include/configs/FADS850SAR.h - u-boot - Git at Google


            
             /*

            
              * A collection of structures, addresses, and values associated with

            
              * the Motorola 860T FADS board.  Copied from the MBX stuff.

            
              * Magnus Damm added defines for 8xxrom and extended bd_info.

            
              * Helmut Buchsbaum added bitvalues for BCSRx

            
              *

            
              * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)

            
              */


            /*

            
             * 1999-nov-26: The FADS is using the following physical memorymap:

            
             *

            
             * ff020000 -> ff02ffff : pcmcia

            
             * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxrom

            
             * ff000000 -> ff00ffff : IMAP       internal in the cpu

            
             * fe000000 -> ffnnnnnn : flash      connected to CS0, setup by 8xxrom

            
             * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom

            
             */


            /* ------------------------------------------------------------------------- */


            /*

            
             * board/config.h - configuration options, board specific

            
             */


            #ifndef __CONFIG_H

            
            #define __CONFIG_H


            /*

            
             * High Level Configuration Options

            
             * (easy to change)

            
             */

            
            #define CONFIG_MPC850		1

            
            #define CONFIG_MPC850SAR	1

            
            #define CONFIG_FADS			1


            #define	CONFIG_SYS_TEXT_BASE	0xFE000000


            #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/

            
            #undef	CONFIG_8xx_CONS_SMC2

            
            #undef	CONFIG_8xx_CONS_NONE

            
            #define CONFIG_BAUDRATE		9600


            #if 0

            
            #define MPC8XX_FACT	10				/* Multiply by 10		*/

            
            #define MPC8XX_XIN	50000000		/* 50 MHz in	*/

            
            #else

            
            #define MPC8XX_FACT	12				/* Multiply by 12 */

            
            #define MPC8XX_XIN	4000000			/* 4 MHz in */

            
            #endif

            
            #define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))


            #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */


            #if 1

            
            #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/

            
            #else

            
            #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

            
            #endif


            #define CONFIG_BOOTCOMMAND	"bootm 02880000"	/* autoboot command */

            
            #define CONFIG_BOOTARGS		" "


            #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/


            /*

            
             * BOOTP options

            
             */

            
            #define CONFIG_BOOTP_BOOTFILESIZE

            
            #define CONFIG_BOOTP_BOOTPATH

            
            #define CONFIG_BOOTP_GATEWAY

            
            #define CONFIG_BOOTP_HOSTNAME


            /*

            
             * Command line configuration.

            
             */

            
            #include <config_cmd_default.h>


            /*

            
             * Miscellaneous configurable options

            
             */

            
            #undef	CONFIG_SYS_LONGHELP			/* undef to save memory		*/

            
            #define	CONFIG_SYS_PROMPT		":>"		/* Monitor Command Prompt	*/

            
            #if defined(CONFIG_CMD_KGDB)

            
            #define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/

            
            #else

            
            #define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/

            
            #endif

            
            #define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

            
            #define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/

            
            #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/


            #define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	*/

            
            #define CONFIG_SYS_MEMTEST_END		0x00800000	/* 0 ... 8 MB in DRAM	*/


            #define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */


            #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/


            /*

            
             * Low Level Configuration Settings

            
             * (address mappings, register initial values, etc.)

            
             * You should know what you are doing if you make changes here.

            
             */

            
            /*-----------------------------------------------------------------------

            
             * Internal Memory Mapped Register

            
             */

            
            #define CONFIG_SYS_IMMR			0xFF000000

            
            #define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))


            /*-----------------------------------------------------------------------

            
             * Definitions for initial stack pointer and data area (in DPRAM)

            
             */

            
            #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR

            
            #define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/

            
            #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

            
            #define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET


            /*-----------------------------------------------------------------------

            
             * Start addresses for the final memory configuration

            
             * (Set up by the startup code)

            
             * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0

            
             * Also NOTE that it doesn't mean SDRAM - it means MEMORY.

            
             */

            
            #define	CONFIG_SYS_SDRAM_BASE		0x00000000

            
            #define	CONFIG_SYS_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */

            
            #define CONFIG_SYS_FLASH_BASE		0x02800000

            
            #define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */

            
            #if 0

            
            #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/

            
            #else

            
            #define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/

            
            #endif

            
            #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE

            
            #define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/


            /*

            
             * For booting Linux, the board info and command line data

            
             * have to be in the first 8 MB of memory, since this is

            
             * the maximum mapped by the Linux kernel during initialization.

