| /* | |
| * Unsorted Block Image commands | |
| * | |
| * Copyright (C) 2008 Samsung Electronics | |
| * Kyungmin Park <kyungmin.park@samsung.com> | |
| * | |
| * Copyright 2008-2009 Stefan Roese <sr@denx.de>, DENX Software Engineering | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <common.h> | |
| #include <command.h> | |
| #include <exports.h> | |
| #include <memalign.h> | |
| #include <nand.h> | |
| #include <onenand_uboot.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <linux/err.h> | |
| #include <ubi_uboot.h> | |
| #include <linux/errno.h> | |
| #include <jffs2/load_kernel.h> | |
| #undef ubi_msg | |
| #define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__) | |
| #define DEV_TYPE_NONE 0 | |
| #define DEV_TYPE_NAND 1 | |
| #define DEV_TYPE_ONENAND 2 | |
| #define DEV_TYPE_NOR 3 | |
| /* Private own data */ | |
| static struct ubi_device *ubi; | |
| static char buffer[80]; | |
| static int ubi_initialized; | |
| struct selected_dev { | |
| char part_name[80]; | |
| int selected; | |
| int nr; | |
| struct mtd_info *mtd_info; | |
| }; | |
| static struct selected_dev ubi_dev; | |
| #ifdef CONFIG_CMD_UBIFS | |
| int ubifs_is_mounted(void); | |
| void cmd_ubifs_umount(void); | |
| #endif | |
| static void display_volume_info(struct ubi_device *ubi) | |
| { | |
| int i; | |
| for (i = 0; i < (ubi->vtbl_slots + 1); i++) { | |
| if (!ubi->volumes[i]) | |
| continue; /* Empty record */ | |
| ubi_dump_vol_info(ubi->volumes[i]); | |
| } | |
| } | |
| static void display_ubi_info(struct ubi_device *ubi) | |
| { | |
| ubi_msg("MTD device name: \"%s\"", ubi->mtd->name); | |
| ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20); | |
| ubi_msg("physical eraseblock size: %d bytes (%d KiB)", | |
| ubi->peb_size, ubi->peb_size >> 10); | |
| ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size); | |
| ubi_msg("number of good PEBs: %d", ubi->good_peb_count); | |
| ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count); | |
| ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size); | |
| ubi_msg("VID header offset: %d (aligned %d)", | |
| ubi->vid_hdr_offset, ubi->vid_hdr_aloffset); | |
| ubi_msg("data offset: %d", ubi->leb_start); | |
| ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots); | |
| ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD); | |
| ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT); | |
| ubi_msg("number of user volumes: %d", | |
| ubi->vol_count - UBI_INT_VOL_COUNT); | |
| ubi_msg("available PEBs: %d", ubi->avail_pebs); | |
| ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs); | |
| ubi_msg("number of PEBs reserved for bad PEB handling: %d", | |
| ubi->beb_rsvd_pebs); | |
| ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); | |
| } | |
| static int ubi_info(int layout) | |
| { | |
| if (layout) | |
| display_volume_info(ubi); | |
| else | |
| display_ubi_info(ubi); | |
| return 0; | |
| } | |
| static int ubi_check_volumename(const struct ubi_volume *vol, char *name) | |
| { | |
| return strcmp(vol->name, name); | |
| } | |
| static int ubi_check(char *name) | |
| { | |
| int i; | |
| for (i = 0; i < (ubi->vtbl_slots + 1); i++) { | |
| if (!ubi->volumes[i]) | |
| continue; /* Empty record */ | |
| if (!ubi_check_volumename(ubi->volumes[i], name)) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int verify_mkvol_req(const struct ubi_device *ubi, | |
| const struct ubi_mkvol_req *req) | |
| { | |
| int n, err = EINVAL; | |
| if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 || | |
| req->name_len < 0) | |
| goto bad; | |
