|
Freescale MCF52277EVB ColdFire Development Board |
|
================================================ |
|
|
|
TsiChung Liew(Tsi-Chung.Liew@freescale.com) |
|
Created Jan 8, 2008 |
|
=========================================== |
|
|
|
|
|
Changed files: |
|
============== |
|
|
|
- board/freescale/m52277evb/m52277evb.c Dram setup |
|
- board/freescale/m52277evb/Makefile Makefile |
|
- board/freescale/m52277evb/config.mk config make |
|
- board/freescale/m52277evb/u-boot.lds Linker description |
|
|
|
- cpu/mcf5227x/cpu.c cpu specific code |
|
- cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs |
|
- cpu/mcf5227x/interrupts.c cpu specific interrupt support |
|
- cpu/mcf5227x/speed.c system, flexbus, and cpu clock |
|
- cpu/mcf5227x/Makefile Makefile |
|
- cpu/mcf5227x/config.mk config make |
|
- cpu/mcf5227x/start.S start up assembly code |
|
|
|
- doc/README.m52277evb This readme file |
|
|
|
- drivers/serial/mcfuart.c ColdFire common UART driver |
|
- drivers/rtc/mcfrtc.c Realtime clock Driver |
|
|
|
- include/asm-m68k/bitops.h Bit operation function export |
|
- include/asm-m68k/byteorder.h Byte order functions |
|
- include/asm-m68k/crossbar.h CrossBar structure and definition |
|
- include/asm-m68k/dspi.h DSPI structure and definition |
|
- include/asm-m68k/edma.h eDMA structure and definition |
|
- include/asm-m68k/flexbus.h FlexBus structure and definition |
|
- include/asm-m68k/fsl_i2c.h I2C structure and definition |
|
- include/asm-m68k/global_data.h Global data structure |
|
- include/asm-m68k/immap.h ColdFire specific header file and driver macros |
|
- include/asm-m68k/immap_5227x.h mcf5227x specific header file |
|
- include/asm-m68k/io.h io functions |
|
- include/asm-m68k/lcd.h LCD structure and definition |
|
- include/asm-m68k/m5227x.h mcf5227x specific header file |
|
- include/asm-m68k/posix_types.h Posix |
|
- include/asm-m68k/processor.h header file |
|
- include/asm-m68k/ptrace.h Exception structure |
|
- include/asm-m68k/rtc.h Realtime clock header file |
|
- include/asm-m68k/ssi.h SSI structure and definition |
|
- include/asm-m68k/string.h String function export |
|
- include/asm-m68k/timer.h Timer structure and definition |
|
- include/asm-m68k/types.h Data types definition |
|
- include/asm-m68k/uart.h Uart structure and definition |
|
- include/asm-m68k/u-boot.h u-boot structure |
|
|
|
- include/configs/M52277EVB.h Board specific configuration file |
|
|
|
- lib_m68k/board.c board init function |
|
- lib_m68k/cache.c |
|
- lib_m68k/interrupts Coldfire common interrupt functions |
|
- lib_m68k/m68k_linux.c |
|
- lib_m68k/time.c Timer functions (Dma timer and PIT) |
|
- lib_m68k/traps.c Exception init code |
|
|
|
1 MCF52277 specific Options/Settings |
|
==================================== |
|
1.1 pre-loader is no longer suppoer in this coldfire family |
|
|
|
1.2 Configuration settings for M52277EVB Development Board |
|
CONFIG_MCF5227x -- define for all MCF5227x CPUs |
|
CONFIG_M52277 -- define for all Freescale MCF52277 CPUs |
|
CONFIG_M52277EVB -- define for M52277EVB board |
|
|
|
CONFIG_MCFUART -- define to use common CF Uart driver |
|
CFG_UART_PORT -- define UART port number, start with 0, 1 and 2 |
|
CONFIG_BAUDRATE -- define UART baudrate |
|
|
|
CONFIG_MCFRTC -- define to use common CF RTC driver |
|
CFG_MCFRTC_BASE -- provide base address for RTC in immap.h |
|
CFG_RTC_OSCILLATOR -- define RTC clock frequency |
|
RTC_DEBUG -- define to show RTC debug message |
|
CONFIG_CMD_DATE -- enable to use date feature in u-boot |
|
|
|
CONFIG_MCFTMR -- define to use DMA timer |
|
CONFIG_MCFPIT -- define to use PIT timer |
|
|
|
CONFIG_FSL_I2C -- define to use FSL common I2C driver |
|
CONFIG_HARD_I2C -- define for I2C hardware support |
|
CONFIG_SOFT_I2C -- define for I2C bit-banged |
|
CFG_I2C_SPEED -- define for I2C speed |
|
CFG_I2C_SLAVE -- define for I2C slave address |
|
CFG_I2C_OFFSET -- define for I2C base address offset |
|
CFG_IMMR -- define for MBAR offset |
|
|
|
CFG_MBAR -- define MBAR offset |
|
|
|
CONFIG_MONITOR_IS_IN_RAM -- Not support |
|
|
|
CFG_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM |
|
|
|
CFG_CSn_BASE -- defines the Chip Select Base register |
|
CFG_CSn_MASK -- defines the Chip Select Mask register |
|
CFG_CSn_CTRL -- defines the Chip Select Control register |
|
|
|
CFG_SDRAM_BASE -- defines the DRAM Base |
|
|
|
CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot, |
|
update will be provided at later time |
|
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL |
|
=========================================== |
|
2.1. System memory map: |
|
Flash: 0x00000000-0x3FFFFFFF (1024MB) |
|
DDR: 0x40000000-0x7FFFFFFF (1024MB) |
|
SRAM: 0x80000000-0x8FFFFFFF (256MB) |
|
IP: 0xF0000000-0xFFFFFFFF (256MB) |
|
|
|
2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and |
|
linux kernel, you can customize it based on your system requirements: |
|
Flash0: 0x00000000-0x00FFFFFF (16MB) |
|
|
|
DDR: 0x40000000-0x4FFFFFFF (64MB) |
|
SRAM: 0x80000000-0x80007FFF (32KB) |
|
IP: 0xFC000000-0xFC0FFFFF (64KB) |
|
|
|
3. COMPILATION |
|
============== |
|
3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or |
|
uClinux version) from codesourcery.com was used. Download it from: |
|
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html |
|
|
|
3.2 Compilation |
|
export CROSS_COMPILE=cross-compile-prefix |
|
cd u-boot-1.x.x |
|
make distclean |
|
make M52277EVB_config |
|
make |
|
|
|
4. SCREEN DUMP |
|
============== |
|
4.1 M52277EVB Development board |
|
(NOTE: May not show exactly the same) |
|
|
|
U-Boot 1.3.1 (Jan 8 2008 - 12:44:08) |
|
|
|
CPU: Freescale MCF52277 (Mask:6c Version:0) |
|
CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ |
|
INP CLK 16 Mhz VCO CLK 480 Mhz |
|
Board: Freescale 52277 EVB |
|
I2C: ready |
|
DRAM: 64 MB |
|
FLASH: 16 MB |
|
In: serial |
|
Out: serial |
|
Err: serial |
|
-> print |
|
baudrate=115200 |
|
hostname=M52277EVB |
|
inpclk=16000000 |
|
loadaddr=(0x40000000 + 0x10000) |
|
load=tftp ${loadaddr) ${u-boot} |
|
upd=run load; run prog |
|
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save |
|
u-boot=u-boot.bin |
|
stdin=serial |
|
stdout=serial |
|
stderr=serial |
|
mem=65024k |
|
|
|
Environment size: 280/32764 bytes |
|
-> bdinfo |
|
memstart = 0x40000000 |
|
memsize = 0x04000000 |
|
flashstart = 0x00000000 |
|
flashsize = 0x01000000 |
|
flashoffset = 0x00000000 |
|
sramstart = 0x80000000 |
|
sramsize = 0x00008000 |
|
mbar = 0xFC000000 |
|
busfreq = 80 MHz |
|
flbfreq = 80 Mhz |
|
inpfreq = 16 Mhz |
|
vcofreq = 480 Mhz |
|
|
|
baudrate = 115200 bps |
|
-> |
|
-> help |
|
? - alias for 'help' |
|
autoscr - run script from memory |
|
base - print or set address offset |
|
bdinfo - print Board Info structure |
|
boot - boot default, i.e., run 'bootcmd' |
|
bootd - boot default, i.e., run 'bootcmd' |
|
bootelf - Boot from an ELF image in memory |
|
bootm - boot application image from memory |
|
bootp - boot image via network using BootP/TFTP protocol |
|
bootvx - Boot vxWorks from an ELF image |
|
cmp - memory compare |
|
coninfo - print console devices and information |
|
cp - memory copy |
|
crc32 - checksum calculation |
|
date - get/set/reset date & time |
|
dcache - enable or disable data cache |
|
echo - echo args to console |
|
erase - erase FLASH memory |
|
flinfo - print FLASH memory information |
|
go - start application at address 'addr' |
|
help - print online help |
|
icache - enable or disable instruction cache |
|
icrc32 - checksum calculation |
|
iloop - infinite loop on address range |
|
imd - i2c memory display |
|
iminfo - print header information for application image |
|
imls - list all images found in flash |
|
imm - i2c memory modify (auto-incrementing) |
|
imw - memory write (fill) |
|
inm - memory modify (constant address) |
|
iprobe - probe to discover valid I2C chip addresses |
|
itest - return true/false on integer compare |
|
loadb - load binary file over serial line (kermit mode) |
|
loads - load S-Record file over serial line |
|
loady - load binary file over serial line (ymodem mode) |
|
loop - infinite loop on address range |
|
ls - list files in a directory (default /) |
|
md - memory display |
|
mm - memory modify (auto-incrementing) |
|
mtest - simple RAM test |
|
mw - memory write (fill) |
|
nm - memory modify (constant address) |
|
ping - send ICMP ECHO_REQUEST to network host |
|
printenv- print environment variables |
|
protect - enable or disable FLASH write protection |
|
reset - Perform RESET of the CPU |
|
run - run commands in an environment variable |
|
saveenv - save environment variables to persistent storage |
|
setenv - set environment variables |
|
sleep - delay execution for some time |
|
version - print monitor version |
|
-> |
