| /* | |
| * linux/lib/vsprintf.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| */ | |
| /* vsprintf.c -- Lars Wirzenius & Linus Torvalds. */ | |
| /* | |
| * Wirzenius wrote this portably, Torvalds fucked it up :-) | |
| * | |
| * from hush: simple_itoa() was lifted from boa-0.93.15 | |
| */ | |
| #include <common.h> | |
| #include <charset.h> | |
| #include <efi_loader.h> | |
| #include <div64.h> | |
| #include <hexdump.h> | |
| #include <stdarg.h> | |
| #include <linux/ctype.h> | |
| #include <linux/err.h> | |
| #include <linux/types.h> | |
| #include <linux/string.h> | |
| #define noinline __attribute__((noinline)) | |
| /* we use this so that we can do without the ctype library */ | |
| #define is_digit(c) ((c) >= '0' && (c) <= '9') | |
| static int skip_atoi(const char **s) | |
| { | |
| int i = 0; | |
| while (is_digit(**s)) | |
| i = i * 10 + *((*s)++) - '0'; | |
| return i; | |
| } | |
| /* Decimal conversion is by far the most typical, and is used | |
| * for /proc and /sys data. This directly impacts e.g. top performance | |
| * with many processes running. We optimize it for speed | |
| * using code from | |
| * http://www.cs.uiowa.edu/~jones/bcd/decimal.html | |
| * (with permission from the author, Douglas W. Jones). */ | |
| /* Formats correctly any integer in [0,99999]. | |
| * Outputs from one to five digits depending on input. | |
| * On i386 gcc 4.1.2 -O2: ~250 bytes of code. */ | |
| static char *put_dec_trunc(char *buf, unsigned q) | |
| { | |
| unsigned d3, d2, d1, d0; | |
| d1 = (q>>4) & 0xf; | |
| d2 = (q>>8) & 0xf; | |
| d3 = (q>>12); | |
| d0 = 6*(d3 + d2 + d1) + (q & 0xf); | |
| q = (d0 * 0xcd) >> 11; | |
| d0 = d0 - 10*q; | |
| *buf++ = d0 + '0'; /* least significant digit */ | |
| d1 = q + 9*d3 + 5*d2 + d1; | |
| if (d1 != 0) { | |
| q = (d1 * 0xcd) >> 11; | |
| d1 = d1 - 10*q; | |
| *buf++ = d1 + '0'; /* next digit */ | |
| d2 = q + 2*d2; | |
| if ((d2 != 0) || (d3 != 0)) { | |
| q = (d2 * 0xd) >> 7; | |
| d2 = d2 - 10*q; | |
| *buf++ = d2 + '0'; /* next digit */ | |
| d3 = q + 4*d3; | |
| if (d3 != 0) { | |
| q = (d3 * 0xcd) >> 11; | |
| d3 = d3 - 10*q; | |
| *buf++ = d3 + '0'; /* next digit */ | |
| if (q != 0) | |
| *buf++ = q + '0'; /* most sign. digit */ | |
| } | |
| } | |
| } | |
| return buf; | |
| } | |
| /* Same with if's removed. Always emits five digits */ | |
| static char *put_dec_full(char *buf, unsigned q) | |
| { | |
| /* BTW, if q is in [0,9999], 8-bit ints will be enough, */ | |
| /* but anyway, gcc produces better code with full-sized ints */ | |
| unsigned d3, d2, d1, d0; | |
| d1 = (q>>4) & 0xf; | |
| d2 = (q>>8) & 0xf; | |
| d3 = (q>>12); | |
| /* | |
| * Possible ways to approx. divide by 10 | |
| * gcc -O2 replaces multiply with shifts and adds | |
| * (x * 0xcd) >> 11: 11001101 - shorter code than * 0x67 (on i386) | |
| * (x * 0x67) >> 10: 1100111 | |
| * (x * 0x34) >> 9: 110100 - same | |
| * (x * 0x1a) >> 8: 11010 - same | |
| * (x * 0x0d) >> 7: 1101 - same, shortest code (on i386) | |
| */ | |
| d0 = 6*(d3 + d2 + d1) + (q & 0xf); | |
| q = (d0 * 0xcd) >> 11; | |
| d0 = d0 - 10*q; | |
| *buf++ = d0 + '0'; | |
| d1 = q + 9*d3 + 5*d2 + d1; | |
| q = (d1 * 0xcd) >> 11; | |
| d1 = d1 - 10*q; | |