| if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) && | |
| req->vol_id != UBI_VOL_NUM_AUTO) | |
| goto bad; | |
| if (req->alignment == 0) | |
| goto bad; | |
| if (req->bytes == 0) { | |
| printf("No space left in UBI device!\n"); | |
| err = ENOMEM; | |
| goto bad; | |
| } | |
| if (req->vol_type != UBI_DYNAMIC_VOLUME && | |
| req->vol_type != UBI_STATIC_VOLUME) | |
| goto bad; | |
| if (req->alignment > ubi->leb_size) | |
| goto bad; | |
| n = req->alignment % ubi->min_io_size; | |
| if (req->alignment != 1 && n) | |
| goto bad; | |
| if (req->name_len > UBI_VOL_NAME_MAX) { | |
| printf("Name too long!\n"); | |
| err = ENAMETOOLONG; | |
| goto bad; | |
| } | |
| return 0; | |
| bad: | |
| return err; | |
| } | |
| static int ubi_create_vol(char *volume, int64_t size, int dynamic, int vol_id) | |
| { | |
| struct ubi_mkvol_req req; | |
| int err; | |
| if (dynamic) | |
| req.vol_type = UBI_DYNAMIC_VOLUME; | |
| else | |
| req.vol_type = UBI_STATIC_VOLUME; | |
| req.vol_id = vol_id; | |
| req.alignment = 1; | |
| req.bytes = size; | |
| strcpy(req.name, volume); | |
| req.name_len = strlen(volume); | |
| req.name[req.name_len] = '\0'; | |
| req.padding1 = 0; | |
| /* It's duplicated at drivers/mtd/ubi/cdev.c */ | |
| err = verify_mkvol_req(ubi, &req); | |
| if (err) { | |
| printf("verify_mkvol_req failed %d\n", err); | |
| return err; | |
| } | |
| printf("Creating %s volume %s of size %lld\n", | |
| dynamic ? "dynamic" : "static", volume, size); | |
| /* Call real ubi create volume */ | |
| return ubi_create_volume(ubi, &req); | |
| } | |
| static struct ubi_volume *ubi_find_volume(char *volume) | |
| { | |
| struct ubi_volume *vol = NULL; | |
| int i; | |
| for (i = 0; i < ubi->vtbl_slots; i++) { | |
| vol = ubi->volumes[i]; | |
| if (vol && !strcmp(vol->name, volume)) | |
| return vol; | |
| } | |
| printf("Volume %s not found!\n", volume); | |
| return NULL; | |
| } | |
| static int ubi_remove_vol(char *volume) | |
| { | |
| int err, reserved_pebs, i; | |
| struct ubi_volume *vol; | |
| vol = ubi_find_volume(volume); | |
| if (vol == NULL) | |
| return ENODEV; | |
| printf("Remove UBI volume %s (id %d)\n", vol->name, vol->vol_id); | |
| if (ubi->ro_mode) { | |
| printf("It's read-only mode\n"); | |
| err = EROFS; | |
| goto out_err; | |
| } | |
| err = ubi_change_vtbl_record(ubi, vol->vol_id, NULL); | |
| if (err) { | |
| printf("Error changing Vol tabel record err=%x\n", err); | |
| goto out_err; | |
| } | |
| reserved_pebs = vol->reserved_pebs; | |
| for (i = 0; i < vol->reserved_pebs; i++) { | |
| err = ubi_eba_unmap_leb(ubi, vol, i); | |
| if (err) | |
| goto out_err; | |
| } | |
| kfree(vol->eba_tbl); | |
| ubi->volumes[vol->vol_id]->eba_tbl = NULL; | |
| ubi->volumes[vol->vol_id] = NULL; | |
| ubi->rsvd_pebs -= reserved_pebs; | |
| ubi->avail_pebs += reserved_pebs; | |
| i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs; | |
| if (i > 0) { | |
| i = ubi->avail_pebs >= i ? i : ubi->avail_pebs; | |
| ubi->avail_pebs -= i; | |
| ubi->rsvd_pebs += i; | |
| ubi->beb_rsvd_pebs += i; | |
| if (i > 0) | |
| ubi_msg("reserve more %d PEBs", i); | |
| } | |
| ubi->vol_count -= 1; | |
| return 0; | |
| out_err: | |
| ubi_err(ubi, "cannot remove volume %s, error %d", volume, err); | |
| if (err < 0) | |
| err = -err; | |
| return err; | |
| } | |
| static int ubi_volume_continue_write(char *volume, void *buf, size_t size) | |
| { | |
| int err = 1; | |
| struct ubi_volume *vol; | |
| vol = ubi_find_volume(volume); | |
| if (vol == NULL) | |
| return ENODEV; | |
| err = ubi_more_update_data(ubi, vol, buf, size); | |
