| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Some very basic tests for fdtdec, accessed through test_fdtdec command. | |
| * They are easiest to use with sandbox. | |
| * | |
| * Copyright (c) 2011 The Chromium OS Authors. | |
| */ | |
| #include <command.h> | |
| #include <fdtdec.h> | |
| #include <linux/libfdt.h> | |
| #include <malloc.h> | |
| #include <os.h> | |
| /* The size of our test fdt blob */ | |
| #define FDT_SIZE (16 * 1024) | |
| #define CHECK(op) ({ \ | |
| int err = op; \ | |
| if (err < 0) { \ | |
| printf("%s: %s: %s\n", __func__, #op, \ | |
| fdt_strerror(err)); \ | |
| return err; \ | |
| } \ | |
| \ | |
| err; \ | |
| }) | |
| #define CHECKVAL(op, expected) ({ \ | |
| int err = op; \ | |
| if (err != expected) { \ | |
| printf("%s: %s: expected %d, but returned %d\n",\ | |
| __func__, #op, expected, err); \ | |
| return err; \ | |
| } \ | |
| \ | |
| err; \ | |
| }) | |
| #define CHECKOK(op) CHECKVAL(op, 0) | |
| /* maximum number of nodes / aliases to generate */ | |
| #define MAX_NODES 20 | |
| /* | |
| * Make a test fdt | |
| * | |
| * @param fdt Device tree pointer | |
| * @param size Size of device tree blob | |
| * @param aliases Specifies alias assignments. Format is a list of items | |
| * separated by space. Items are #a where | |
| * # is the alias number | |
| * a is the node to point to | |
| * @param nodes Specifies nodes to generate (a=0, b=1), upper case | |
| * means to create a disabled node | |
| */ | |
| static int make_fdt(void *fdt, int size, const char *aliases, | |
| const char *nodes) | |
| { | |
| char name[20], value[20]; | |
| const char *s; | |
| #if defined(DEBUG) && defined(CONFIG_SANDBOX) | |
| int fd; | |
| #endif | |
| CHECK(fdt_create(fdt, size)); | |
| CHECK(fdt_finish_reservemap(fdt)); | |
| CHECK(fdt_begin_node(fdt, "")); | |
| CHECK(fdt_begin_node(fdt, "aliases")); | |
| for (s = aliases; *s;) { | |
| sprintf(name, "i2c%c", *s); | |
| sprintf(value, "/i2c%d@0", s[1] - 'a'); | |
| CHECK(fdt_property_string(fdt, name, value)); | |
| s += 2 + (s[2] != '\0'); | |
| } | |
| CHECK(fdt_end_node(fdt)); | |
| for (s = nodes; *s; s++) { | |
| sprintf(value, "i2c%d@0", (*s & 0xdf) - 'A'); | |
| CHECK(fdt_begin_node(fdt, value)); | |
| CHECK(fdt_property_string(fdt, "compatible", | |
| fdtdec_get_compatible(COMPAT_UNKNOWN))); | |
| if (*s <= 'Z') | |
| CHECK(fdt_property_string(fdt, "status", "disabled")); | |
| CHECK(fdt_end_node(fdt)); | |
| } | |
| CHECK(fdt_end_node(fdt)); | |
| CHECK(fdt_finish(fdt)); | |
| CHECK(fdt_pack(fdt)); | |
| #if defined(DEBUG) && defined(CONFIG_SANDBOX) | |
| fd = os_open("/tmp/fdtdec-text.dtb", OS_O_CREAT | OS_O_WRONLY); | |
| if (fd == -1) { | |
| printf("Could not open .dtb file to write\n"); | |
| return -1; | |
| } | |
| os_write(fd, fdt, size); | |
| os_close(fd); | |
| #endif | |
| return 0; | |
| } | |
| static int run_test(const char *aliases, const char *nodes, const char *expect) | |
| { | |
| int list[MAX_NODES]; | |
| const char *s; | |
| void *blob; | |
| int i; | |
| blob = malloc(FDT_SIZE); | |
| if (!blob) { | |
| printf("%s: out of memory\n", __func__); | |
| return 1; | |
| } | |
| printf("aliases=%s, nodes=%s, expect=%s: ", aliases, nodes, expect); | |
| CHECKVAL(make_fdt(blob, FDT_SIZE, aliases, nodes), 0); | |
| CHECKVAL(fdtdec_find_aliases_for_id(blob, "i2c", | |
