| /* | |
| * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. | |
| * (C) Copyright 2007 DENX Software Engineering | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /* | |
| * CPU specific code for the MPC512x family. | |
| * | |
| * Derived from the MPC83xx code. | |
| */ | |
| #include <common.h> | |
| #include <command.h> | |
| #include <mpc512x.h> | |
| #include <netdev.h> | |
| #include <asm/processor.h> | |
| #if defined(CONFIG_OF_LIBFDT) | |
| #include <fdt_support.h> | |
| #endif | |
| DECLARE_GLOBAL_DATA_PTR; | |
| int checkcpu (void) | |
| { | |
| volatile immap_t *immr = (immap_t *) CFG_IMMR; | |
| ulong clock = gd->cpu_clk; | |
| u32 pvr = get_pvr (); | |
| u32 spridr = immr->sysconf.spridr; | |
| char buf[32]; | |
| puts ("CPU: "); | |
| switch (spridr & 0xffff0000) { | |
| case SPR_5121E: | |
| puts ("MPC5121e "); | |
| break; | |
| default: | |
| printf ("Unknown part ID %08x ", spridr & 0xffff0000); | |
| } | |
| printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); | |
| switch (pvr & 0xffff0000) { | |
| case PVR_E300C4: | |
| puts ("e300c4 "); | |
| break; | |
| default: | |
| puts ("unknown "); | |
| } | |
| printf ("at %s MHz, CSB at %3d MHz\n", strmhz(buf, clock), | |
| gd->csb_clk / 1000000); | |
| return 0; | |
| } | |
| int | |
| do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) | |
| { | |
| ulong msr; | |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; | |
| /* Interrupts and MMU off */ | |
| __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); | |
| msr &= ~( MSR_EE | MSR_IR | MSR_DR); | |
| __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); | |
| /* | |
| * Enable Reset Control Reg - "RSTE" is the magic word that let us go | |
| */ | |
| immap->reset.rpr = 0x52535445; | |
| /* Verify Reset Control Reg is enabled */ | |
| while (!((immap->reset.rcer) & RCER_CRE)) | |
| ; | |
| printf ("Resetting the board.\n"); | |
| udelay(200); | |
| /* Perform reset */ | |
| immap->reset.rcr = RCR_SWHR; | |
| /* Unreached... */ | |
| return 1; | |
| } | |
| /* | |
| * Get timebase clock frequency (like cpu_clk in Hz) | |
| */ | |
| unsigned long get_tbclk (void) | |
| { | |
| ulong tbclk; | |
| tbclk = (gd->bus_clk + 3L) / 4L; | |
| return tbclk; | |
| } | |
| #if defined(CONFIG_WATCHDOG) | |
| void watchdog_reset (void) | |
| { | |
| int re_enable = disable_interrupts (); | |
| /* Reset watchdog */ | |
| volatile immap_t *immr = (immap_t *) CFG_IMMR; | |
| immr->wdt.swsrr = 0x556c; | |
| immr->wdt.swsrr = 0xaa39; | |
| if (re_enable) | |
| enable_interrupts (); | |
| } | |
| #endif | |
| #ifdef CONFIG_OF_LIBFDT | |
| #ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES | |
| /* | |
| * fdt setup for old device trees | |
| * fix up | |
| * cpu clocks | |
| * soc clocks | |
| * ethernet addresses | |
| */ | |
| static void old_ft_cpu_setup(void *blob, bd_t *bd) | |
| { | |
| /* | |
| * avoid fixing up by path because that | |
| * produces scary error messages | |
| */ | |
| /* | |
| * old device trees have ethernet nodes with | |
| * device_type = "network" | |
| */ | |
| do_fixup_by_prop(blob, "device_type", "network", 8, | |
| "local-mac-address", bd->bi_enetaddr, 6, 0); | |
| do_fixup_by_prop(blob, "device_type", "network", 8, | |
| "address", bd->bi_enetaddr, 6, 0); | |
| /* | |
| * old device trees have soc nodes with | |
| * device_type = "soc" | |
| */ | |
| do_fixup_by_prop_u32(blob, "device_type", "soc", 4, | |
| "bus-frequency", bd->bi_ipsfreq, 0); | |
| } | |
| #endif | |
| static void ft_clock_setup(void *blob, bd_t *bd) | |
| { | |
| char *cpu_path = "/cpus/" OF_CPU; | |
| /* | |
| * fixup cpu clocks using path | |
| */ | |
| do_fixup_by_path_u32(blob, cpu_path, | |
| "timebase-frequency", OF_TBCLK, 1); | |
| do_fixup_by_path_u32(blob, cpu_path, | |
| "bus-frequency", bd->bi_busfreq, 1); | |
| do_fixup_by_path_u32(blob, cpu_path, | |
| "clock-frequency", bd->bi_intfreq, 1); | |
| /* | |
| * fixup soc clocks using compatible | |
| */ | |
| do_fixup_by_compat_u32(blob, OF_SOC_COMPAT, | |
| "bus-frequency", bd->bi_ipsfreq, 1); | |
| } | |
| void ft_cpu_setup(void *blob, bd_t *bd) | |
| { | |
| #ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES | |
| old_ft_cpu_setup(blob, bd); | |
| #endif | |
| ft_clock_setup(blob, bd); | |
| #ifdef CONFIG_HAS_ETH0 | |
| fdt_fixup_ethernet(blob); | |
| #endif | |
| } | |
| #endif | |
| #ifdef CONFIG_MPC512x_FEC | |
| /* Default initializations for FEC controllers. To override, | |
| * create a board-specific function called: | |
| * int board_eth_init(bd_t *bis) | |
| */ | |
| int cpu_eth_init(bd_t *bis) | |
| { | |
| return mpc512x_fec_initialize(bis); | |
| } | |
| #endif |