| *buf++ = d1 + '0'; | |
| d2 = q + 2*d2; | |
| q = (d2 * 0xd) >> 7; | |
| d2 = d2 - 10*q; | |
| *buf++ = d2 + '0'; | |
| d3 = q + 4*d3; | |
| q = (d3 * 0xcd) >> 11; /* - shorter code */ | |
| /* q = (d3 * 0x67) >> 10; - would also work */ | |
| d3 = d3 - 10*q; | |
| *buf++ = d3 + '0'; | |
| *buf++ = q + '0'; | |
| return buf; | |
| } | |
| /* No inlining helps gcc to use registers better */ | |
| static noinline char *put_dec(char *buf, uint64_t num) | |
| { | |
| while (1) { | |
| unsigned rem; | |
| if (num < 100000) | |
| return put_dec_trunc(buf, num); | |
| rem = do_div(num, 100000); | |
| buf = put_dec_full(buf, rem); | |
| } | |
| } | |
| #define ZEROPAD 1 /* pad with zero */ | |
| #define SIGN 2 /* unsigned/signed long */ | |
| #define PLUS 4 /* show plus */ | |
| #define SPACE 8 /* space if plus */ | |
| #define LEFT 16 /* left justified */ | |
| #define SMALL 32 /* Must be 32 == 0x20 */ | |
| #define SPECIAL 64 /* 0x */ | |
| /* | |
| * Macro to add a new character to our output string, but only if it will | |
| * fit. The macro moves to the next character position in the output string. | |
| */ | |
| #define ADDCH(str, ch) do { \ | |
| if ((str) < end) \ | |
| *(str) = (ch); \ | |
| ++str; \ | |
| } while (0) | |
| static char *number(char *buf, char *end, u64 num, | |
| int base, int size, int precision, int type) | |
| { | |
| /* we are called with base 8, 10 or 16, only, thus don't need "G..." */ | |
| static const char digits[16] = "0123456789ABCDEF"; | |
| char tmp[66]; | |
| char sign; | |
| char locase; | |
| int need_pfx = ((type & SPECIAL) && base != 10); | |
| int i; | |
| /* locase = 0 or 0x20. ORing digits or letters with 'locase' | |
| * produces same digits or (maybe lowercased) letters */ | |
| locase = (type & SMALL); | |
| if (type & LEFT) | |
| type &= ~ZEROPAD; | |
| sign = 0; | |
| if (type & SIGN) { | |
| if ((s64) num < 0) { | |
| sign = '-'; | |
| num = -(s64) num; | |
| size--; | |
| } else if (type & PLUS) { | |
| sign = '+'; | |
| size--; | |
| } else if (type & SPACE) { | |
| sign = ' '; | |
| size--; | |
| } | |
| } | |
| if (need_pfx) { | |
| size--; | |
| if (base == 16) | |
| size--; | |
| } | |
| /* generate full string in tmp[], in reverse order */ | |
| i = 0; | |
| if (num == 0) | |
| tmp[i++] = '0'; | |
| /* Generic code, for any base: | |
| else do { | |
| tmp[i++] = (digits[do_div(num,base)] | locase); | |
| } while (num != 0); | |
| */ | |
| else if (base != 10) { /* 8 or 16 */ | |
| int mask = base - 1; | |
| int shift = 3; | |
| if (base == 16) | |
| shift = 4; | |
| do { | |
| tmp[i++] = (digits[((unsigned char)num) & mask] | |
| | locase); | |
| num >>= shift; | |
| } while (num); | |
| } else { /* base 10 */ | |
| i = put_dec(tmp, num) - tmp; | |
| } | |
| /* printing 100 using %2d gives "100", not "00" */ | |
| if (i > precision) | |
| precision = i; | |
| /* leading space padding */ | |
| size -= precision; | |
| if (!(type & (ZEROPAD + LEFT))) { | |
| while (--size >= 0) | |
| ADDCH(buf, ' '); | |
| } | |
| /* sign */ | |
| if (sign) | |
| ADDCH(buf, sign); | |
| /* "0x" / "0" prefix */ | |
| if (need_pfx) { | |
| ADDCH(buf, '0'); | |
| if (base == 16) | |
| ADDCH(buf, 'X' | locase); | |
| } | |
