| /*********************************************************************** | |
| * | |
| * (C) Copyright 2004 | |
| * DENX Software Engineering | |
| * Wolfgang Denk, wd@denx.de | |
| * All rights reserved. | |
| * | |
| * PS/2 multiplexer driver | |
| * | |
| * Originally from linux source (drivers/char/ps2mult.c) | |
| * | |
| * Uses simple serial driver (ps2ser.c) to access the multiplexer | |
| * Used by PS/2 keyboard driver (pc_keyb.c) | |
| * | |
| ***********************************************************************/ | |
| #include <common.h> | |
| #include <pc_keyb.h> | |
| #include <asm/atomic.h> | |
| #include <ps2mult.h> | |
| /* #define DEBUG_MULT */ | |
| /* #define DEBUG_KEYB */ | |
| #define KBD_STAT_DEFAULT (KBD_STAT_SELFTEST | KBD_STAT_UNLOCKED) | |
| #define PRINTF(format, args...) printf("ps2mult.c: " format, ## args) | |
| #ifdef DEBUG_MULT | |
| #define PRINTF_MULT(format, args...) printf("PS2MULT: " format, ## args) | |
| #else | |
| #define PRINTF_MULT(format, args...) | |
| #endif | |
| #ifdef DEBUG_KEYB | |
| #define PRINTF_KEYB(format, args...) printf("KEYB: " format, ## args) | |
| #else | |
| #define PRINTF_KEYB(format, args...) | |
| #endif | |
| static ulong start_time; | |
| static int init_done = 0; | |
| static int received_escape = 0; | |
| static int received_bsync = 0; | |
| static int received_selector = 0; | |
| static int kbd_command_active = 0; | |
| static int mouse_command_active = 0; | |
| static int ctl_command_active = 0; | |
| static u_char command_byte = 0; | |
| static void (*keyb_handler)(void *dev_id); | |
| static u_char ps2mult_buf [PS2BUF_SIZE]; | |
| static atomic_t ps2mult_buf_cnt; | |
| static int ps2mult_buf_in_idx; | |
| static int ps2mult_buf_out_idx; | |
| static u_char ps2mult_buf_status [PS2BUF_SIZE]; | |
| #ifndef CONFIG_BOARD_EARLY_INIT_R | |
| #error #define CONFIG_BOARD_EARLY_INIT_R and call ps2mult_early_init() in board_early_init_r() | |
| #endif | |
| void ps2mult_early_init (void) | |
| { | |
| start_time = get_timer(0); | |
| } | |
| static void ps2mult_send_byte(u_char byte, u_char sel) | |
| { | |
| ps2ser_putc(sel); | |
| if (sel == PS2MULT_KB_SELECTOR) { | |
| PRINTF_MULT("0x%02x send KEYBOARD\n", byte); | |
| kbd_command_active = 1; | |
| } else { | |
| PRINTF_MULT("0x%02x send MOUSE\n", byte); | |
| mouse_command_active = 1; | |
| } | |
| switch (byte) { | |
| case PS2MULT_ESCAPE: | |
| case PS2MULT_BSYNC: | |
| case PS2MULT_KB_SELECTOR: | |
| case PS2MULT_MS_SELECTOR: | |
| case PS2MULT_SESSION_START: | |
| case PS2MULT_SESSION_END: | |
| ps2ser_putc(PS2MULT_ESCAPE); | |
| break; | |
| default: | |
| break; | |
| } | |
| ps2ser_putc(byte); | |
| } | |
| static void ps2mult_receive_byte(u_char byte, u_char sel) | |
| { | |
| u_char status = KBD_STAT_DEFAULT; | |
| #if 1 /* Ignore mouse in U-Boot */ | |
| if (sel == PS2MULT_MS_SELECTOR) return; | |
| #endif | |
| if (sel == PS2MULT_KB_SELECTOR) { | |
| if (kbd_command_active) { | |
| if (!received_bsync) { | |
| PRINTF_MULT("0x%02x lost KEYBOARD !!!\n", byte); | |
| return; | |
| } else { | |
| kbd_command_active = 0; | |
| received_bsync = 0; | |
| } | |
| } | |
| PRINTF_MULT("0x%02x receive KEYBOARD\n", byte); | |
| status |= KBD_STAT_IBF | KBD_STAT_OBF; | |
| } else { | |
| if (mouse_command_active) { | |
| if (!received_bsync) { | |
| PRINTF_MULT("0x%02x lost MOUSE !!!\n", byte); | |
| return; | |
| } else { | |
| mouse_command_active = 0; | |
| received_bsync = 0; | |
| } | |
| } | |
| PRINTF_MULT("0x%02x receive MOUSE\n", byte); | |
