| CONFIG_ARM=y | |
| CONFIG_TARGET_LS2080ARDB=y | |
| CONFIG_SYS_TEXT_BASE=0x80400000 | |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y | |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y | |
| CONFIG_SPL_SERIAL_SUPPORT=y | |
| CONFIG_SPL_DRIVERS_MISC_SUPPORT=y | |
| CONFIG_NR_DRAM_BANKS=3 | |
| CONFIG_SPL=y | |
| CONFIG_AHCI=y | |
| CONFIG_FIT=y | |
| CONFIG_FIT_VERBOSE=y | |
| CONFIG_OF_BOARD_SETUP=y | |
| CONFIG_OF_STDOUT_VIA_ALIAS=y | |
| CONFIG_NAND_BOOT=y | |
| CONFIG_BOOTDELAY=10 | |
| CONFIG_USE_BOOTARGS=y | |
| CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" | |
| # CONFIG_USE_BOOTCOMMAND is not set | |
| CONFIG_MISC_INIT_R=y | |
| CONFIG_SPL_TEXT_BASE=0x1800a000 | |
| CONFIG_SPL_ENV_SUPPORT=y | |
| CONFIG_SPL_I2C_SUPPORT=y | |
| CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y | |
| CONFIG_SPL_NAND_SUPPORT=y | |
| CONFIG_CMD_IMLS=y | |
| CONFIG_CMD_GREPENV=y | |
| CONFIG_CMD_EEPROM=y | |
| CONFIG_CMD_GPT=y | |
| CONFIG_CMD_I2C=y | |
| CONFIG_CMD_MMC=y | |
| CONFIG_CMD_NAND=y | |
| CONFIG_CMD_PCI=y | |
| CONFIG_CMD_USB=y | |
| # CONFIG_CMD_SETEXPR is not set | |
| CONFIG_CMD_CACHE=y | |
| CONFIG_CMD_DATE=y | |
| CONFIG_MP=y | |
| CONFIG_OF_CONTROL=y | |
| CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" | |
| CONFIG_ENV_IS_IN_NAND=y | |
| CONFIG_NET_RANDOM_ETHADDR=y | |
| CONFIG_DM=y | |
| CONFIG_SATA_CEVA=y | |
| CONFIG_FSL_CAAM=y | |
| CONFIG_DM_MMC=y | |
| CONFIG_FSL_ESDHC=y | |
| CONFIG_MTD_NOR_FLASH=y | |
| CONFIG_FLASH_CFI_DRIVER=y | |
| CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y | |
| CONFIG_SYS_FLASH_CFI=y | |
| CONFIG_PHYLIB=y | |
| CONFIG_PHY_AQUANTIA=y | |
| CONFIG_E1000=y | |
| CONFIG_MII=y | |
| CONFIG_PCI=y | |
| CONFIG_DM_PCI=y | |
| CONFIG_DM_PCI_COMPAT=y | |
| CONFIG_PCIE_LAYERSCAPE=y | |
| CONFIG_DM_SCSI=y | |
| CONFIG_CONS_INDEX=2 | |
| CONFIG_SYS_NS16550=y | |
| CONFIG_USB=y | |
| CONFIG_DM_USB=y | |
| CONFIG_USB_XHCI_HCD=y | |
| CONFIG_USB_XHCI_DWC3=y | |
| CONFIG_EFI_LOADER_BOUNCE_BUFFER=y |