| /* zero or space padding */ | |
| if (!(type & LEFT)) { | |
| char c = (type & ZEROPAD) ? '0' : ' '; | |
| while (--size >= 0) | |
| ADDCH(buf, c); | |
| } | |
| /* hmm even more zero padding? */ | |
| while (i <= --precision) | |
| ADDCH(buf, '0'); | |
| /* actual digits of result */ | |
| while (--i >= 0) | |
| ADDCH(buf, tmp[i]); | |
| /* trailing space padding */ | |
| while (--size >= 0) | |
| ADDCH(buf, ' '); | |
| return buf; | |
| } | |
| static char *string(char *buf, char *end, char *s, int field_width, | |
| int precision, int flags) | |
| { | |
| int len, i; | |
| if (s == NULL) | |
| s = "<NULL>"; | |
| len = strnlen(s, precision); | |
| if (!(flags & LEFT)) | |
| while (len < field_width--) | |
| ADDCH(buf, ' '); | |
| for (i = 0; i < len; ++i) | |
| ADDCH(buf, *s++); | |
| while (len < field_width--) | |
| ADDCH(buf, ' '); | |
| return buf; | |
| } | |
| /* U-Boot uses UTF-16 strings in the EFI context only. */ | |
| #if CONFIG_IS_ENABLED(EFI_LOADER) && !defined(API_BUILD) | |
| static char *string16(char *buf, char *end, u16 *s, int field_width, | |
| int precision, int flags) | |
| { | |
| const u16 *str = s ? s : L"<NULL>"; | |
| ssize_t i, len = utf16_strnlen(str, precision); | |
| if (!(flags & LEFT)) | |
| for (; len < field_width; --field_width) | |
| ADDCH(buf, ' '); | |
| for (i = 0; i < len && buf + utf16_utf8_strnlen(str, 1) <= end; ++i) { | |
| s32 s = utf16_get(&str); | |
| if (s < 0) | |
| s = '?'; | |
| utf8_put(s, &buf); | |
| } | |
| for (; len < field_width; --field_width) | |
| ADDCH(buf, ' '); | |
| return buf; | |
| } | |
| #if CONFIG_IS_ENABLED(EFI_DEVICE_PATH_TO_TEXT) | |
| static char *device_path_string(char *buf, char *end, void *dp, int field_width, | |
| int precision, int flags) | |
| { | |
| u16 *str; | |
| /* If dp == NULL output the string '<NULL>' */ | |
| if (!dp) | |
| return string16(buf, end, dp, field_width, precision, flags); | |
| str = efi_dp_str((struct efi_device_path *)dp); | |
| if (!str) | |
| return ERR_PTR(-ENOMEM); | |
| buf = string16(buf, end, str, field_width, precision, flags); | |
| efi_free_pool(str); | |
| return buf; | |
| } | |
| #endif | |
| #endif | |
| #ifdef CONFIG_CMD_NET | |
| static char *mac_address_string(char *buf, char *end, u8 *addr, int field_width, | |
| int precision, int flags) | |
| { | |
| /* (6 * 2 hex digits), 5 colons and trailing zero */ | |
| char mac_addr[6 * 3]; | |
| char *p = mac_addr; | |
| int i; | |
| for (i = 0; i < 6; i++) { | |
| p = hex_byte_pack(p, addr[i]); | |
| if (!(flags & SPECIAL) && i != 5) | |
| *p++ = ':'; | |
| } | |
| *p = '\0'; | |
| return string(buf, end, mac_addr, field_width, precision, | |
| flags & ~SPECIAL); | |
| } | |
| static char *ip6_addr_string(char *buf, char *end, u8 *addr, int field_width, | |
| int precision, int flags) | |
| { | |
| /* (8 * 4 hex digits), 7 colons and trailing zero */ | |
| char ip6_addr[8 * 5]; | |
| char *p = ip6_addr; | |
| int i; | |
| for (i = 0; i < 8; i++) { | |
| p = hex_byte_pack(p, addr[2 * i]); | |
| p = hex_byte_pack(p, addr[2 * i + 1]); | |
| if (!(flags & SPECIAL) && i != 7) | |
| *p++ = ':'; | |
| } | |
| *p = '\0'; | |
| return string(buf, end, ip6_addr, field_width, precision, | |
| flags & ~SPECIAL); | |
