include/configs/ma5d4evk.h - u-boot - Git at Google


            
            /*

            
             * Aries MA5D4 configuration

            
             * Copyright (C) 2015 Marek Vasut <marex@denx.de>

            
             *

            
             * SPDX-License-Identifier:	GPL-2.0+

            
             */


            #ifndef __MA5D4EVK_CONFIG_H__

            
            #define __MA5D4EVK_CONFIG_H__


            #define CONFIG_TIMESTAMP		/* Print image info with timestamp */


            #include "at91-sama5_common.h"

            
            #undef CONFIG_BOOTARGS

            
            #define CONFIG_SYS_USE_SERIALFLASH	1

            
            #define CONFIG_BOARD_LATE_INIT


            /*

            
             * Memory configurations

            
             */

            
            #define CONFIG_NR_DRAM_BANKS		1

            
            #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS

            
            #define CONFIG_SYS_SDRAM_SIZE		0x10000000


            #ifdef CONFIG_SPL_BUILD

            
            #define CONFIG_SYS_INIT_SP_ADDR		0x210000

            
            #else

            
            #define CONFIG_SYS_INIT_SP_ADDR \

            
            	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)

            
            #endif


            /*

            
             * Environment

            
             */

            
            #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE

            
            #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE

            
            #define CONFIG_ENV_SIZE			0x4000

            
            #define CONFIG_SYS_MMC_ENV_DEV		0	/* eMMC */

            
            #define CONFIG_ENV_OFFSET		512	/* just after the MBR */


            /*

            
             * U-Boot general configurations

            
             */


            /*

            
             * Serial Driver

            
             */

            
            #define CONFIG_ATMEL_USART

            
            #define CONFIG_USART_BASE		ATMEL_BASE_USART0

            
            #define CONFIG_USART_ID			ATMEL_ID_USART0


            /*

            
             * Ethernet

            
             */

            
            #ifdef CONFIG_CMD_NET

            
            #define CONFIG_MACB

            
            #define CONFIG_RMII

            
            #define CONFIG_NET_RETRY_COUNT		20

            
            #define CONFIG_MACB_SEARCH_PHY

            
            #define CONFIG_ARP_TIMEOUT		200UL

            
            #define CONFIG_IP_DEFRAG

            
            #endif


            /*

            
             * LCD

            
             */

            
            #ifdef CONFIG_LCD

            
            #define CONFIG_BMP_16BPP

            
            #define CONFIG_BMP_24BPP

            
            #define CONFIG_BMP_32BPP

            
            #define LCD_BPP				LCD_COLOR16

            
            #define LCD_OUTPUT_BPP                  24

            
            #define CONFIG_ATMEL_HLCD

            
            #endif


            /*

            
             * SD/MMC

            
             */

            
            #ifdef CONFIG_CMD_MMC

            
            #define CONFIG_GENERIC_ATMEL_MCI

            
            #endif


            /*

            
             * SPI NOR (boot memory)

            
             */

            
            #ifdef CONFIG_CMD_SF

            
            #define CONFIG_ATMEL_SPI

            
            #define CONFIG_ATMEL_SPI0

            
            #define CONFIG_SPI_FLASH_ATMEL

            
            #define CONFIG_SF_DEFAULT_BUS		0

            
            #define CONFIG_SF_DEFAULT_CS		0

            
            #define CONFIG_SF_DEFAULT_SPEED		30000000

            
            #endif


            /*

            
             * USB

            
             */

            
            #ifdef CONFIG_CMD_USB


            /* USB device */

            
            #define CONFIG_USB_ETHER

            
            #define CONFIG_USB_ETH_RNDIS

            
            #define CONFIG_USBNET_MANUFACTURER      "AriesEmbedded"

            
            #define CONFIG_USB_FUNCTION_MASS_STORAGE

            
            #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 * 1024 * 1024)

            
            #define DFU_DEFAULT_POLL_TIMEOUT	300

            
            #endif


            /*

            
             * Boot Linux

            
             */

            
            #define CONFIG_CMDLINE_TAG

            
            #define CONFIG_INITRD_TAG

            
            #define CONFIG_SETUP_MEMORY_TAGS

            
            #define CONFIG_BOOTFILE		"fitImage"