| COMPAT_UNKNOWN, | |
| list, ARRAY_SIZE(list)), (int)strlen(expect)); | |
| /* Check we got the right ones */ | |
| for (i = 0, s = expect; *s; s++, i++) { | |
| int want = *s; | |
| const char *name; | |
| int got = ' '; | |
| name = list[i] ? fdt_get_name(blob, list[i], NULL) : NULL; | |
| if (name) | |
| got = name[3] + 'a' - '0'; | |
| if (got != want) { | |
| printf("Position %d: Expected '%c', got '%c' ('%s')\n", | |
| i, want, got, name); | |
| return 1; | |
| } | |
| } | |
| printf("pass\n"); | |
| free(blob); | |
| return 0; | |
| } | |
| static int make_fdt_carveout_device(void *fdt, uint32_t na, uint32_t ns) | |
| { | |
| const char *basename = "/display"; | |
| struct fdt_memory carveout = { | |
| #ifdef CONFIG_PHYS_64BIT | |
| .start = 0x180000000, | |
| .end = 0x18fffffff, | |
| #else | |
| .start = 0x80000000, | |
| .end = 0x8fffffff, | |
| #endif | |
| }; | |
| fdt32_t cells[4], *ptr = cells; | |
| uint32_t upper, lower; | |
| fdt_size_t size; | |
| char name[32]; | |
| int offset; | |
| /* store one or two address cells */ | |
| upper = upper_32_bits(carveout.start); | |
| lower = lower_32_bits(carveout.start); | |
| if (na > 1 && upper > 0) | |
| snprintf(name, sizeof(name), "%s@%x,%x", basename, upper, | |
| lower); | |
| else | |
| snprintf(name, sizeof(name), "%s@%x", basename, lower); | |
| if (na > 1) | |
| *ptr++ = cpu_to_fdt32(upper); | |
| *ptr++ = cpu_to_fdt32(lower); | |
| /* store one or two size cells */ | |
| size = carveout.end - carveout.start + 1; | |
| upper = upper_32_bits(size); | |
| lower = lower_32_bits(size); | |
| if (ns > 1) | |
| *ptr++ = cpu_to_fdt32(upper); | |
| *ptr++ = cpu_to_fdt32(lower); | |
| offset = CHECK(fdt_add_subnode(fdt, 0, name + 1)); | |
| CHECK(fdt_setprop(fdt, offset, "reg", cells, (na + ns) * sizeof(*cells))); | |
| return fdtdec_set_carveout(fdt, name, "memory-region", 0, &carveout, | |
| "framebuffer", NULL, 0, 0); | |
| } | |
| static int check_fdt_carveout(void *fdt, uint32_t address_cells, | |
| uint32_t size_cells) | |
| { | |
| #ifdef CONFIG_PHYS_64BIT | |
| const char *name = "/display@1,80000000"; | |
| const struct fdt_memory expected = { | |
| .start = 0x180000000, | |
| .end = 0x18fffffff, | |
| }; | |
| #else | |
| const char *name = "/display@80000000"; | |
| const struct fdt_memory expected = { | |
| .start = 0x80000000, | |
| .end = 0x8fffffff, | |
| }; | |
| #endif | |
| struct fdt_memory carveout; | |
| printf("carveout: %pap-%pap na=%u ns=%u: ", &expected.start, | |
| &expected.end, address_cells, size_cells); | |
| CHECK(fdtdec_get_carveout(fdt, name, "memory-region", 0, &carveout, | |
| NULL, NULL, NULL, NULL)); | |
| if ((carveout.start != expected.start) || | |
| (carveout.end != expected.end)) { | |
| printf("carveout: %pap-%pap, expected %pap-%pap\n", | |
| &carveout.start, &carveout.end, | |
| &expected.start, &expected.end); | |
| return 1; | |
| } | |
| printf("pass\n"); | |
| return 0; | |
| } | |
| static int make_fdt_carveout(void *fdt, int size, uint32_t address_cells, | |
| uint32_t size_cells) | |
| { | |
| fdt32_t na = cpu_to_fdt32(address_cells); | |
| fdt32_t ns = cpu_to_fdt32(size_cells); | |
| #if defined(DEBUG) && defined(CONFIG_SANDBOX) | |
| char filename[512]; | |
| int fd; | |
| #endif | |
| int err; | |
| CHECK(fdt_create(fdt, size)); | |
| CHECK(fdt_finish_reservemap(fdt)); | |