            
             */

            
            #define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

            
            /*-----------------------------------------------------------------------

            
             * FLASH organization

            
             */

            
            #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/

            
            #define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/


            #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/

            
            #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/


            #define	CONFIG_ENV_IS_IN_FLASH	1

            
            #define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */

            
            #define	CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/

            
            #define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */


            /*-----------------------------------------------------------------------

            
             * Cache Configuration

            
             */

            
            #define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/

            
            #if defined(CONFIG_CMD_KGDB)

            
            #define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/

            
            #endif


            /*-----------------------------------------------------------------------

            
             * SYPCR - System Protection Control					11-9

            
             * SYPCR can only be written once after reset!

            
             *-----------------------------------------------------------------------

            
             * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze

            
             */

            
            #if defined(CONFIG_WATCHDOG)

            
            #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \

            
            			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)

            
            #else

            
            #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)

            
            #endif


            /*-----------------------------------------------------------------------

            
             * SIUMCR - SIU Module Configuration						11-6

            
             *-----------------------------------------------------------------------

            
             * PCMCIA config., multi-function pin tri-state

            
             */

            
            #define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)


            /*-----------------------------------------------------------------------

            
             * TBSCR - Time Base Status and Control					11-26

            
             *-----------------------------------------------------------------------

            
             * Clear Reference Interrupt Status, Timebase freezing enabled

            
             */

            
            #define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)


            /*-----------------------------------------------------------------------

            
             * PISCR - Periodic Interrupt Status and Control		11-31

            
             *-----------------------------------------------------------------------

            
             * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled

            
             */

            
            #define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)


            /*-----------------------------------------------------------------------

            
             * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30

            
             *-----------------------------------------------------------------------

            
             * Reset PLL lock status sticky bit, timer expired status bit and timer  *

            
             * interrupt status bit - leave PLL multiplication factor unchanged !

            
             */

            
            #define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << 20) | \

            
            				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)


            /*-----------------------------------------------------------------------

            
             * SCCR - System Clock and reset Control Register		15-27

            
             *-----------------------------------------------------------------------

            
             * Set clock output, timebase and RTC source and divider,

            
             * power management and some other internal clocks

            
             */

            
            #define SCCR_MASK	SCCR_EBDF11

            
            #define CONFIG_SYS_SCCR       (SCCR_TBS     | \

            
            				SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \

            
            				SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \

            
            				SCCR_DFALCD00)


             /*-----------------------------------------------------------------------

            
             *

            
             *-----------------------------------------------------------------------

            
             *

            
             */

            
            #define CONFIG_SYS_DER		0


            /* Because of the way the 860 starts up and assigns CS0 the

            
            * entire address space, we have to set the memory controller

            
            * differently.  Normally, you write the option register

            
            * first, and then enable the chip select by writing the

            
            * base register.  For CS0, you must write the base register

            
            * first, followed by the option register.

            
            */


            /*

            
             * Init Memory Controller:

            
             *

            
             * BR0/1 and OR0/1 (FLASH)

            
             */

            
            /* the other CS:s are determined by looking at parameters in BCSRx */


            #define BCSR_ADDR		((uint) 0x02100000)

            
            #define BCSR_SIZE		((uint)(64 * 1024))


            #define FLASH_BASE0_PRELIM	0x02800000	/* FLASH bank #0	*/

            
            #define FLASH_BASE1_PRELIM	0x00000000	/* FLASH bank #1	*/


            #define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */

            
            #define CONFIG_SYS_PRELIM_OR_AM	0xFFE00000	/* OR addr mask */


            /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/

            
            #define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)


            #define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)

            
            #define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/

            
            #define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )


            /* BCSRx - Board Control and Status Registers */

            
            #define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP

            
            #define CONFIG_SYS_OR1_PRELIM	0xffff8110									/* 64Kbyte address space */

            
            #define CONFIG_SYS_BR1_PRELIM	((BCSR_ADDR) | BR_V )


            /*

            
             * Memory Periodic Timer Prescaler

            
             */


            /* periodic timer for refresh */

            
            #define CONFIG_SYS_MAMR_PTA		97		/* start with divider for 100 MHz	*/


            /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/

            
            #define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/

            
            #define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/


            /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/

            
            #define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/

            
            #define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/


            /*

            
             * MAMR settings for SDRAM

            
             */


            /* 8 column SDRAM */

            
            #define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\

            
            			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\

            
            			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)