| status |= KBD_STAT_IBF | KBD_STAT_OBF | KBD_STAT_MOUSE_OBF; | |
| } | |
| if (atomic_read(&ps2mult_buf_cnt) < PS2BUF_SIZE) { | |
| ps2mult_buf_status[ps2mult_buf_in_idx] = status; | |
| ps2mult_buf[ps2mult_buf_in_idx++] = byte; | |
| ps2mult_buf_in_idx &= (PS2BUF_SIZE - 1); | |
| atomic_inc(&ps2mult_buf_cnt); | |
| } else { | |
| PRINTF("buffer overflow\n"); | |
| } | |
| if (received_bsync) { | |
| PRINTF("unexpected BSYNC\n"); | |
| received_bsync = 0; | |
| } | |
| } | |
| void ps2mult_callback (int in_cnt) | |
| { | |
| int i; | |
| u_char byte; | |
| static int keyb_handler_active = 0; | |
| if (!init_done) { | |
| return; | |
| } | |
| for (i = 0; i < in_cnt; i ++) { | |
| byte = ps2ser_getc(); | |
| if (received_escape) { | |
| ps2mult_receive_byte(byte, received_selector); | |
| received_escape = 0; | |
| } else switch (byte) { | |
| case PS2MULT_ESCAPE: | |
| PRINTF_MULT("ESCAPE receive\n"); | |
| received_escape = 1; | |
| break; | |
| case PS2MULT_BSYNC: | |
| PRINTF_MULT("BSYNC receive\n"); | |
| received_bsync = 1; | |
| break; | |
| case PS2MULT_KB_SELECTOR: | |
| case PS2MULT_MS_SELECTOR: | |
| PRINTF_MULT("%s receive\n", | |
| byte == PS2MULT_KB_SELECTOR ? "KB_SEL" : "MS_SEL"); | |
| received_selector = byte; | |
| break; | |
| case PS2MULT_SESSION_START: | |
| case PS2MULT_SESSION_END: | |
| PRINTF_MULT("%s receive\n", | |
| byte == PS2MULT_SESSION_START ? | |
| "SESSION_START" : "SESSION_END"); | |
| break; | |
| default: | |
| ps2mult_receive_byte(byte, received_selector); | |
| } | |
| } | |
| if (keyb_handler && !keyb_handler_active && | |
| atomic_read(&ps2mult_buf_cnt)) { | |
| keyb_handler_active = 1; | |
| keyb_handler(NULL); | |
| keyb_handler_active = 0; | |
| } | |
| } | |
| u_char ps2mult_read_status(void) | |
| { | |
| u_char byte; | |
| if (atomic_read(&ps2mult_buf_cnt) == 0) { | |
| ps2ser_check(); | |
| } | |
| if (atomic_read(&ps2mult_buf_cnt)) { | |
| byte = ps2mult_buf_status[ps2mult_buf_out_idx]; | |
| } else { | |
| byte = KBD_STAT_DEFAULT; | |
| } | |
| PRINTF_KEYB("read_status()=0x%02x\n", byte); | |
| return byte; | |
| } | |
| u_char ps2mult_read_input(void) | |
| { | |
| u_char byte = 0; | |
| if (atomic_read(&ps2mult_buf_cnt) == 0) { | |
| ps2ser_check(); | |
| } | |
| if (atomic_read(&ps2mult_buf_cnt)) { | |
| byte = ps2mult_buf[ps2mult_buf_out_idx++]; | |
| ps2mult_buf_out_idx &= (PS2BUF_SIZE - 1); | |
| atomic_dec(&ps2mult_buf_cnt); | |
| } | |
| PRINTF_KEYB("read_input()=0x%02x\n", byte); | |
| return byte; | |
| } | |
| void ps2mult_write_output(u_char val) | |
| { | |
| int i; | |
| PRINTF_KEYB("write_output(0x%02x)\n", val); | |
| for (i = 0; i < KBD_TIMEOUT; i++) { | |
| if (!kbd_command_active && !mouse_command_active) { | |
| break; | |
| } | |
| udelay(1000); | |
| ps2ser_check(); | |
| } | |
| if (kbd_command_active) { | |
| PRINTF("keyboard command not acknoledged\n"); | |
| kbd_command_active = 0; | |
| } | |
| if (mouse_command_active) { | |
| PRINTF("mouse command not acknoledged\n"); | |
| mouse_command_active = 0; | |
| } | |
| if (ctl_command_active) { | |
| switch (ctl_command_active) { | |
| case KBD_CCMD_WRITE_MODE: | |
| /* Scan code conversion not supported */ | |
| command_byte = val & ~KBD_MODE_KCC; | |
| break; | |
| case KBD_CCMD_WRITE_AUX_OBUF: | |
| ps2mult_receive_byte(val, PS2MULT_MS_SELECTOR); | |
| break; | |
| case KBD_CCMD_WRITE_MOUSE: | |
| ps2mult_send_byte(val, PS2MULT_MS_SELECTOR); | |
| break; | |
| default: | |
| PRINTF("invalid controller command\n"); | |
| break; | |
| } | |
| ctl_command_active = 0; | |
