE 64 | |
| /* | |
| * UDC endpoint definitions | |
| */ | |
| #define UDC_EP0 0 | |
| #define UDC_EP1 1 | |
| #define UDC_EP2 2 | |
| #define UDC_EP3 3 | |
| /* | |
| * Function declarations | |
| */ | |
| void udc_irq(void); | |
| void udc_set_nak(int epid); | |
| void udc_unset_nak(int epid); | |
| int udc_endpoint_write(struct usb_endpoint_instance *endpoint); | |
| int udc_init(void); | |
| void udc_enable(struct usb_device_instance *device); | |
| void udc_disable(void); | |
| void udc_connect(void); | |
| void udc_disconnect(void); | |
| void udc_startup_events(struct usb_device_instance *device); | |
| void udc_setup_ep(struct usb_device_instance *device, unsigned int ep, | |
| struct usb_endpoint_instance *endpoint); | |
| #endif /* __DW_UDC_H */ |