            
            /* 9 column SDRAM */

            
            #define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\

            
            			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\

            
            			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


            #define CONFIG_SYS_MAMR		0x13a01114


            /* values according to the manual */


            #define PCMCIA_MEM_ADDR		((uint)0xff020000)

            
            #define PCMCIA_MEM_SIZE		((uint)(64 * 1024))


            #define	BCSR0			((uint) (BCSR_ADDR + 00))

            
            #define	BCSR1			((uint) (BCSR_ADDR + 0x04))

            
            #define	BCSR2			((uint) (BCSR_ADDR + 0x08))

            
            #define	BCSR3			((uint) (BCSR_ADDR + 0x0c))

            
            #define	BCSR4			((uint) (BCSR_ADDR + 0x10))


            /* FADS bitvalues by Helmut Buchsbaum

            
             * see MPC8xxADS User's Manual for a proper description

            
             * of the following structures

            
             */


            #define BCSR0_ERB       ((uint)0x80000000)

            
            #define BCSR0_IP        ((uint)0x40000000)

            
            #define BCSR0_BDIS      ((uint)0x10000000)

            
            #define BCSR0_BPS_MASK  ((uint)0x0C000000)

            
            #define BCSR0_ISB_MASK  ((uint)0x01800000)

            
            #define BCSR0_DBGC_MASK ((uint)0x00600000)

            
            #define BCSR0_DBPC_MASK ((uint)0x00180000)

            
            #define BCSR0_EBDF_MASK ((uint)0x00060000)


            #define BCSR1_FLASH_EN           ((uint)0x80000000)

            
            #define BCSR1_DRAM_EN            ((uint)0x40000000)

            
            #define BCSR1_ETHEN              ((uint)0x20000000)

            
            #define BCSR1_IRDEN              ((uint)0x10000000)

            
            #define BCSR1_FLASH_CFG_EN       ((uint)0x08000000)

            
            #define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)

            
            #define BCSR1_BCSR_EN            ((uint)0x02000000)

            
            #define BCSR1_RS232EN_1          ((uint)0x01000000)

            
            #define BCSR1_PCCEN              ((uint)0x00800000)

            
            #define BCSR1_PCCVCC0            ((uint)0x00400000)

            
            #define BCSR1_PCCVPP_MASK        ((uint)0x00300000)

            
            #define BCSR1_DRAM_HALF_WORD     ((uint)0x00080000)

            
            #define BCSR1_RS232EN_2          ((uint)0x00040000)

            
            #define BCSR1_SDRAM_EN           ((uint)0x00020000)

            
            #define BCSR1_PCCVCC1            ((uint)0x00010000)


            #define BCSR2_FLASH_PD_MASK      ((uint)0xF0000000)

            
            #define BCSR2_FLASH_PD_SHIFT	 28

            
            #define BCSR2_DRAM_PD_MASK       ((uint)0x07800000)

            
            #define BCSR2_DRAM_PD_SHIFT      23

            
            #define BCSR2_EXTTOLI_MASK       ((uint)0x00780000)

            
            #define BCSR2_DBREVNR_MASK       ((uint)0x00030000)


            #define BCSR3_DBID_MASK          ((ushort)0x3800)

            
            #define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)

            
            #define BCSR3_BREVNR0            ((ushort)0x0080)

            
            #define BCSR3_FLASH_PD_MASK      ((ushort)0x0070)

            
            #define BCSR3_BREVN1             ((ushort)0x0008)

            
            #define BCSR3_BREVN2_MASK        ((ushort)0x0003)


            #define BCSR4_ETHLOOP            ((uint)0x80000000)

            
            #define BCSR4_TFPLDL             ((uint)0x40000000)

            
            #define BCSR4_TPSQEL             ((uint)0x20000000)

            
            #define BCSR4_SIGNAL_LAMP        ((uint)0x10000000)

            
            #ifdef CONFIG_MPC823

            
            #define BCSR4_USB_EN             ((uint)0x08000000)

            
            #endif /* CONFIG_MPC823 */

            
            #ifdef CONFIG_MPC860SAR

            
            #define BCSR4_UTOPIA_EN          ((uint)0x08000000)

            
            #endif /* CONFIG_MPC860SAR */

            
            #ifdef CONFIG_MPC860T

            
            #define BCSR4_FETH_EN            ((uint)0x08000000)

            
            #endif /* CONFIG_MPC860T */

            
            #ifdef CONFIG_MPC823

            
            #define BCSR4_USB_SPEED          ((uint)0x04000000)