| } | |
| static char *ip4_addr_string(char *buf, char *end, u8 *addr, int field_width, | |
| int precision, int flags) | |
| { | |
| /* (4 * 3 decimal digits), 3 dots and trailing zero */ | |
| char ip4_addr[4 * 4]; | |
| char temp[3]; /* hold each IP quad in reverse order */ | |
| char *p = ip4_addr; | |
| int i, digits; | |
| for (i = 0; i < 4; i++) { | |
| digits = put_dec_trunc(temp, addr[i]) - temp; | |
| /* reverse the digits in the quad */ | |
| while (digits--) | |
| *p++ = temp[digits]; | |
| if (i != 3) | |
| *p++ = '.'; | |
| } | |
| *p = '\0'; | |
| return string(buf, end, ip4_addr, field_width, precision, | |
| flags & ~SPECIAL); | |
| } | |
| #endif | |
| #ifdef CONFIG_LIB_UUID | |
| /* | |
| * This works (roughly) the same way as Linux's. | |
| * | |
| * %pUb: 01020304-0506-0708-090a-0b0c0d0e0f10 | |
| * %pUB: 01020304-0506-0708-090A-0B0C0D0E0F10 | |
| * %pUl: 04030201-0605-0807-090a-0b0c0d0e0f10 | |
| * %pUL: 04030201-0605-0807-090A-0B0C0D0E0F10 | |
| */ | |
| static char *uuid_string(char *buf, char *end, u8 *addr, int field_width, | |
| int precision, int flags, const char *fmt) | |
| { | |
| char uuid[UUID_STR_LEN + 1]; | |
| int str_format; | |
| switch (*(++fmt)) { | |
| case 'L': | |
| str_format = UUID_STR_FORMAT_GUID | UUID_STR_UPPER_CASE; | |
| break; | |
| case 'l': | |
| str_format = UUID_STR_FORMAT_GUID; | |
| break; | |
| case 'B': | |
| str_format = UUID_STR_FORMAT_STD | UUID_STR_UPPER_CASE; | |
| break; | |
| default: | |
| str_format = UUID_STR_FORMAT_STD; | |
| break; | |
| } | |
| if (addr) | |
| uuid_bin_to_str(addr, uuid, str_format); | |
| else | |
| strcpy(uuid, "<NULL>"); | |
| return string(buf, end, uuid, field_width, precision, flags); | |
| } | |
| #endif | |
| /* | |
| * Show a '%p' thing. A kernel extension is that the '%p' is followed | |
| * by an extra set of alphanumeric characters that are extended format | |
| * specifiers. | |
| * | |
| * Right now we handle: | |
| * | |
| * - 'M' For a 6-byte MAC address, it prints the address in the | |
| * usual colon-separated hex notation | |
| * - 'I' [46] for IPv4/IPv6 addresses printed in the usual way (dot-separated | |
| * decimal for v4 and colon separated network-order 16 bit hex for v6) | |
| * - 'i' [46] for 'raw' IPv4/IPv6 addresses, IPv6 omits the colons, IPv4 is | |
| * currently the same | |
| * | |
| * Note: The difference between 'S' and 'F' is that on ia64 and ppc64 | |
| * function pointers are really function descriptors, which contain a | |
| * pointer to the real address. | |
| */ | |
| static char *pointer(const char *fmt, char *buf, char *end, void *ptr, | |
| int field_width, int precision, int flags) | |
| { | |
| u64 num = (uintptr_t)ptr; | |
| /* | |
| * Being a boot loader, we explicitly allow pointers to | |
| * (physical) address null. | |
| */ | |
| #if 0 | |
| if (!ptr) | |
| return string(buf, end, "(null)", field_width, precision, | |
| flags); | |
| #endif | |
| switch (*fmt) { | |
| /* Device paths only exist in the EFI context. */ | |
| #if CONFIG_IS_ENABLED(EFI_DEVICE_PATH_TO_TEXT) && !defined(API_BUILD) | |
| case 'D': | |
| return device_path_string(buf, end, ptr, field_width, | |
| precision, flags); | |
| #endif | |
| case 'a': | |