            
            #define CONFIG_BOOTARGS		"console=ttyS3,115200"

            
            #define CONFIG_LOADADDR		0x20800000

            
            #define CONFIG_BOOTCOMMAND	"run mmc_mmc"

            
            #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR


            /*

            
             * Extra Environments

            
             */

            
            #define CONFIG_PREBOOT		"run try_bootscript"

            
            #define CONFIG_HOSTNAME		ma5d4evk


            #define CONFIG_EXTRA_ENV_SETTINGS					\

            
            	"consdev=ttyS3\0"						\

            
            	"baudrate=115200\0"						\

            
            	"bootscript=boot.scr\0"						\

            
            	"bootdev=/dev/mmcblk0p1\0"					\

            
            	"bootpart=0:1\0"						\

            
            	"rootdev=/dev/mmcblk0p2\0"					\

            
            	"netdev=eth0\0"							\

            
            	"dfu_alt_info=mmc raw 0 3867148288\0"				\

            
            	"kernel_addr_r=0x22000000\0"					\

            
            	"update_spi_firmware_spl_addr=0x21000000\0"			\

            
            	"update_spi_firmware_spl_filename=boot.bin\0"			\

            
            	"update_spi_firmware_addr=0x22000000\0"				\

            
            	"update_spi_firmware_filename=u-boot.img\0"			\

            
            	"update_spi_firmware="	/* Update the SPI flash firmware */	\

            
            		"if sf probe ; then "					\

            
            		"if tftp ${update_spi_firmware_spl_addr} "		\

            
            			"${update_spi_firmware_spl_filename} ; then "	\

            
            		"setenv update_spi_firmware_spl_filesize ${filesize} ; "\

            
            		"if tftp ${update_spi_firmware_addr} "			\

            
            			"${update_spi_firmware_filename} ; then "	\

            
            		"setenv update_spi_firmware_filesize ${filesize} ; "	\

            
            		"sf update ${update_spi_firmware_spl_addr} 0x0 "	\

            
            			"${update_spi_firmware_spl_filesize} ; "	\

            
            		"sf update ${update_spi_firmware_addr} 0x10000 "	\

            
            			"${update_spi_firmware_filesize} ; "		\

            
            		"fi ; "							\

            
            		"fi ; "							\

            
            		"fi\0"							\

            
            	"addcons="							\

            
            		"setenv bootargs ${bootargs} "				\

            
            		"console=${consdev},${baudrate}\0"			\

            
            	"addip="							\

            
            		"setenv bootargs ${bootargs} "				\

            
            		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\

            
            			"${netmask}:${hostname}:${netdev}:off\0"	\

            
            	"addmisc="							\

            
            		"setenv bootargs ${bootargs} ${miscargs}\0"		\

            
            	"addargs=run addcons addmisc\0"					\

            
            	"mmcload="							\

            
            		"mmc rescan ; "						\

            
            		"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"	\

            
            	"netload="							\

            
            		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\

            
            	"miscargs=nohlt panic=1\0"					\

            
            	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\

            
            	"nfsargs="							\

            
            		"setenv bootargs root=/dev/nfs rw "			\

            
            			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\

            
            	"fdtimg=if test ${bootmode} = \"sf\" ; then "			\

            
            			"setenv kernel_fdt 1 ; "			\

            
            		"else ; "						\

            
            			"setenv kernel_fdt 2 ; "			\

            
            		"fi\0"							\

            
            	"mmc_mmc="							\

            
            		"run fdtimg mmcload mmcargs addargs ; "			\

            
            		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \

            
            	"mmc_nfs="							\

            
            		"run fdtimg mmcload nfsargs addip addargs ; "			\

            
            		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \

            
            	"net_mmc="							\

            
            		"run fdtimg netload mmcargs addargs ; "			\

            
            		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \

            
            	"net_nfs="							\

            
            		"run fdtimg netload nfsargs addip addargs ; "			\

            
            		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \

            
            	"try_bootscript="						\

            
            		"mmc rescan;"						\

            
            		"if test -e mmc 1:1 ${bootscript} ; then "		\

            
            		"if load mmc 1:1 ${kernel_addr_r} ${bootscript};"	\

            
            		"then ; "						\

            
            			"echo Running bootscript... ; "			\

            
            			"source ${kernel_addr_r} ; "			\

            
            		"fi ; "							\

            
            		"fi\0"

