| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * (C) Copyright 2000-2010 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> | |
| * Andreas Heppel <aheppel@sysgo.de> | |
| */ | |
| #include <common.h> | |
| #include <command.h> | |
| #include <env.h> | |
| #include <env_internal.h> | |
| #include <linux/stddef.h> | |
| #include <search.h> | |
| #include <errno.h> | |
| #include <malloc.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /************************************************************************ | |
| * Default settings to be used when no valid environment is found | |
| */ | |
| #include <env_default.h> | |
| struct hsearch_data env_htab = { | |
| .change_ok = env_flags_validate, | |
| }; | |
| /* | |
| * Read an environment variable as a boolean | |
| * Return -1 if variable does not exist (default to true) | |
| */ | |
| int env_get_yesno(const char *var) | |
| { | |
| char *s = env_get(var); | |
| if (s == NULL) | |
| return -1; | |
| return (*s == '1' || *s == 'y' || *s == 'Y' || *s == 't' || *s == 'T') ? | |
| 1 : 0; | |
| } | |
| /* | |
| * Look up the variable from the default environment | |
| */ | |
| char *env_get_default(const char *name) | |
| { | |
| char *ret_val; | |
| unsigned long really_valid = gd->env_valid; | |
| unsigned long real_gd_flags = gd->flags; | |
| /* Pretend that the image is bad. */ | |
| gd->flags &= ~GD_FLG_ENV_READY; | |
| gd->env_valid = ENV_INVALID; | |
| ret_val = env_get(name); | |
| gd->env_valid = really_valid; | |
| gd->flags = real_gd_flags; | |
| return ret_val; | |
| } | |
| void env_set_default(const char *s, int flags) | |
| { | |
| if (sizeof(default_environment) > ENV_SIZE) { | |
| puts("*** Error - default environment is too large\n\n"); | |
| return; | |
| } | |
| if (s) { | |
| if ((flags & H_INTERACTIVE) == 0) { | |
| printf("*** Warning - %s, " | |
| "using default environment\n\n", s); | |
| } else { | |
| puts(s); | |
| } | |
| } else { | |
| debug("Using default environment\n"); | |
| } | |
| if (himport_r(&env_htab, (char *)default_environment, | |
| sizeof(default_environment), '\0', flags, 0, | |
| 0, NULL) == 0) | |
| pr_err("## Error: Environment import failed: errno = %d\n", | |
| errno); | |
| gd->flags |= GD_FLG_ENV_READY; | |
| gd->flags |= GD_FLG_ENV_DEFAULT; | |
| } | |
| /* [re]set individual variables to their value in the default environment */ | |
| int env_set_default_vars(int nvars, char * const vars[], int flags) | |
| { | |
| /* | |
| * Special use-case: import from default environment | |
| * (and use \0 as a separator) | |
| */ | |
| flags |= H_NOCLEAR; | |
| return himport_r(&env_htab, (const char *)default_environment, | |
| sizeof(default_environment), '\0', | |
| flags, 0, nvars, vars); | |
| } | |
| /* | |
| * Check if CRC is valid and (if yes) import the environment. | |
| * Note that "buf" may or may not be aligned. | |
| */ | |
| int env_import(const char *buf, int check) | |
| { | |
| env_t *ep = (env_t *)buf; | |
| if (check) { | |
| uint32_t crc; | |
| memcpy(&crc, &ep->crc, sizeof(crc)); | |
| if (crc32(0, ep->data, ENV_SIZE) != crc) { | |
| env_set_default("bad CRC", 0); | |
| return -ENOMSG; /* needed for env_load() */ | |
| } | |
| } | |
| if (himport_r(&env_htab, (char *)ep->data, ENV_SIZE, '\0', 0, 0, | |
| 0, NULL)) { | |
| gd->flags |= GD_FLG_ENV_READY; | |
| return 0; | |
| } | |
| pr_err("Cannot import environment: errno = %d\n", errno); | |
| env_set_default("import failed", 0); | |
| return -EIO; | |
| } | |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT | |
| static unsigned char env_flags; | |
| int env_import_redund(const char *buf1, int buf1_read_fail, | |
| const char *buf2, int buf2_read_fail) | |
| { | |
| int crc1_ok, crc2_ok; | |
| env_t *ep, *tmp_env1, *tmp_env2; | |
| tmp_env1 = (env_t *)buf1; | |
| tmp_env2 = (env_t *)buf2; | |
| if (buf1_read_fail && buf2_read_fail) { | |
| puts("*** Error - No Valid Environment Area found\n"); | |
| } else if (buf1_read_fail || buf2_read_fail) { | |
| puts("*** Warning - some problems detected "); | |
| puts("reading environment; recovered successfully\n"); | |
| } | |
| if (buf1_read_fail && buf2_read_fail) { | |
| env_set_default("bad env area", 0); | |
| return -EIO; | |