| flags |= SPECIAL | ZEROPAD; | |
| switch (fmt[1]) { | |
| case 'p': | |
| default: | |
| field_width = sizeof(phys_addr_t) * 2 + 2; | |
| num = *(phys_addr_t *)ptr; | |
| break; | |
| } | |
| break; | |
| #ifdef CONFIG_CMD_NET | |
| case 'm': | |
| flags |= SPECIAL; | |
| /* Fallthrough */ | |
| case 'M': | |
| return mac_address_string(buf, end, ptr, field_width, | |
| precision, flags); | |
| case 'i': | |
| flags |= SPECIAL; | |
| /* Fallthrough */ | |
| case 'I': | |
| if (fmt[1] == '6') | |
| return ip6_addr_string(buf, end, ptr, field_width, | |
| precision, flags); | |
| if (fmt[1] == '4') | |
| return ip4_addr_string(buf, end, ptr, field_width, | |
| precision, flags); | |
| flags &= ~SPECIAL; | |
| break; | |
| #endif | |
| #ifdef CONFIG_LIB_UUID | |
| case 'U': | |
| return uuid_string(buf, end, ptr, field_width, precision, | |
| flags, fmt); | |
| #endif | |
| default: | |
| break; | |
| } | |
| flags |= SMALL; | |
| if (field_width == -1) { | |
| field_width = 2*sizeof(void *); | |
| flags |= ZEROPAD; | |
| } | |
| return number(buf, end, num, 16, field_width, precision, flags); | |
| } | |
| static int vsnprintf_internal(char *buf, size_t size, const char *fmt, | |
| va_list args) | |
| { | |
| u64 num; | |
| int base; | |
| char *str; | |
| int flags; /* flags to number() */ | |
| int field_width; /* width of output field */ | |
| int precision; /* min. # of digits for integers; max | |
| number of chars for from string */ | |
| int qualifier; /* 'h', 'l', or 'L' for integer fields */ | |
| /* 'z' support added 23/7/1999 S.H. */ | |
| /* 'z' changed to 'Z' --davidm 1/25/99 */ | |
| /* 't' added for ptrdiff_t */ | |
| char *end = buf + size; | |
| /* Make sure end is always >= buf - do we want this in U-Boot? */ | |
| if (end < buf) { | |
| end = ((void *)-1); | |
| size = end - buf; | |
| } | |
| str = buf; | |
| for (; *fmt ; ++fmt) { | |
| if (*fmt != '%') { | |
| ADDCH(str, *fmt); | |
| continue; | |
| } | |
| /* process flags */ | |
| flags = 0; | |
| repeat: | |
| ++fmt; /* this also skips first '%' */ | |
| switch (*fmt) { | |
| case '-': | |
| flags |= LEFT; | |
| goto repeat; | |
| case '+': | |
| flags |= PLUS; | |
| goto repeat; | |
| case ' ': | |
| flags |= SPACE; | |
| goto repeat; | |
| case '#': | |
| flags |= SPECIAL; | |
| goto repeat; | |
| case '0': | |
| flags |= ZEROPAD; | |
| goto repeat; | |
| } | |
| /* get field width */ | |
| field_width = -1; | |
| if (is_digit(*fmt)) | |
| field_width = skip_atoi(&fmt); | |
| else if (*fmt == '*') { | |
| ++fmt; | |
| /* it's the next argument */ | |
| field_width = va_arg(args, int); | |
| if (field_width < 0) { | |
| field_width = -field_width; | |
| flags |= LEFT; | |
| } | |
| } | |
| /* get the precision */ | |
| precision = -1; | |
| if (*fmt == '.') { | |
| ++fmt; | |
| if (is_digit(*fmt)) | |
| precision = skip_atoi(&fmt); | |
| else if (*fmt == '*') { | |
| ++fmt; | |
| /* it's the next argument */ | |
| precision = va_arg(args, int); | |
| } | |
| if (precision < 0) | |
| precision = 0; | |
| } | |
| /* get the conversion qualifier */ | |
| qualifier = -1; | |
| if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || | |
| *fmt == 'Z' || *fmt == 'z' || *fmt == 't') { | |