            
            /* SPL */

            
            #define CONFIG_SPL_FRAMEWORK

            
            #define CONFIG_SPL_TEXT_BASE		0x200000

            
            #define CONFIG_SPL_MAX_SIZE		0x10000

            
            #define CONFIG_SPL_BSS_START_ADDR	0x20000000

            
            #define CONFIG_SPL_BSS_MAX_SIZE		0x80000

            
            #define CONFIG_SYS_SPL_MALLOC_START	0x20080000

            
            #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000


            #define CONFIG_SYS_MONITOR_LEN		(512 << 10)


            #define CONFIG_SPL_SPI_LOAD

            
            #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000


            #define CONFIG_SYS_USE_MMC

            
            #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds

            
            #define CONFIG_SPL_MMC_SUPPORT

            
            #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200

            
            #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1

            
            #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

            
            #define CONFIG_SPL_FAT_SUPPORT

            
            #define CONFIG_SPL_LIBDISK_SUPPORT


            #endif	/* __MA5D4EVK_CONFIG_H__ */
	/*
	* Aries MA5D4 configuration
	* Copyright (C) 2015 Marek Vasut <marex@denx.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __MA5D4EVK_CONFIG_H__
	#define __MA5D4EVK_CONFIG_H__

	#define CONFIG_TIMESTAMP /* Print image info with timestamp */

	#include "at91-sama5_common.h"
	#undef CONFIG_BOOTARGS
	#define CONFIG_SYS_USE_SERIALFLASH 1
	#define CONFIG_BOARD_LATE_INIT

	/*
	* Memory configurations
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
	#define CONFIG_SYS_SDRAM_SIZE 0x10000000

	#ifdef CONFIG_SPL_BUILD
	#define CONFIG_SYS_INIT_SP_ADDR 0x210000
	#else
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
	#endif

	/*
	* Environment
	*/
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
	#define CONFIG_ENV_SIZE 0x4000
	#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
	#define CONFIG_ENV_OFFSET 512 /* just after the MBR */

	/*
	* U-Boot general configurations
	*/

	/*
	* Serial Driver
	*/
	#define CONFIG_ATMEL_USART
	#define CONFIG_USART_BASE ATMEL_BASE_USART0
	#define CONFIG_USART_ID ATMEL_ID_USART0

	/*
	* Ethernet
	*/
	#ifdef CONFIG_CMD_NET
	#define CONFIG_MACB
	#define CONFIG_RMII
	#define CONFIG_NET_RETRY_COUNT 20
	#define CONFIG_MACB_SEARCH_PHY
	#define CONFIG_ARP_TIMEOUT 200UL
	#define CONFIG_IP_DEFRAG
	#endif

	/*
	* LCD
	*/
	#ifdef CONFIG_LCD
	#define CONFIG_BMP_16BPP
	#define CONFIG_BMP_24BPP
	#define CONFIG_BMP_32BPP
	#define LCD_BPP LCD_COLOR16
	#define LCD_OUTPUT_BPP 24
	#define CONFIG_ATMEL_HLCD
	#endif

	/*
	* SD/MMC
	*/
	#ifdef CONFIG_CMD_MMC
	#define CONFIG_GENERIC_ATMEL_MCI
	#endif

	/*
	* SPI NOR (boot memory)
	*/
	#ifdef CONFIG_CMD_SF
	#define CONFIG_ATMEL_SPI
	#define CONFIG_ATMEL_SPI0
	#define CONFIG_SPI_FLASH_ATMEL
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 30000000
	#endif