| } else if (!buf1_read_fail && buf2_read_fail) { | |
| gd->env_valid = ENV_VALID; | |
| return env_import((char *)tmp_env1, 1); | |
| } else if (buf1_read_fail && !buf2_read_fail) { | |
| gd->env_valid = ENV_REDUND; | |
| return env_import((char *)tmp_env2, 1); | |
| } | |
| crc1_ok = crc32(0, tmp_env1->data, ENV_SIZE) == | |
| tmp_env1->crc; | |
| crc2_ok = crc32(0, tmp_env2->data, ENV_SIZE) == | |
| tmp_env2->crc; | |
| if (!crc1_ok && !crc2_ok) { | |
| env_set_default("bad CRC", 0); | |
| return -ENOMSG; /* needed for env_load() */ | |
| } else if (crc1_ok && !crc2_ok) { | |
| gd->env_valid = ENV_VALID; | |
| } else if (!crc1_ok && crc2_ok) { | |
| gd->env_valid = ENV_REDUND; | |
| } else { | |
| /* both ok - check serial */ | |
| if (tmp_env1->flags == 255 && tmp_env2->flags == 0) | |
| gd->env_valid = ENV_REDUND; | |
| else if (tmp_env2->flags == 255 && tmp_env1->flags == 0) | |
| gd->env_valid = ENV_VALID; | |
| else if (tmp_env1->flags > tmp_env2->flags) | |
| gd->env_valid = ENV_VALID; | |
| else if (tmp_env2->flags > tmp_env1->flags) | |
| gd->env_valid = ENV_REDUND; | |
| else /* flags are equal - almost impossible */ | |
| gd->env_valid = ENV_VALID; | |
| } | |
| if (gd->env_valid == ENV_VALID) | |
| ep = tmp_env1; | |
| else | |
| ep = tmp_env2; | |
| env_flags = ep->flags; | |
| return env_import((char *)ep, 0); | |
| } | |
| #endif /* CONFIG_SYS_REDUNDAND_ENVIRONMENT */ | |
| /* Export the environment and generate CRC for it. */ | |
| int env_export(env_t *env_out) | |
| { | |
| char *res; | |
| ssize_t len; | |
| res = (char *)env_out->data; | |
| len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); | |
| if (len < 0) { | |
| pr_err("Cannot export environment: errno = %d\n", errno); | |
| return 1; | |
| } | |
| env_out->crc = crc32(0, env_out->data, ENV_SIZE); | |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT | |
| env_out->flags = ++env_flags; /* increase the serial */ | |
| #endif | |
| return 0; | |
| } | |
| void env_relocate(void) | |
| { | |
| #if defined(CONFIG_NEEDS_MANUAL_RELOC) | |
| env_reloc(); | |
| env_fix_drivers(); | |
| env_htab.change_ok += gd->reloc_off; | |
| #endif | |
| if (gd->env_valid == ENV_INVALID) { | |
| #if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD) | |
| /* Environment not changable */ | |
| env_set_default(NULL, 0); | |
| #else | |
| bootstage_error(BOOTSTAGE_ID_NET_CHECKSUM); | |
| env_set_default("bad CRC", 0); | |
| #endif | |
| } else { | |
| env_load(); | |
| } | |
| } | |
| #ifdef CONFIG_AUTO_COMPLETE | |
| int env_complete(char *var, int maxv, char *cmdv[], int bufsz, char *buf, | |
| bool dollar_comp) | |
| { | |
| struct env_entry *match; | |
| int found, idx; | |
| if (dollar_comp) { | |
| /* | |
| * When doing $ completion, the first character should | |
| * obviously be a '$'. | |
| */ | |
| if (var[0] != '$') | |
| return 0; | |
| var++; | |
| /* | |
| * The second one, if present, should be a '{', as some | |
| * configuration of the u-boot shell expand ${var} but not | |
| * $var. | |
| */ | |
| if (var[0] == '{') | |
| var++; | |
| else if (var[0] != '\0') | |
| return 0; | |
| } | |
| idx = 0; | |
| found = 0; | |
| cmdv[0] = NULL; | |
| while ((idx = hmatch_r(var, idx, &match, &env_htab))) { | |
| int vallen = strlen(match->key) + 1; | |
| if (found >= maxv - 2 || | |
| bufsz < vallen + (dollar_comp ? 3 : 0)) | |
| break; | |
| cmdv[found++] = buf; | |
| /* Add the '${' prefix to each var when doing $ completion. */ | |
| if (dollar_comp) { | |
| strcpy(buf, "${"); | |
| buf += 2; | |
| bufsz -= 3; | |
| } | |
| memcpy(buf, match->key, vallen); | |
| buf += vallen; | |
| bufsz -= vallen; | |
| if (dollar_comp) { | |
| /* | |
| * This one is a bit odd: vallen already contains the | |
| * '\0' character but we need to add the '}' suffix, | |
| * hence the buf - 1 here. strcpy() will add the '\0' | |
| * character just after '}'. buf is then incremented | |
| * to account for the extra '}' we just added. | |
| */ | |
| strcpy(buf - 1, "}"); | |
| buf++; | |
| } | |
| } | |
| qsort(cmdv, found, sizeof(cmdv[0]), strcmp_compar); | |
| if (idx) | |
| cmdv[found++] = dollar_comp ? "${...}" : "..."; | |
| cmdv[found] = NULL; | |
| return found; | |
| } | |
| #endif |