| qualifier = *fmt; | |
| ++fmt; | |
| if (qualifier == 'l' && *fmt == 'l') { | |
| qualifier = 'L'; | |
| ++fmt; | |
| } | |
| } | |
| /* default base */ | |
| base = 10; | |
| switch (*fmt) { | |
| case 'c': | |
| if (!(flags & LEFT)) { | |
| while (--field_width > 0) | |
| ADDCH(str, ' '); | |
| } | |
| ADDCH(str, (unsigned char) va_arg(args, int)); | |
| while (--field_width > 0) | |
| ADDCH(str, ' '); | |
| continue; | |
| case 's': | |
| /* U-Boot uses UTF-16 strings in the EFI context only. */ | |
| #if CONFIG_IS_ENABLED(EFI_LOADER) && !defined(API_BUILD) | |
| if (qualifier == 'l') { | |
| str = string16(str, end, va_arg(args, u16 *), | |
| field_width, precision, flags); | |
| } else | |
| #endif | |
| { | |
| str = string(str, end, va_arg(args, char *), | |
| field_width, precision, flags); | |
| } | |
| continue; | |
| case 'p': | |
| str = pointer(fmt + 1, str, end, | |
| va_arg(args, void *), | |
| field_width, precision, flags); | |
| if (IS_ERR(str)) | |
| return PTR_ERR(str); | |
| /* Skip all alphanumeric pointer suffixes */ | |
| while (isalnum(fmt[1])) | |
| fmt++; | |
| continue; | |
| case 'n': | |
| if (qualifier == 'l') { | |
| long *ip = va_arg(args, long *); | |
| *ip = (str - buf); | |
| } else { | |
| int *ip = va_arg(args, int *); | |
| *ip = (str - buf); | |
| } | |
| continue; | |
| case '%': | |
| ADDCH(str, '%'); | |
| continue; | |
| /* integer number formats - set up the flags and "break" */ | |
| case 'o': | |
| base = 8; | |
| break; | |
| case 'x': | |
| flags |= SMALL; | |
| case 'X': | |
| base = 16; | |
| break; | |
| case 'd': | |
| case 'i': | |
| flags |= SIGN; | |
| case 'u': | |
| break; | |
| default: | |
| ADDCH(str, '%'); | |
| if (*fmt) | |
| ADDCH(str, *fmt); | |
| else | |
| --fmt; | |
| continue; | |
| } | |
| if (qualifier == 'L') /* "quad" for 64 bit variables */ | |
| num = va_arg(args, unsigned long long); | |
| else if (qualifier == 'l') { | |
| num = va_arg(args, unsigned long); | |
| if (flags & SIGN) | |
| num = (signed long) num; | |
| } else if (qualifier == 'Z' || qualifier == 'z') { | |
| num = va_arg(args, size_t); | |
| } else if (qualifier == 't') { | |
| num = va_arg(args, ptrdiff_t); | |
| } else if (qualifier == 'h') { | |
| num = (unsigned short) va_arg(args, int); | |
| if (flags & SIGN) | |
| num = (signed short) num; | |
| } else { | |
| num = va_arg(args, unsigned int); | |
| if (flags & SIGN) | |
| num = (signed int) num; | |
| } | |
| str = number(str, end, num, base, field_width, precision, | |
| flags); | |
| } | |
| if (size > 0) { | |
| ADDCH(str, '\0'); | |
| if (str > end) | |
| end[-1] = '\0'; | |
| --str; | |
| } | |
| /* the trailing null byte doesn't count towards the total */ | |
| return str - buf; | |
| } | |
| int vsnprintf(char *buf, size_t size, const char *fmt, | |
| va_list args) | |
| { | |
| return vsnprintf_internal(buf, size, fmt, args); | |
| } | |
| int vscnprintf(char *buf, size_t size, const char *fmt, va_list args) | |
| { | |
| int i; | |
| i = vsnprintf(buf, size, fmt, args); | |
| if (likely(i < size)) | |
| return i; | |
| if (size != 0) | |
| return size - 1; | |
| return 0; | |
| } | |
| int snprintf(char *buf, size_t size, const char *fmt, ...) | |
| { | |