| CHECK(fdt_begin_node(fdt, "")); | |
| CHECK(fdt_property(fdt, "#address-cells", &na, sizeof(na))); | |
| CHECK(fdt_property(fdt, "#size-cells", &ns, sizeof(ns))); | |
| CHECK(fdt_end_node(fdt)); | |
| CHECK(fdt_finish(fdt)); | |
| CHECK(fdt_pack(fdt)); | |
| CHECK(fdt_open_into(fdt, fdt, FDT_SIZE)); | |
| err = make_fdt_carveout_device(fdt, address_cells, size_cells); | |
| #if defined(DEBUG) && defined(CONFIG_SANDBOX) | |
| snprintf(filename, sizeof(filename), "/tmp/fdtdec-carveout-%u-%u.dtb", | |
| address_cells, size_cells); | |
| fd = os_open(filename, OS_O_CREAT | OS_O_WRONLY); | |
| if (fd < 0) { | |
| printf("could not open .dtb file to write\n"); | |
| goto out; | |
| } | |
| os_write(fd, fdt, size); | |
| os_close(fd); | |
| out: | |
| #endif | |
| return err; | |
| } | |
| static int check_carveout(void) | |
| { | |
| void *fdt; | |
| fdt = malloc(FDT_SIZE); | |
| if (!fdt) { | |
| printf("%s: out of memory\n", __func__); | |
| return 1; | |
| } | |
| #ifndef CONFIG_PHYS_64BIT | |
| CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 1), 0); | |
| CHECKOK(check_fdt_carveout(fdt, 1, 1)); | |
| CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 2), 0); | |
| CHECKOK(check_fdt_carveout(fdt, 1, 2)); | |
| #else | |
| CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 1), -FDT_ERR_BADVALUE); | |
| CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 2), -FDT_ERR_BADVALUE); | |
| #endif | |
| CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 2, 1), 0); | |
| CHECKOK(check_fdt_carveout(fdt, 2, 1)); | |
| CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 2, 2), 0); | |
| CHECKOK(check_fdt_carveout(fdt, 2, 2)); | |
| free(fdt); | |
| return 0; | |
| } | |
| static int do_test_fdtdec(struct cmd_tbl *cmdtp, int flag, int argc, | |
| char *const argv[]) | |
| { | |
| /* basic tests */ | |
| CHECKOK(run_test("", "", "")); | |
| CHECKOK(run_test("1e 3d", "", "")); | |
| /* | |
| * 'a' represents 0, 'b' represents 1, etc. | |
| * The first character is the alias number, the second is the node | |
| * number. So the params mean: | |
| * 0a 1b : point alias 0 to node 0 (a), alias 1 to node 1(b) | |
| * ab : to create nodes 0 and 1 (a and b) | |
| * ab : we expect the function to return two nodes, in | |
| * the order 0, 1 | |
| */ | |
| CHECKOK(run_test("0a 1b", "ab", "ab")); | |
| CHECKOK(run_test("0a 1c", "ab", "ab")); | |
| CHECKOK(run_test("1c", "ab", "ab")); | |
| CHECKOK(run_test("1b", "ab", "ab")); | |
| CHECKOK(run_test("0b", "ab", "ba")); | |
| CHECKOK(run_test("0b 2d", "dbc", "bcd")); | |
| CHECKOK(run_test("0d 3a 1c 2b", "dbac", "dcba")); | |
| /* things with holes */ | |
| CHECKOK(run_test("1b 3d", "dbc", "cb d")); | |
| CHECKOK(run_test("1e 3d", "dbc", "bc d")); | |
| /* no aliases */ | |
| CHECKOK(run_test("", "dbac", "dbac")); | |
| /* disabled nodes */ | |
| CHECKOK(run_test("0d 3a 1c 2b", "dBac", "dc a")); | |
| CHECKOK(run_test("0b 2d", "DBc", "c")); | |
| CHECKOK(run_test("0b 4d 2c", "DBc", " c")); | |
| /* conflicting aliases - first one gets it */ | |
| CHECKOK(run_test("2a 1a 0a", "a", " a")); | |
| CHECKOK(run_test("0a 1a 2a", "a", "a")); | |
| CHECKOK(check_carveout()); | |
| printf("Test passed\n"); | |
| return 0; | |
| } | |
| U_BOOT_CMD( | |
| test_fdtdec, 3, 1, do_test_fdtdec, | |
| "test_fdtdec", | |
| "Run tests for fdtdec library"); |