| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2015 | |
| * Kamil Lulko, <kamil.lulko@gmail.com> | |
| */ | |
| #include <config.h> | |
| #include <flash.h> | |
| #include <asm/io.h> | |
| #include <asm/arch/stm32.h> | |
| #include "stm32_flash.h" | |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; | |
| #define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_CNTL_BASE) | |
| void stm32_flash_latency_cfg(int latency) | |
| { | |
| /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ | |
| writel(FLASH_ACR_WS(latency) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | |
| | FLASH_ACR_DCEN, &STM32_FLASH->acr); | |
| } | |
| static void stm32_flash_lock(u8 lock) | |
| { | |
| if (lock) { | |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_LOCK); | |
| } else { | |
| writel(STM32_FLASH_KEY1, &STM32_FLASH->key); | |
| writel(STM32_FLASH_KEY2, &STM32_FLASH->key); | |
| } | |
| } | |
| unsigned long flash_init(void) | |
| { | |
| unsigned long total_size = 0; | |
| u8 i, j; | |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { | |
| flash_info[i].flash_id = FLASH_STM32; | |
| flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; | |
| flash_info[i].start[0] = CFG_SYS_FLASH_BASE + (i << 20); | |
| flash_info[i].size = sect_sz_kb[0]; | |
| for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) { | |
| flash_info[i].start[j] = flash_info[i].start[j - 1] | |
| + (sect_sz_kb[j - 1]); | |
| flash_info[i].size += sect_sz_kb[j]; | |
| } | |
| total_size += flash_info[i].size; | |
| } | |
| return total_size; | |
| } | |
| void flash_print_info(flash_info_t *info) | |
| { | |
| int i; | |
| if (info->flash_id == FLASH_UNKNOWN) { | |
| printf("missing or unknown FLASH type\n"); | |
| return; | |
| } else if (info->flash_id == FLASH_STM32) { | |
| printf("stm32 Embedded Flash\n"); | |
| } | |
| printf(" Size: %ld MB in %d Sectors\n", | |
| info->size >> 20, info->sector_count); | |
| printf(" Sector Start Addresses:"); | |
| for (i = 0; i < info->sector_count; ++i) { | |
| if ((i % 5) == 0) | |
| printf("\n "); | |
| printf(" %08lX%s", | |
| info->start[i], | |
| info->protect[i] ? " (RO)" : " "); | |
| } | |
| printf("\n"); | |
| return; | |
| } | |
| int flash_erase(flash_info_t *info, int first, int last) | |
| { | |
| u8 bank = 0xFF; | |
| int i; | |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { | |
| if (info == &flash_info[i]) { | |
| bank = i; | |
| break; | |
| } | |
| } | |
| if (bank == 0xFF) | |
| return -1; | |
| stm32_flash_lock(0); | |
| for (i = first; i <= last; i++) { | |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) | |
| ; | |
| /* clear old sector number before writing a new one */ | |
| clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SNB_MASK); | |
| if (bank == 0) { | |
| setbits_le32(&STM32_FLASH->cr, | |
| (i << STM32_FLASH_CR_SNB_OFFSET)); | |
| } else if (bank == 1) { | |
| setbits_le32(&STM32_FLASH->cr, | |
| ((0x10 | i) << STM32_FLASH_CR_SNB_OFFSET)); | |
| } else { | |
| stm32_flash_lock(1); | |
| return -1; | |
| } | |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); | |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_STRT); | |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) | |
| ; | |
| clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); | |
| } | |
| stm32_flash_lock(1); | |
| return 0; | |
| } | |
| int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) | |
| { | |
| ulong i; | |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) | |
| ; | |
| stm32_flash_lock(0); | |
| setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); | |
| /* To make things simple use byte writes only */ | |
| for (i = 0; i < cnt; i++) { | |
| *(uchar *)(addr + i) = src[i]; | |
| /* avoid re-ordering flash data write and busy status | |
| * check as flash memory space attributes are generally Normal | |
| */ | |
| mb(); | |
| while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) | |
| ; | |
| } | |
| clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); | |
| stm32_flash_lock(1); | |
| return 0; | |
| } |