| va_list args; | |
| int i; | |
| va_start(args, fmt); | |
| i = vsnprintf(buf, size, fmt, args); | |
| va_end(args); | |
| return i; | |
| } | |
| int scnprintf(char *buf, size_t size, const char *fmt, ...) | |
| { | |
| va_list args; | |
| int i; | |
| va_start(args, fmt); | |
| i = vscnprintf(buf, size, fmt, args); | |
| va_end(args); | |
| return i; | |
| } | |
| /** | |
| * Format a string and place it in a buffer (va_list version) | |
| * | |
| * @param buf The buffer to place the result into | |
| * @param fmt The format string to use | |
| * @param args Arguments for the format string | |
| * | |
| * The function returns the number of characters written | |
| * into @buf. Use vsnprintf() or vscnprintf() in order to avoid | |
| * buffer overflows. | |
| * | |
| * If you're not already dealing with a va_list consider using sprintf(). | |
| */ | |
| int vsprintf(char *buf, const char *fmt, va_list args) | |
| { | |
| return vsnprintf_internal(buf, INT_MAX, fmt, args); | |
| } | |
| int sprintf(char *buf, const char *fmt, ...) | |
| { | |
| va_list args; | |
| int i; | |
| va_start(args, fmt); | |
| i = vsprintf(buf, fmt, args); | |
| va_end(args); | |
| return i; | |
| } | |
| #if CONFIG_IS_ENABLED(PRINTF) | |
| int printf(const char *fmt, ...) | |
| { | |
| va_list args; | |
| uint i; | |
| char printbuffer[CONFIG_SYS_PBSIZE]; | |
| va_start(args, fmt); | |
| /* | |
| * For this to work, printbuffer must be larger than | |
| * anything we ever want to print. | |
| */ | |
| i = vscnprintf(printbuffer, sizeof(printbuffer), fmt, args); | |
| va_end(args); | |
| /* Handle error */ | |
| if (i <= 0) | |
| return i; | |
| /* Print the string */ | |
| puts(printbuffer); | |
| return i; | |
| } | |
| int vprintf(const char *fmt, va_list args) | |
| { | |
| uint i; | |
| char printbuffer[CONFIG_SYS_PBSIZE]; | |
| /* | |
| * For this to work, printbuffer must be larger than | |
| * anything we ever want to print. | |
| */ | |
| i = vscnprintf(printbuffer, sizeof(printbuffer), fmt, args); | |
| /* Handle error */ | |
| if (i <= 0) | |
| return i; | |
| /* Print the string */ | |
| puts(printbuffer); | |
| return i; | |
| } | |
| #endif | |
| char *simple_itoa(ulong i) | |
| { | |
| /* 21 digits plus null terminator, good for 64-bit or smaller ints */ | |
| static char local[22]; | |
| char *p = &local[21]; | |
| *p-- = '\0'; | |
| do { | |
| *p-- = '0' + i % 10; | |
| i /= 10; | |
| } while (i > 0); | |
| return p + 1; | |
| } | |
| /* We don't seem to have %'d in U-Boot */ | |
| void print_grouped_ull(unsigned long long int_val, int digits) | |
| { | |
| char str[21], *s; | |
| int grab = 3; | |
| digits = (digits + 2) / 3; | |
| sprintf(str, "%*llu", digits * 3, int_val); | |
| for (s = str; *s; s += grab) { | |
| if (s != str) | |
| putc(s[-1] != ' ' ? ',' : ' '); | |
| printf("%.*s", grab, s); | |
| grab = 3; | |
| } | |
| } | |
| bool str2off(const char *p, loff_t *num) | |
| { | |
| char *endptr; | |
| *num = simple_strtoull(p, &endptr, 16); | |
| return *p != '\0' && *endptr == '\0'; | |
| } | |
| bool str2long(const char *p, ulong *num) | |
| { | |
| char *endptr; | |
| *num = simple_strtoul(p, &endptr, 16); | |
| return *p != '\0' && *endptr == '\0'; | |
| } |