| return; | |
| } | |
| ps2mult_send_byte(val, PS2MULT_KB_SELECTOR); | |
| } | |
| void ps2mult_write_command(u_char val) | |
| { | |
| ctl_command_active = 0; | |
| PRINTF_KEYB("write_command(0x%02x)\n", val); | |
| switch (val) { | |
| case KBD_CCMD_READ_MODE: | |
| ps2mult_receive_byte(command_byte, PS2MULT_KB_SELECTOR); | |
| break; | |
| case KBD_CCMD_WRITE_MODE: | |
| ctl_command_active = val; | |
| break; | |
| case KBD_CCMD_MOUSE_DISABLE: | |
| break; | |
| case KBD_CCMD_MOUSE_ENABLE: | |
| break; | |
| case KBD_CCMD_SELF_TEST: | |
| ps2mult_receive_byte(0x55, PS2MULT_KB_SELECTOR); | |
| break; | |
| case KBD_CCMD_KBD_TEST: | |
| ps2mult_receive_byte(0x00, PS2MULT_KB_SELECTOR); | |
| break; | |
| case KBD_CCMD_KBD_DISABLE: | |
| break; | |
| case KBD_CCMD_KBD_ENABLE: | |
| break; | |
| case KBD_CCMD_WRITE_AUX_OBUF: | |
| ctl_command_active = val; | |
| break; | |
| case KBD_CCMD_WRITE_MOUSE: | |
| ctl_command_active = val; | |
| break; | |
| default: | |
| PRINTF("invalid controller command\n"); | |
| break; | |
| } | |
| } | |
| static int ps2mult_getc_w (void) | |
| { | |
| int res = -1; | |
| int i; | |
| for (i = 0; i < KBD_TIMEOUT; i++) { | |
| if (ps2ser_check()) { | |
| res = ps2ser_getc(); | |
| break; | |
| } | |
| udelay(1000); | |
| } | |
| switch (res) { | |
| case PS2MULT_KB_SELECTOR: | |
| case PS2MULT_MS_SELECTOR: | |
| received_selector = res; | |
| break; | |
| default: | |
| break; | |
| } | |
| return res; | |
| } | |
| int ps2mult_init (void) | |
| { | |
| int byte; | |
| int kbd_found = 0; | |
| int mouse_found = 0; | |
| while (get_timer(start_time) < CONFIG_PS2MULT_DELAY); | |
| ps2ser_init(); | |
| ps2ser_putc(PS2MULT_SESSION_START); | |
| ps2ser_putc(PS2MULT_KB_SELECTOR); | |
| ps2ser_putc(KBD_CMD_RESET); | |
| do { | |
| byte = ps2mult_getc_w(); | |
| } while (byte >= 0 && byte != KBD_REPLY_ACK); | |
| if (byte == KBD_REPLY_ACK) { | |
| byte = ps2mult_getc_w(); | |
| if (byte == 0xaa) { | |
| kbd_found = 1; | |
| puts("keyboard"); | |
| } | |
| } | |
| if (!kbd_found) { | |
| while (byte >= 0) { | |
| byte = ps2mult_getc_w(); | |
| } | |
| } | |
| #if 1 /* detect mouse */ | |
| ps2ser_putc(PS2MULT_MS_SELECTOR); | |
| ps2ser_putc(AUX_RESET); | |
| do { | |
| byte = ps2mult_getc_w(); | |
| } while (byte >= 0 && byte != AUX_ACK); | |
| if (byte == AUX_ACK) { | |
| byte = ps2mult_getc_w(); | |
| if (byte == 0xaa) { | |
| byte = ps2mult_getc_w(); | |
| if (byte == 0x00) { | |
| mouse_found = 1; | |
| puts(", mouse"); | |
| } | |
| } | |
| } | |
| if (!mouse_found) { | |
| while (byte >= 0) { | |
| byte = ps2mult_getc_w(); | |
| } | |
| } | |
| #endif | |
| if (mouse_found || kbd_found) { | |
| if (!received_selector) { | |
| if (mouse_found) { | |
| received_selector = PS2MULT_MS_SELECTOR; | |
| } else { | |
| received_selector = PS2MULT_KB_SELECTOR; | |
| } | |
| } | |
| init_done = 1; | |
| } else { | |
| puts("No device found"); | |
| } | |
| puts("\n"); | |
| #if 0 /* for testing */ | |
| { | |
| int i; | |
| u_char key[] = { | |
| 0x1f, 0x12, 0x14, 0x12, 0x31, 0x2f, 0x39, /* setenv */ | |
| 0x1f, 0x14, 0x20, 0x17, 0x31, 0x39, /* stdin */ | |
| 0x1f, 0x12, 0x13, 0x17, 0x1e, 0x26, 0x1c, /* serial */ | |
| }; | |
| for (i = 0; i < sizeof (key); i++) { | |
| ps2mult_receive_byte (key[i], PS2MULT_KB_SELECTOR); | |
| ps2mult_receive_byte (key[i] | 0x80, PS2MULT_KB_SELECTOR); | |
| } | |
| } | |
| #endif | |
| return init_done ? 0 : -1; | |
| } | |
| int ps2mult_request_irq(void (*handler)(void *)) | |
| { | |
| keyb_handler = handler; | |
| return 0; | |
| } |