| /* | |
| * (C) Copyright 2002,2003, Motorola Inc. | |
| * Xianghua Xiao, (X.Xiao@motorola.com) | |
| * | |
| * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <netdev.h> | |
| #include <asm/processor.h> | |
| #include <asm/mmu.h> | |
| #include <asm/immap_85xx.h> | |
| #include <asm/fsl_ddr_sdram.h> | |
| #include <spd_sdram.h> | |
| long int fixed_sdram (void); | |
| int board_pre_init (void) | |
| { | |
| #if defined(CONFIG_PCI) | |
| volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR); | |
| pci->peer &= 0xffffffdf; /* disable master abort */ | |
| #endif | |
| return 0; | |
| } | |
| int checkboard (void) | |
| { | |
| sys_info_t sysinfo; | |
| get_sys_info (&sysinfo); | |
| printf ("Board: Freescale MPC8540EVAL Board\n"); | |
| printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); | |
| printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); | |
| printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); | |
| if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \ | |
| || (CFG_LBC_LCRR & 0x0f) == 8) { | |
| printf ("\tLBC: %lu MHz\n", | |
| sysinfo.freqSystemBus / 1000000/(CFG_LBC_LCRR & 0x0f)); | |
| } else { | |
| printf("\tLBC: unknown\n"); | |
| } | |
| printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); | |
| return (0); | |
| } | |
| phys_size_t initdram (int board_type) | |
| { | |
| long dram_size = 0; | |
| #if !defined(CONFIG_RAM_AS_FLASH) | |
| volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); | |
| sys_info_t sysinfo; | |
| uint temp_lbcdll = 0; | |
| #endif | |
| #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) | |
| volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); | |
| #endif | |
| #if defined(CONFIG_DDR_DLL) | |
| uint temp_ddrdll = 0; | |
| /* Work around to stabilize DDR DLL */ | |
| temp_ddrdll = gur->ddrdllcr; | |
| gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; | |
| asm("sync;isync;msync"); | |
| #endif | |
| #if defined(CONFIG_SPD_EEPROM) | |
| dram_size = fsl_ddr_sdram(); | |
| dram_size = setup_ddr_tlbs(dram_size / 0x100000); | |
| dram_size *= 0x100000; | |
| #else | |
| dram_size = fixed_sdram (); | |
| #endif | |
| #if defined(CFG_RAMBOOT) | |
| return dram_size; | |
| #endif | |
| #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ | |
| get_sys_info(&sysinfo); | |
| /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */ | |
| if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) { | |
| lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000; | |
| } else { | |
| lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff; | |
| udelay(200); | |
| temp_lbcdll = gur->lbcdllcr; | |
| gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; | |
| asm("sync;isync;msync"); | |
| } | |
| lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */ | |
| lbc->br2 = CFG_BR2_PRELIM; | |
| lbc->lbcr = CFG_LBC_LBCR; | |
| lbc->lsdmr = CFG_LBC_LSDMR_1; | |
| asm("sync"); | |
| * (ulong *)0 = 0x000000ff; | |
| lbc->lsdmr = CFG_LBC_LSDMR_2; | |
| asm("sync"); | |
| * (ulong *)0 = 0x000000ff; | |
| lbc->lsdmr = CFG_LBC_LSDMR_3; | |
| asm("sync"); | |
| * (ulong *)0 = 0x000000ff; | |
| lbc->lsdmr = CFG_LBC_LSDMR_4; | |
| asm("sync"); | |
| * (ulong *)0 = 0x000000ff; | |
| lbc->lsdmr = CFG_LBC_LSDMR_5; | |
| asm("sync"); | |
| lbc->lsrt = CFG_LBC_LSRT; | |
| asm("sync"); | |
| lbc->mrtpr = CFG_LBC_MRTPR; | |
| asm("sync"); | |
| #endif | |
| #if defined(CONFIG_DDR_ECC) | |
| { | |
| /* Initialize all of memory for ECC, then | |
| * enable errors */ | |
| uint *p = 0; | |