            
            #endif /* CONFIG_MPC823 */

            
            #ifdef CONFIG_MPC860T

            
            #define BCSR4_FETHCFG0           ((uint)0x04000000)

            
            #endif /* CONFIG_MPC860T */

            
            #ifdef CONFIG_MPC823

            
            #define BCSR4_VCCO               ((uint)0x02000000)

            
            #endif /* CONFIG_MPC823 */

            
            #ifdef CONFIG_MPC860T

            
            #define BCSR4_FETHFDE            ((uint)0x02000000)

            
            #endif /* CONFIG_MPC860T */

            
            #ifdef CONFIG_MPC823

            
            #define BCSR4_VIDEO_ON           ((uint)0x00800000)

            
            #endif /* CONFIG_MPC823 */

            
            #ifdef CONFIG_MPC823

            
            #define BCSR4_VDO_EKT_CLK_EN     ((uint)0x00400000)

            
            #endif /* CONFIG_MPC823 */

            
            #ifdef CONFIG_MPC860T

            
            #define BCSR4_FETHCFG1           ((uint)0x00400000)

            
            #endif /* CONFIG_MPC860T */

            
            #ifdef CONFIG_MPC823

            
            #define BCSR4_VIDEO_RST          ((uint)0x00200000)

            
            #endif /* CONFIG_MPC823 */

            
            #ifdef CONFIG_MPC860T

            
            #define BCSR4_FETHRST            ((uint)0x00200000)

            
            #endif /* CONFIG_MPC860T */

            
            #define BCSR4_MODEM_EN           ((uint)0x00100000)

            
            #define BCSR4_DATA_VOICE         ((uint)0x00080000)


            #define CONFIG_DRAM_50MHZ		1

            
            #define CONFIG_SDRAM_50MHZ


            /* We don't use the 8259.

            
            */

            
            #define NR_8259_INTS	0


            #define CONFIG_DISK_SPINUP_TIME 1000000


            /* PCMCIA configuration */


            #define PCMCIA_MAX_SLOTS    2


            #ifdef CONFIG_MPC860

            
            #define PCMCIA_SLOT_A 1

            
            #endif


            #define CONFIG_SYS_DAUGHTERBOARD


            #endif	/* __CONFIG_H */
	/*
	* A collection of structures, addresses, and values associated with
	* the Motorola 860T FADS board. Copied from the MBX stuff.
	* Magnus Damm added defines for 8xxrom and extended bd_info.
	* Helmut Buchsbaum added bitvalues for BCSRx
	*
	* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
	*/

	/*
	* 1999-nov-26: The FADS is using the following physical memorymap:
	*
	* ff020000 -> ff02ffff : pcmcia
	* ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxrom
	* ff000000 -> ff00ffff : IMAP internal in the cpu
	* fe000000 -> ffnnnnnn : flash connected to CS0, setup by 8xxrom
	* 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
	*/

	/* ------------------------------------------------------------------------- */

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_MPC850 1
	#define CONFIG_MPC850SAR 1
	#define CONFIG_FADS 1

	#define CONFIG_SYS_TEXT_BASE 0xFE000000

	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	#undef CONFIG_8xx_CONS_SMC2
	#undef CONFIG_8xx_CONS_NONE
	#define CONFIG_BAUDRATE 9600

	#if 0
	#define MPC8XX_FACT 10 /* Multiply by 10 */
	#define MPC8XX_XIN 50000000 /* 50 MHz in */
	#else
	#define MPC8XX_FACT 12 /* Multiply by 12 */
	#define MPC8XX_XIN 4000000 /* 4 MHz in */
	#endif
	#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))

	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */

	#if 1
	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	#else
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#endif

	#define CONFIG_BOOTCOMMAND "bootm 02880000" /* autoboot command */
	#define CONFIG_BOOTARGS " "

	#undef CONFIG_WATCHDOG /* watchdog disabled */


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>


	/*
	* Miscellaneous configurable options
	*/
	#undef CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT ":>" /* Monitor Command Prompt */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 0 ... 8 MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */

	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	*/
	/*-----------------------------------------------------------------------
	* Internal Memory Mapped Register
	*/
	#define CONFIG_SYS_IMMR 0xFF000000
	#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/
	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
	* Also NOTE that it doesn't mean SDRAM - it means MEMORY.
	*/
	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
	#define CONFIG_SYS_FLASH_BASE 0x02800000
	#define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
	#if 0
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 128 kB for Monitor */
	#else
	#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */
	#endif
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 128 kB for malloc() */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
	#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
	#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control 11-9
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	*/
	#if defined(CONFIG_WATCHDOG)
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	#else
	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	#endif