	/*
	* USB
	*/
	#ifdef CONFIG_CMD_USB

	/* USB device */
	#define CONFIG_USB_ETHER
	#define CONFIG_USB_ETH_RNDIS
	#define CONFIG_USBNET_MANUFACTURER "AriesEmbedded"
	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
	#define DFU_DEFAULT_POLL_TIMEOUT 300
	#endif

	/*
	* Boot Linux
	*/
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_INITRD_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_BOOTFILE "fitImage"
	#define CONFIG_BOOTARGS "console=ttyS3,115200"
	#define CONFIG_LOADADDR 0x20800000
	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	/*
	* Extra Environments
	*/
	#define CONFIG_PREBOOT "run try_bootscript"
	#define CONFIG_HOSTNAME ma5d4evk

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"consdev=ttyS3\0" \
	"baudrate=115200\0" \
	"bootscript=boot.scr\0" \
	"bootdev=/dev/mmcblk0p1\0" \
	"bootpart=0:1\0" \
	"rootdev=/dev/mmcblk0p2\0" \
	"netdev=eth0\0" \
	"dfu_alt_info=mmc raw 0 3867148288\0" \
	"kernel_addr_r=0x22000000\0" \
	"update_spi_firmware_spl_addr=0x21000000\0" \
	"update_spi_firmware_spl_filename=boot.bin\0" \
	"update_spi_firmware_addr=0x22000000\0" \
	"update_spi_firmware_filename=u-boot.img\0" \
	"update_spi_firmware=" /* Update the SPI flash firmware */ \
	"if sf probe ; then " \
	"if tftp ${update_spi_firmware_spl_addr} " \
	"${update_spi_firmware_spl_filename} ; then " \
	"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
	"if tftp ${update_spi_firmware_addr} " \
	"${update_spi_firmware_filename} ; then " \
	"setenv update_spi_firmware_filesize ${filesize} ; " \
	"sf update ${update_spi_firmware_spl_addr} 0x0 " \
	"${update_spi_firmware_spl_filesize} ; " \
	"sf update ${update_spi_firmware_addr} 0x10000 " \
	"${update_spi_firmware_filesize} ; " \
	"fi ; " \
	"fi ; " \
	"fi\0" \
	"addcons=" \
	"setenv bootargs ${bootargs} " \
	"console=${consdev},${baudrate}\0" \
	"addip=" \
	"setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	"${netmask}:${hostname}:${netdev}:off\0" \
	"addmisc=" \
	"setenv bootargs ${bootargs} ${miscargs}\0" \
	"addargs=run addcons addmisc\0" \
	"mmcload=" \
	"mmc rescan ; " \
	"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
	"netload=" \
	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	"miscargs=nohlt panic=1\0" \
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	"nfsargs=" \
	"setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	"fdtimg=if test ${bootmode} = \"sf\" ; then " \
	"setenv kernel_fdt 1 ; " \
	"else ; " \
	"setenv kernel_fdt 2 ; " \
	"fi\0" \
	"mmc_mmc=" \
	"run fdtimg mmcload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"mmc_nfs=" \
	"run fdtimg mmcload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"net_mmc=" \
	"run fdtimg netload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"net_nfs=" \
	"run fdtimg netload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"try_bootscript=" \
	"mmc rescan;" \
	"if test -e mmc 1:1 ${bootscript} ; then " \
	"if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
	"then ; " \
	"echo Running bootscript... ; " \
	"source ${kernel_addr_r} ; " \
	"fi ; " \
	"fi\0"
	/* SPL */
	#define CONFIG_SPL_FRAMEWORK
	#define CONFIG_SPL_TEXT_BASE 0x200000
	#define CONFIG_SPL_MAX_SIZE 0x10000
	#define CONFIG_SPL_BSS_START_ADDR 0x20000000
	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000

	#define CONFIG_SYS_MONITOR_LEN (512 << 10)

	#define CONFIG_SPL_SPI_LOAD
	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000

	#define CONFIG_SYS_USE_MMC
	#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
	#define CONFIG_SPL_MMC_SUPPORT
	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	#define CONFIG_SPL_FAT_SUPPORT
	#define CONFIG_SPL_LIBDISK_SUPPORT

	#endif /* __MA5D4EVK_CONFIG_H__ */