| Open Firmware Flat Tree and usage. | |
| ---------------------------------- | |
| As part of the ongoing cleanup of the Linux PPC trees, the preferred | |
| way to pass bootloader and board setup information is the open | |
| firmware flat tree. | |
| Please take a look at the following email discussion for some | |
| background. | |
| http://ozlabs.org/pipermail/linuxppc-dev/2005-August/019408.html | |
| http://ozlabs.org/pipermail/linuxppc-dev/2005-August/019362.html | |
| The generated tree is part static and part dynamic. | |
| There is a static part which is compiled in with DTC and a dynamic | |
| part which is programmatically appended. | |
| You'll need a fairly recent DTC tool, which is available by git at | |
| rsync://ozlabs.org/dtc/dtc.git | |
| The xxd binary dumper is needed too which I got from | |
| ftp://ftp.uni-erlangen.de/pub/utilities/etc/xxd-1.10.tar.gz | |
| Pantelis Antoniou, 13 Oct 2005 |