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration 11-6
	*-----------------------------------------------------------------------
	* PCMCIA config., multi-function pin tri-state
	*/
	#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)

	/*-----------------------------------------------------------------------
	* TBSCR - Time Base Status and Control 11-26
	*-----------------------------------------------------------------------
	* Clear Reference Interrupt Status, Timebase freezing enabled
	*/
	#define CONFIG_SYS_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBE)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 11-31
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	*/
	#define CONFIG_SYS_PISCR (PISCR_PS \| PISCR_PITF)

	/*-----------------------------------------------------------------------
	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	*-----------------------------------------------------------------------
	* Reset PLL lock status sticky bit, timer expired status bit and timer *
	* interrupt status bit - leave PLL multiplication factor unchanged !
	*/
	#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << 20) \| \
	PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock and reset Control Register 15-27
	*-----------------------------------------------------------------------
	* Set clock output, timebase and RTC source and divider,
	* power management and some other internal clocks
	*/
	#define SCCR_MASK SCCR_EBDF11
	#define CONFIG_SYS_SCCR (SCCR_TBS \| \
	SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
	SCCR_DFALCD00)

	/*-----------------------------------------------------------------------
	*
	*-----------------------------------------------------------------------
	*
	*/
	#define CONFIG_SYS_DER 0

	/* Because of the way the 860 starts up and assigns CS0 the
	* entire address space, we have to set the memory controller
	* differently. Normally, you write the option register
	* first, and then enable the chip select by writing the
	* base register. For CS0, you must write the base register
	* first, followed by the option register.
	*/

	/*
	* Init Memory Controller:
	*
	* BR0/1 and OR0/1 (FLASH)
	*/
	/* the other CS:s are determined by looking at parameters in BCSRx */


	#define BCSR_ADDR ((uint) 0x02100000)
	#define BCSR_SIZE ((uint)(64 * 1024))

	#define FLASH_BASE0_PRELIM 0x02800000 /* FLASH bank #0 */
	#define FLASH_BASE1_PRELIM 0x00000000 /* FLASH bank #1 */

	#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
	#define CONFIG_SYS_PRELIM_OR_AM 0xFFE00000 /* OR addr mask */

	/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
	#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_ACS_DIV4 \| OR_BI \| OR_SCY_3_CLK \| OR_TRLX)

	#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH) /* 1 Mbyte until detected and only 1 Mbyte is needed*/
	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )

	/* BCSRx - Board Control and Status Registers */
	#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
	#define CONFIG_SYS_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
	#define CONFIG_SYS_BR1_PRELIM ((BCSR_ADDR) \| BR_V )


	/*
	* Memory Periodic Timer Prescaler
	*/

	/* periodic timer for refresh */
	#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */

	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
	#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
	#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */

	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
	#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
	#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */

	/*
	* MAMR settings for SDRAM
	*/

	/* 8 column SDRAM */
	#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
	/* 9 column SDRAM */
	#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)

	#define CONFIG_SYS_MAMR 0x13a01114

	/* values according to the manual */


	#define PCMCIA_MEM_ADDR ((uint)0xff020000)
	#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))

	#define BCSR0 ((uint) (BCSR_ADDR + 00))
	#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
	#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
	#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
	#define BCSR4 ((uint) (BCSR_ADDR + 0x10))

	/* FADS bitvalues by Helmut Buchsbaum
	* see MPC8xxADS User's Manual for a proper description
	* of the following structures
	*/

	#define BCSR0_ERB ((uint)0x80000000)
	#define BCSR0_IP ((uint)0x40000000)
	#define BCSR0_BDIS ((uint)0x10000000)
	#define BCSR0_BPS_MASK ((uint)0x0C000000)
	#define BCSR0_ISB_MASK ((uint)0x01800000)
	#define BCSR0_DBGC_MASK ((uint)0x00600000)
	#define BCSR0_DBPC_MASK ((uint)0x00180000)
	#define BCSR0_EBDF_MASK ((uint)0x00060000)

