| /* | |
| * Copyright 2012 Freescale Semiconductor, Inc. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include "imagetool.h" | |
| #include <image.h> | |
| #include "pblimage.h" | |
| #include "pbl_crc32.h" | |
| /* | |
| * Initialize to an invalid value. | |
| */ | |
| static uint32_t next_pbl_cmd = 0x82000000; | |
| /* | |
| * need to store all bytes in memory for calculating crc32, then write the | |
| * bytes to image file for PBL boot. | |
| */ | |
| static unsigned char mem_buf[1000000]; | |
| static unsigned char *pmem_buf = mem_buf; | |
| static int pbl_size; | |
| static char *fname = "Unknown"; | |
| static int lineno = -1; | |
| static struct pbl_header pblimage_header; | |
| static union | |
| { | |
| char c[4]; | |
| unsigned char l; | |
| } endian_test = { {'l', '?', '?', 'b'} }; | |
| #define ENDIANNESS ((char)endian_test.l) | |
| /* | |
| * The PBL can load up to 64 bytes at a time, so we split the U-Boot | |
| * image into 64 byte chunks. PBL needs a command for each piece, of | |
| * the form "81xxxxxx", where "xxxxxx" is the offset. Calculate the | |
| * start offset by subtracting the size of the u-boot image from the | |
| * top of the allowable 24-bit range. | |
| */ | |
| static void init_next_pbl_cmd(FILE *fp_uboot) | |
| { | |
| struct stat st; | |
| int fd = fileno(fp_uboot); | |
| if (fstat(fd, &st) == -1) { | |
| printf("Error: Could not determine u-boot image size. %s\n", | |
| strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| next_pbl_cmd = 0x82000000 - st.st_size; | |
| } | |
| static void generate_pbl_cmd(void) | |
| { | |
| uint32_t val = next_pbl_cmd; | |
| next_pbl_cmd += 0x40; | |
| int i; | |
| for (i = 3; i >= 0; i--) { | |
| *pmem_buf++ = (val >> (i * 8)) & 0xff; | |
| pbl_size++; | |
| } | |
| } | |
| static void pbl_fget(size_t size, FILE *stream) | |
| { | |
| unsigned char c; | |
| int c_temp; | |
| while (size && (c_temp = fgetc(stream)) != EOF) { | |
| c = (unsigned char)c_temp; | |
| *pmem_buf++ = c; | |
| pbl_size++; | |
| size--; | |
| } | |
| } | |
| /* load split u-boot with PBI command 81xxxxxx. */ | |
| static void load_uboot(FILE *fp_uboot) | |
| { | |
| init_next_pbl_cmd(fp_uboot); | |
| while (next_pbl_cmd < 0x82000000) { | |
| generate_pbl_cmd(); | |
| pbl_fget(64, fp_uboot); | |
| } | |
| } | |
| static void check_get_hexval(char *token) | |
| { | |
| uint32_t hexval; | |
| int i; | |
| if (!sscanf(token, "%x", &hexval)) { | |
| printf("Error:%s[%d] - Invalid hex data(%s)\n", fname, | |
| lineno, token); | |
| exit(EXIT_FAILURE); | |
| } | |
| for (i = 3; i >= 0; i--) { | |
| *pmem_buf++ = (hexval >> (i * 8)) & 0xff; | |
| pbl_size++; | |
| } | |
| } | |
| static void pbl_parser(char *name) | |
| { | |
| FILE *fd = NULL; | |
| char *line = NULL; | |
| char *token, *saveptr1, *saveptr2; | |
| size_t len = 0; | |
| fname = name; | |
| fd = fopen(name, "r"); | |
| if (fd == NULL) { | |
| printf("Error:%s - Can't open\n", fname); | |
| exit(EXIT_FAILURE); | |
| } | |
| while ((getline(&line, &len, fd)) > 0) { | |
| lineno++; | |
| token = strtok_r(line, "\r\n", &saveptr1); | |
| /* drop all lines with zero tokens (= empty lines) */ | |
| if (token == NULL) | |
| continue; | |
| for (line = token;; line = NULL) { | |
| token = strtok_r(line, " \t", &saveptr2); | |
| if (token == NULL) | |
| break; | |
| /* Drop all text starting with '#' as comments */ | |
| if (token[0] == '#') | |
| break; | |
| check_get_hexval(token); | |
| } | |
| } | |
| if (line) | |
| free(line); | |
| fclose(fd); | |
| } | |
| static uint32_t reverse_byte(uint32_t val) | |
| { | |
| uint32_t temp; | |
| unsigned char *p1; | |
| int j; | |
| temp = val; | |
| p1 = (unsigned char *)&temp; | |
| for (j = 3; j >= 0; j--) | |