| if (err < 0) { | |
| printf("Couldnt or partially wrote data\n"); | |
| return -err; | |
| } | |
| if (err) { | |
| size = err; | |
| err = ubi_check_volume(ubi, vol->vol_id); | |
| if (err < 0) | |
| return -err; | |
| if (err) { | |
| ubi_warn(ubi, "volume %d on UBI device %d is corrupt", | |
| vol->vol_id, ubi->ubi_num); | |
| vol->corrupted = 1; | |
| } | |
| vol->checked = 1; | |
| ubi_gluebi_updated(vol); | |
| } | |
| return 0; | |
| } | |
| int ubi_volume_begin_write(char *volume, void *buf, size_t size, | |
| size_t full_size) | |
| { | |
| int err = 1; | |
| int rsvd_bytes = 0; | |
| struct ubi_volume *vol; | |
| vol = ubi_find_volume(volume); | |
| if (vol == NULL) | |
| return ENODEV; | |
| rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad); | |
| if (size > rsvd_bytes) { | |
| printf("size > volume size! Aborting!\n"); | |
| return EINVAL; | |
| } | |
| err = ubi_start_update(ubi, vol, full_size); | |
| if (err < 0) { | |
| printf("Cannot start volume update\n"); | |
| return -err; | |
| } | |
| return ubi_volume_continue_write(volume, buf, size); | |
| } | |
| int ubi_volume_write(char *volume, void *buf, size_t size) | |
| { | |
| return ubi_volume_begin_write(volume, buf, size, size); | |
| } | |
| int ubi_volume_read(char *volume, char *buf, size_t size) | |
| { | |
| int err, lnum, off, len, tbuf_size; | |
| void *tbuf; | |
| unsigned long long tmp; | |
| struct ubi_volume *vol; | |
| loff_t offp = 0; | |
| vol = ubi_find_volume(volume); | |
| if (vol == NULL) | |
| return ENODEV; | |
| if (vol->updating) { | |
| printf("updating"); | |
| return EBUSY; | |
| } | |
| if (vol->upd_marker) { | |
| printf("damaged volume, update marker is set"); | |
| return EBADF; | |
| } | |
| if (offp == vol->used_bytes) | |
| return 0; | |
| if (size == 0) { | |
| printf("No size specified -> Using max size (%lld)\n", vol->used_bytes); | |
| size = vol->used_bytes; | |
| } | |
| if (vol->corrupted) | |
| printf("read from corrupted volume %d", vol->vol_id); | |
| if (offp + size > vol->used_bytes) | |
| size = vol->used_bytes - offp; | |
| tbuf_size = vol->usable_leb_size; | |
| if (size < tbuf_size) | |
| tbuf_size = ALIGN(size, ubi->min_io_size); | |
| tbuf = malloc_cache_aligned(tbuf_size); | |
| if (!tbuf) { | |
| printf("NO MEM\n"); | |
| return ENOMEM; | |
| } | |
| len = size > tbuf_size ? tbuf_size : size; | |
| tmp = offp; | |
| off = do_div(tmp, vol->usable_leb_size); | |
| lnum = tmp; | |
| do { | |
| if (off + len >= vol->usable_leb_size) | |
| len = vol->usable_leb_size - off; | |
| err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0); | |
| if (err) { | |
| printf("read err %x\n", err); | |
| err = -err; | |
| break; | |
| } | |
| off += len; | |
| if (off == vol->usable_leb_size) { | |
| lnum += 1; | |
| off -= vol->usable_leb_size; | |
| } | |
| size -= len; | |
| offp += len; | |
| memcpy(buf, tbuf, len); | |
| buf += len; | |
| len = size > tbuf_size ? tbuf_size : size; | |
| } while (size); | |
| free(tbuf); | |
| return err; | |
| } | |
| static int ubi_dev_scan(struct mtd_info *info, char *ubidev, | |
| const char *vid_header_offset) | |
| { | |
| struct mtd_device *dev; | |
| struct part_info *part; | |
| struct mtd_partition mtd_part; | |
| char ubi_mtd_param_buffer[80]; | |
| u8 pnum; | |
| int err; | |
| if (find_dev_and_part(ubidev, &dev, &pnum, &part) != 0) | |
| return 1; | |
| sprintf(buffer, "mtd=%d", pnum); | |
| memset(&mtd_part, 0, sizeof(mtd_part)); | |
| mtd_part.name = buffer; | |
| mtd_part.size = part->size; | |
| mtd_part.offset = part->offset; | |