	#define BCSR1_FLASH_EN ((uint)0x80000000)
	#define BCSR1_DRAM_EN ((uint)0x40000000)
	#define BCSR1_ETHEN ((uint)0x20000000)
	#define BCSR1_IRDEN ((uint)0x10000000)
	#define BCSR1_FLASH_CFG_EN ((uint)0x08000000)
	#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
	#define BCSR1_BCSR_EN ((uint)0x02000000)
	#define BCSR1_RS232EN_1 ((uint)0x01000000)
	#define BCSR1_PCCEN ((uint)0x00800000)
	#define BCSR1_PCCVCC0 ((uint)0x00400000)
	#define BCSR1_PCCVPP_MASK ((uint)0x00300000)
	#define BCSR1_DRAM_HALF_WORD ((uint)0x00080000)
	#define BCSR1_RS232EN_2 ((uint)0x00040000)
	#define BCSR1_SDRAM_EN ((uint)0x00020000)
	#define BCSR1_PCCVCC1 ((uint)0x00010000)

	#define BCSR2_FLASH_PD_MASK ((uint)0xF0000000)
	#define BCSR2_FLASH_PD_SHIFT 28
	#define BCSR2_DRAM_PD_MASK ((uint)0x07800000)
	#define BCSR2_DRAM_PD_SHIFT 23
	#define BCSR2_EXTTOLI_MASK ((uint)0x00780000)
	#define BCSR2_DBREVNR_MASK ((uint)0x00030000)

	#define BCSR3_DBID_MASK ((ushort)0x3800)
	#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
	#define BCSR3_BREVNR0 ((ushort)0x0080)
	#define BCSR3_FLASH_PD_MASK ((ushort)0x0070)
	#define BCSR3_BREVN1 ((ushort)0x0008)
	#define BCSR3_BREVN2_MASK ((ushort)0x0003)

	#define BCSR4_ETHLOOP ((uint)0x80000000)
	#define BCSR4_TFPLDL ((uint)0x40000000)
	#define BCSR4_TPSQEL ((uint)0x20000000)
	#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
	#ifdef CONFIG_MPC823
	#define BCSR4_USB_EN ((uint)0x08000000)
	#endif /* CONFIG_MPC823 */
	#ifdef CONFIG_MPC860SAR
	#define BCSR4_UTOPIA_EN ((uint)0x08000000)
	#endif /* CONFIG_MPC860SAR */
	#ifdef CONFIG_MPC860T
	#define BCSR4_FETH_EN ((uint)0x08000000)
	#endif /* CONFIG_MPC860T */
	#ifdef CONFIG_MPC823
	#define BCSR4_USB_SPEED ((uint)0x04000000)
	#endif /* CONFIG_MPC823 */
	#ifdef CONFIG_MPC860T
	#define BCSR4_FETHCFG0 ((uint)0x04000000)
	#endif /* CONFIG_MPC860T */
	#ifdef CONFIG_MPC823
	#define BCSR4_VCCO ((uint)0x02000000)
	#endif /* CONFIG_MPC823 */
	#ifdef CONFIG_MPC860T
	#define BCSR4_FETHFDE ((uint)0x02000000)
	#endif /* CONFIG_MPC860T */
	#ifdef CONFIG_MPC823
	#define BCSR4_VIDEO_ON ((uint)0x00800000)
	#endif /* CONFIG_MPC823 */
	#ifdef CONFIG_MPC823
	#define BCSR4_VDO_EKT_CLK_EN ((uint)0x00400000)
	#endif /* CONFIG_MPC823 */
	#ifdef CONFIG_MPC860T
	#define BCSR4_FETHCFG1 ((uint)0x00400000)
	#endif /* CONFIG_MPC860T */
	#ifdef CONFIG_MPC823
	#define BCSR4_VIDEO_RST ((uint)0x00200000)
	#endif /* CONFIG_MPC823 */
	#ifdef CONFIG_MPC860T
	#define BCSR4_FETHRST ((uint)0x00200000)
	#endif /* CONFIG_MPC860T */
	#define BCSR4_MODEM_EN ((uint)0x00100000)
	#define BCSR4_DATA_VOICE ((uint)0x00080000)

	#define CONFIG_DRAM_50MHZ 1
	#define CONFIG_SDRAM_50MHZ

	/* We don't use the 8259.
	*/
	#define NR_8259_INTS 0

	#define CONFIG_DISK_SPINUP_TIME 1000000


	/* PCMCIA configuration */

	#define PCMCIA_MAX_SLOTS 2

	#ifdef CONFIG_MPC860
	#define PCMCIA_SLOT_A 1
	#endif

	#define CONFIG_SYS_DAUGHTERBOARD

	#endif /* __CONFIG_H */