| uint i = 0; | |
| volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); | |
| dma_init(); | |
| for (*p = 0; p < (uint *)(8 * 1024); p++) { | |
| if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } | |
| *p = (unsigned int)0xdeadbeef; | |
| if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } | |
| } | |
| /* 8K */ | |
| dma_xfer((uint *)0x2000,0x2000,(uint *)0); | |
| /* 16K */ | |
| dma_xfer((uint *)0x4000,0x4000,(uint *)0); | |
| /* 32K */ | |
| dma_xfer((uint *)0x8000,0x8000,(uint *)0); | |
| /* 64K */ | |
| dma_xfer((uint *)0x10000,0x10000,(uint *)0); | |
| /* 128k */ | |
| dma_xfer((uint *)0x20000,0x20000,(uint *)0); | |
| /* 256k */ | |
| dma_xfer((uint *)0x40000,0x40000,(uint *)0); | |
| /* 512k */ | |
| dma_xfer((uint *)0x80000,0x80000,(uint *)0); | |
| /* 1M */ | |
| dma_xfer((uint *)0x100000,0x100000,(uint *)0); | |
| /* 2M */ | |
| dma_xfer((uint *)0x200000,0x200000,(uint *)0); | |
| /* 4M */ | |
| dma_xfer((uint *)0x400000,0x400000,(uint *)0); | |
| for (i = 1; i < dram_size / 0x800000; i++) { | |
| dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); | |
| } | |
| /* Enable errors for ECC */ | |
| ddr->err_disable = 0x00000000; | |
| asm("sync;isync;msync"); | |
| } | |
| #endif | |
| return dram_size; | |
| } | |
| #if defined(CFG_DRAM_TEST) | |
| int testdram (void) | |
| { | |
| uint *pstart = (uint *) CFG_MEMTEST_START; | |
| uint *pend = (uint *) CFG_MEMTEST_END; | |
| uint *p; | |
| printf("SDRAM test phase 1:\n"); | |
| for (p = pstart; p < pend; p++) | |
| *p = 0xaaaaaaaa; | |
| for (p = pstart; p < pend; p++) { | |
| if (*p != 0xaaaaaaaa) { | |
| printf ("SDRAM test fails at: %08x\n", (uint) p); | |
| return 1; | |
| } | |
| } | |
| printf("SDRAM test phase 2:\n"); | |
| for (p = pstart; p < pend; p++) | |
| *p = 0x55555555; | |
| for (p = pstart; p < pend; p++) { | |
| if (*p != 0x55555555) { | |
| printf ("SDRAM test fails at: %08x\n", (uint) p); | |
| return 1; | |
| } | |
| } | |
| printf("SDRAM test passed.\n"); | |
| return 0; | |
| } | |
| #endif | |
| #if !defined(CONFIG_SPD_EEPROM) | |
| /************************************************************************* | |
| * fixed sdram init -- doesn't use serial presence detect. | |
| ************************************************************************/ | |
| long int fixed_sdram (void) | |
| { | |
| #ifndef CFG_RAMBOOT | |
| volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); | |
| ddr->cs0_bnds = CFG_DDR_CS0_BNDS; | |
| ddr->cs0_config = CFG_DDR_CS0_CONFIG; | |
| ddr->timing_cfg_1 = CFG_DDR_TIMING_1; | |
| ddr->timing_cfg_2 = CFG_DDR_TIMING_2; | |
| ddr->sdram_mode = CFG_DDR_MODE; | |
| ddr->sdram_interval = CFG_DDR_INTERVAL; | |
| #if defined (CONFIG_DDR_ECC) | |
| ddr->err_disable = 0x0000000D; | |
| ddr->err_sbe = 0x00ff0000; | |
| #endif | |
| asm("sync;isync;msync"); | |
| udelay(500); | |
| #if defined (CONFIG_DDR_ECC) | |
| /* Enable ECC checking */ | |
| ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); | |
| #else | |
| ddr->sdram_cfg = CFG_DDR_CONTROL; | |
| #endif | |
| asm("sync; isync; msync"); | |
| udelay(500); | |
| #endif | |
| return (CFG_SDRAM_SIZE * 1024 * 1024); | |
| } | |
| #endif /* !defined(CONFIG_SPD_EEPROM) */ | |
| int board_eth_init(bd_t *bis) | |
| { | |
| /* | |
| * This board either has PCI NICs or uses the CPU's TSECs | |
| * pci_eth_init() will return 0 if no NICs found, so in that case | |
| * returning -1 will force cpu_eth_init() to be called. | |
| */ | |
| int num = pci_eth_init(bis); | |
| return (num <= 0 ? -1 : num); | |
| } |