| add_mtd_partitions(info, &mtd_part, 1); | |
| strcpy(ubi_mtd_param_buffer, buffer); | |
| if (vid_header_offset) | |
| sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum, | |
| vid_header_offset); | |
| err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL); | |
| if (err) { | |
| del_mtd_partitions(info); | |
| return -err; | |
| } | |
| err = ubi_init(); | |
| if (err) { | |
| del_mtd_partitions(info); | |
| return -err; | |
| } | |
| ubi_initialized = 1; | |
| return 0; | |
| } | |
| int ubi_detach(void) | |
| { | |
| if (mtdparts_init() != 0) { | |
| printf("Error initializing mtdparts!\n"); | |
| return 1; | |
| } | |
| #ifdef CONFIG_CMD_UBIFS | |
| /* | |
| * Automatically unmount UBIFS partition when user | |
| * changes the UBI device. Otherwise the following | |
| * UBIFS commands will crash. | |
| */ | |
| if (ubifs_is_mounted()) | |
| cmd_ubifs_umount(); | |
| #endif | |
| /* | |
| * Call ubi_exit() before re-initializing the UBI subsystem | |
| */ | |
| if (ubi_initialized) { | |
| ubi_exit(); | |
| del_mtd_partitions(ubi_dev.mtd_info); | |
| ubi_initialized = 0; | |
| } | |
| ubi_dev.selected = 0; | |
| return 0; | |
| } | |
| int ubi_part(char *part_name, const char *vid_header_offset) | |
| { | |
| int err = 0; | |
| char mtd_dev[16]; | |
| struct mtd_device *dev; | |
| struct part_info *part; | |
| u8 pnum; | |
| ubi_detach(); | |
| /* | |
| * Search the mtd device number where this partition | |
| * is located | |
| */ | |
| if (find_dev_and_part(part_name, &dev, &pnum, &part)) { | |
| printf("Partition %s not found!\n", part_name); | |
| return 1; | |
| } | |
| sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num); | |
| ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev); | |
| if (IS_ERR(ubi_dev.mtd_info)) { | |
| printf("Partition %s not found on device %s!\n", part_name, | |
| mtd_dev); | |
| return 1; | |
| } | |
| ubi_dev.selected = 1; | |
| strcpy(ubi_dev.part_name, part_name); | |
| err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name, | |
| vid_header_offset); | |
| if (err) { | |
| printf("UBI init error %d\n", err); | |
| ubi_dev.selected = 0; | |
| return err; | |
| } | |
| ubi = ubi_devices[0]; | |
| return 0; | |
| } | |
| static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | |
| { | |
| int64_t size = 0; | |
| ulong addr = 0; | |
| if (argc < 2) | |
| return CMD_RET_USAGE; | |
| if (strcmp(argv[1], "detach") == 0) { | |
| if (argc < 2) | |
| return CMD_RET_USAGE; | |
| return ubi_detach(); | |
| } | |
| if (strcmp(argv[1], "part") == 0) { | |
| const char *vid_header_offset = NULL; | |
| /* Print current partition */ | |
| if (argc == 2) { | |
| if (!ubi_dev.selected) { | |
| printf("Error, no UBI device/partition selected!\n"); | |
| return 1; | |
| } | |
| printf("Device %d: %s, partition %s\n", | |
| ubi_dev.nr, ubi_dev.mtd_info->name, ubi_dev.part_name); | |
| return 0; | |
| } | |
| if (argc < 3) | |
| return CMD_RET_USAGE; | |
| if (argc > 3) | |
| vid_header_offset = argv[3]; | |
| return ubi_part(argv[2], vid_header_offset); | |
| } | |
| if ((strcmp(argv[1], "part") != 0) && (!ubi_dev.selected)) { | |
| printf("Error, no UBI device/partition selected!\n"); | |
| return 1; | |
| } | |
| if (strcmp(argv[1], "info") == 0) { | |
| int layout = 0; | |
| if (argc > 2 && !strncmp(argv[2], "l", 1)) | |
| layout = 1; | |
| return ubi_info(layout); | |
| } | |
| if (strcmp(argv[1], "check") == 0) { | |
| if (argc > 2) | |
| return ubi_check(argv[2]); | |
| printf("Error, no volume name passed\n"); | |
| return 1; | |
| } | |