| *p1++ = (val >> (j * 8)) & 0xff; | |
| return temp; | |
| } | |
| /* write end command and crc command to memory. */ | |
| static void add_end_cmd(void) | |
| { | |
| uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000, | |
| 0x091380c0, 0x00000000}; | |
| uint32_t crc32_pbl; | |
| int i; | |
| unsigned char *p = (unsigned char *)&pbl_end_cmd; | |
| if (ENDIANNESS == 'l') { | |
| for (i = 0; i < 4; i++) | |
| pbl_end_cmd[i] = reverse_byte(pbl_end_cmd[i]); | |
| } | |
| for (i = 0; i < 16; i++) { | |
| *pmem_buf++ = *p++; | |
| pbl_size++; | |
| } | |
| /* Add PBI CRC command. */ | |
| *pmem_buf++ = 0x08; | |
| *pmem_buf++ = 0x13; | |
| *pmem_buf++ = 0x80; | |
| *pmem_buf++ = 0x40; | |
| pbl_size += 4; | |
| /* calculated CRC32 and write it to memory. */ | |
| crc32_pbl = pbl_crc32(0, (const char *)mem_buf, pbl_size); | |
| *pmem_buf++ = (crc32_pbl >> 24) & 0xff; | |
| *pmem_buf++ = (crc32_pbl >> 16) & 0xff; | |
| *pmem_buf++ = (crc32_pbl >> 8) & 0xff; | |
| *pmem_buf++ = (crc32_pbl) & 0xff; | |
| pbl_size += 4; | |
| if ((pbl_size % 16) != 0) { | |
| for (i = 0; i < 8; i++) { | |
| *pmem_buf++ = 0x0; | |
| pbl_size++; | |
| } | |
| } | |
| if ((pbl_size % 16 != 0)) { | |
| printf("Error: Bad size of image file\n"); | |
| exit(EXIT_FAILURE); | |
| } | |
| } | |
| void pbl_load_uboot(int ifd, struct image_tool_params *params) | |
| { | |
| FILE *fp_uboot; | |
| int size; | |
| /* parse the rcw.cfg file. */ | |
| pbl_parser(params->imagename); | |
| /* parse the pbi.cfg file. */ | |
| pbl_parser(params->imagename2); | |
| fp_uboot = fopen(params->datafile, "r"); | |
| if (fp_uboot == NULL) { | |
| printf("Error: %s open failed\n", params->datafile); | |
| exit(EXIT_FAILURE); | |
| } | |
| load_uboot(fp_uboot); | |
| add_end_cmd(); | |
| fclose(fp_uboot); | |
| lseek(ifd, 0, SEEK_SET); | |
| size = pbl_size; | |
| if (write(ifd, (const void *)&mem_buf, size) != size) { | |
| fprintf(stderr, "Write error on %s: %s\n", | |
| params->imagefile, strerror(errno)); | |
| exit(EXIT_FAILURE); | |
| } | |
| } | |
| static int pblimage_check_image_types(uint8_t type) | |
| { | |
| if (type == IH_TYPE_PBLIMAGE) | |
| return EXIT_SUCCESS; | |
| else | |
| return EXIT_FAILURE; | |
| } | |
| static int pblimage_verify_header(unsigned char *ptr, int image_size, | |
| struct image_tool_params *params) | |
| { | |
| struct pbl_header *pbl_hdr = (struct pbl_header *) ptr; | |
| /* Only a few checks can be done: search for magic numbers */ | |
| if (ENDIANNESS == 'l') { | |
| if (pbl_hdr->preamble != reverse_byte(RCW_PREAMBLE)) | |
| return -FDT_ERR_BADSTRUCTURE; | |
| if (pbl_hdr->rcwheader != reverse_byte(RCW_HEADER)) | |
| return -FDT_ERR_BADSTRUCTURE; | |
| } else { | |
| if (pbl_hdr->preamble != RCW_PREAMBLE) | |
| return -FDT_ERR_BADSTRUCTURE; | |
| if (pbl_hdr->rcwheader != RCW_HEADER) | |
| return -FDT_ERR_BADSTRUCTURE; | |
| } | |
| return 0; | |
| } | |
| static void pblimage_print_header(const void *ptr) | |
| { | |
| printf("Image Type: Freescale PBL Boot Image\n"); | |
| } | |
| static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd, | |
| struct image_tool_params *params) | |
| { | |
| /*nothing need to do, pbl_load_uboot takes care of whole file. */ | |
| } | |
| /* pblimage parameters */ | |
| static struct image_type_params pblimage_params = { | |
| .name = "Freescale PBL Boot Image support", | |
| .header_size = sizeof(struct pbl_header), | |
| .hdr = (void *)&pblimage_header, | |
| .check_image_type = pblimage_check_image_types, | |
| .verify_header = pblimage_verify_header, | |
| .print_header = pblimage_print_header, | |
| .set_header = pblimage_set_header, | |
| }; | |
| void init_pbl_image_type(void) | |
| { | |
| pbl_size = 0; | |
| register_image_type(&pblimage_params); | |
| } |