| if (strncmp(argv[1], "create", 6) == 0) { | |
| int dynamic = 1; /* default: dynamic volume */ | |
| int id = UBI_VOL_NUM_AUTO; | |
| /* Use maximum available size */ | |
| size = 0; | |
| /* E.g., create volume size type vol_id */ | |
| if (argc == 6) { | |
| id = simple_strtoull(argv[5], NULL, 16); | |
| argc--; | |
| } | |
| /* E.g., create volume size type */ | |
| if (argc == 5) { | |
| if (strncmp(argv[4], "s", 1) == 0) | |
| dynamic = 0; | |
| else if (strncmp(argv[4], "d", 1) != 0) { | |
| printf("Incorrect type\n"); | |
| return 1; | |
| } | |
| argc--; | |
| } | |
| /* E.g., create volume size */ | |
| if (argc == 4) { | |
| if (argv[3][0] != '-') | |
| size = simple_strtoull(argv[3], NULL, 16); | |
| argc--; | |
| } | |
| /* Use maximum available size */ | |
| if (!size) { | |
| size = (int64_t)ubi->avail_pebs * ubi->leb_size; | |
| printf("No size specified -> Using max size (%lld)\n", size); | |
| } | |
| /* E.g., create volume */ | |
| if (argc == 3) | |
| return ubi_create_vol(argv[2], size, dynamic, id); | |
| } | |
| if (strncmp(argv[1], "remove", 6) == 0) { | |
| /* E.g., remove volume */ | |
| if (argc == 3) | |
| return ubi_remove_vol(argv[2]); | |
| } | |
| if (strncmp(argv[1], "write", 5) == 0) { | |
| int ret; | |
| if (argc < 5) { | |
| printf("Please see usage\n"); | |
| return 1; | |
| } | |
| addr = simple_strtoul(argv[2], NULL, 16); | |
| size = simple_strtoul(argv[4], NULL, 16); | |
| if (strlen(argv[1]) == 10 && | |
| strncmp(argv[1] + 5, ".part", 5) == 0) { | |
| if (argc < 6) { | |
| ret = ubi_volume_continue_write(argv[3], | |
| (void *)addr, size); | |
| } else { | |
| size_t full_size; | |
| full_size = simple_strtoul(argv[5], NULL, 16); | |
| ret = ubi_volume_begin_write(argv[3], | |
| (void *)addr, size, full_size); | |
| } | |
| } else { | |
| ret = ubi_volume_write(argv[3], (void *)addr, size); | |
| } | |
| if (!ret) { | |
| printf("%lld bytes written to volume %s\n", size, | |
| argv[3]); | |
| } | |
| return ret; | |
| } | |
| if (strncmp(argv[1], "read", 4) == 0) { | |
| size = 0; | |
| /* E.g., read volume size */ | |
| if (argc == 5) { | |
| size = simple_strtoul(argv[4], NULL, 16); | |
| argc--; | |
| } | |
| /* E.g., read volume */ | |
| if (argc == 4) { | |
| addr = simple_strtoul(argv[2], NULL, 16); | |
| argc--; | |
| } | |
| if (argc == 3) { | |
| printf("Read %lld bytes from volume %s to %lx\n", size, | |
| argv[3], addr); | |
| return ubi_volume_read(argv[3], (char *)addr, size); | |
| } | |
| } | |
| printf("Please see usage\n"); | |
| return 1; | |
| } | |
| U_BOOT_CMD( | |
| ubi, 6, 1, do_ubi, | |
| "ubi commands", | |
| "detach" | |
| " - detach ubi from a mtd partition\n" | |
| "ubi part [part] [offset]\n" | |
| " - Show or set current partition (with optional VID" | |
| " header offset)\n" | |
| "ubi info [l[ayout]]" | |
| " - Display volume and ubi layout information\n" | |
| "ubi check volumename" | |
| " - check if volumename exists\n" | |
| "ubi create[vol] volume [size] [type] [id]\n" | |
| " - create volume name with size ('-' for maximum" | |
| " available size)\n" | |
| "ubi write[vol] address volume size" | |
| " - Write volume from address with size\n" | |
| "ubi write.part address volume size [fullsize]\n" | |
| " - Write part of a volume from address\n" | |
| "ubi read[vol] address volume [size]" | |
| " - Read volume to address with size\n" | |
| "ubi remove[vol] volume" | |
| " - Remove volume\n" | |
| "[Legends]\n" | |
| " volume: character name\n" | |
| " size: specified in bytes\n" | |
| " type: s[tatic] or d[ynamic] (default=dynamic)" | |
| ); |