| /* | |
| * (C) Copyright 2002, 2003 | |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> | |
| * Marius Groeger <mgroeger@sysgo.de> | |
| * Gary Jennejohn <garyj@denx.de> | |
| * David Mueller <d.mueller@elsoft.ch> | |
| * | |
| * Configuation settings for the MPL VCMA9 board. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| #define MACH_TYPE_MPL_VCMA9 227 | |
| /* | |
| * High Level Configuration Options | |
| * (easy to change) | |
| */ | |
| #define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */ | |
| #define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ | |
| #define CONFIG_VCMA9 /* on a MPL VCMA9 Board */ | |
| #define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */ | |
| #define CONFIG_SYS_TEXT_BASE 0x0 | |
| #define CONFIG_SYS_GENERIC_BOARD | |
| #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH | |
| /* input clock of PLL (VCMA9 has 12MHz input clock) */ | |
| #define CONFIG_SYS_CLK_FREQ 12000000 | |
| #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ | |
| #define CONFIG_SETUP_MEMORY_TAGS | |
| #define CONFIG_INITRD_TAG | |
| /* | |
| * BOOTP options | |
| */ | |
| #define CONFIG_BOOTP_BOOTFILESIZE | |
| #define CONFIG_BOOTP_BOOTPATH | |
| #define CONFIG_BOOTP_GATEWAY | |
| #define CONFIG_BOOTP_HOSTNAME | |
| /* | |
| * Command line configuration. | |
| */ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_CMD_CACHE | |
| #define CONFIG_CMD_EEPROM | |
| #define CONFIG_CMD_I2C | |
| #define CONFIG_CMD_USB | |
| #define CONFIG_CMD_REGINFO | |
| #define CONFIG_CMD_DATE | |
| #define CONFIG_CMD_ELF | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_CMD_BSP | |
| #define CONFIG_CMD_NAND | |
| #define CONFIG_CMD_NAND_YAFFS | |
| #define CONFIG_BOARD_LATE_INIT | |
| #define CONFIG_SYS_HUSH_PARSER | |
| #define CONFIG_CMDLINE_EDITING | |
| /* | |
| * I2C stuff: | |
| * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at | |
| * address 0x50 with 16bit addressing | |
| */ | |
| #define CONFIG_SYS_I2C | |
| /* we use the built-in I2C controller */ | |
| #define CONFIG_SYS_I2C_S3C24X0 | |
| #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* I2C speed */ | |
| #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x7F /* I2C slave addr */ | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 | |
| /* use EEPROM for environment vars */ | |
| #define CONFIG_ENV_IS_IN_EEPROM 1 | |
| /* environment starts at offset 0 */ | |
| #define CONFIG_ENV_OFFSET 0x000 | |
| /* 2KB should be more than enough */ | |
| #define CONFIG_ENV_SIZE 0x800 | |
| #undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW | |
| /* 64 bytes page write mode on 24C256 */ | |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 | |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 | |
| /* | |
| * Hardware drivers | |
| */ | |
| #define CONFIG_CS8900 /* we have a CS8900 on-board */ | |
| #define CONFIG_CS8900_BASE 0x20000300 | |
| #define CONFIG_CS8900_BUS16 | |
| /* | |
| * select serial console configuration | |
| */ | |
| #define CONFIG_S3C24X0_SERIAL | |
| #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on VCMA9 */ | |
| /* USB support (currently only works with D-cache off) */ | |
| #define CONFIG_USB_OHCI | |
| #define CONFIG_USB_OHCI_S3C24XX | |
| #define CONFIG_USB_KEYBOARD | |
| #define CONFIG_USB_STORAGE | |
| #define CONFIG_DOS_PARTITION | |
| /* Enable needed helper functions */ | |
| #define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ | |
| /* RTC */ | |
| #define CONFIG_RTC_S3C24X0 | |
| /* allow to overwrite serial and ethaddr */ | |
| #define CONFIG_ENV_OVERWRITE | |
| #define CONFIG_BAUDRATE 9600 | |
| #define CONFIG_BOOTDELAY 5 | |
| #define CONFIG_BOOT_RETRY_TIME -1 | |
| #define CONFIG_RESET_TO_RETRY | |
| #define CONFIG_ZERO_BOOTDELAY_CHECK | |
| #define CONFIG_NETMASK 255.255.255.0 | |
| #define CONFIG_IPADDR 10.0.0.110 | |
| #define CONFIG_SERVERIP 10.0.0.1 | |
| #if defined(CONFIG_CMD_KGDB) | |
| /* speed to run kgdb serial port */ | |
| #define CONFIG_KGDB_BAUDRATE 115200 | |
| #endif | |
| /* Miscellaneous configurable options */ | |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| #define CONFIG_SYS_PROMPT "VCMA9 # " | |
| #define CONFIG_SYS_CBSIZE 256 | |
| /* Print Buffer Size */ | |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| #define CONFIG_SYS_MAXARGS 16 | |
| /* Boot Argument Buffer Size */ | |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ | |
| #define CONFIG_DISPLAY_BOARDINFO /* Display board info */ | |
| #define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ | |
| #define CONFIG_SYS_MEMTEST_END 0x31FFFFFF /* 32 MB in DRAM */ | |
| #define CONFIG_SYS_ALT_MEMTEST | |
| #define CONFIG_SYS_LOAD_ADDR 0x30800000 | |
| /* we configure PWM Timer 4 to 1ms 1000Hz */ | |
| /* support additional compression methods */ | |
| #define CONFIG_BZIP2 | |
| #define CONFIG_LZO | |
| #define CONFIG_LZMA | |
| /* Ident */ | |
| /*#define VERSION_TAG "released"*/ | |
| #define VERSION_TAG "unstable" | |
| #define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \ | |
| "MEV-10080-001 " VERSION_TAG | |
| /* Physical Memory Map */ | |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ | |
| #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ | |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ | |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 | |
| /* FLASH and environment organization */ | |
| #define CONFIG_SYS_FLASH_CFI | |
| #define CONFIG_FLASH_CFI_DRIVER | |
| #define CONFIG_FLASH_CFI_LEGACY | |
| #define CONFIG_SYS_FLASH_LEGACY_512Kx16 | |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 | |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } | |
| #define CONFIG_SYS_MAX_FLASH_SECT (19) | |
| /* | |
| * Size of malloc() pool | |
| * BZIP2 / LZO / LZMA need a lot of RAM | |
| */ | |
| #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) | |
| #define CONFIG_SYS_MONITOR_LEN (512 * 1024) | |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE | |
| /* NAND configuration */ | |
| #ifdef CONFIG_CMD_NAND | |
| #define CONFIG_NAND_S3C2410 | |
| #define CONFIG_SYS_S3C2410_NAND_HWECC | |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| #define CONFIG_SYS_NAND_BASE 0x4E000000 | |
| #define CONFIG_S3C24XX_CUSTOM_NAND_TIMING | |
| #define CONFIG_S3C24XX_TACLS 1 | |
| #define CONFIG_S3C24XX_TWRPH0 5 | |
| #define CONFIG_S3C24XX_TWRPH1 3 | |
| #endif | |
| #define MULTI_PURPOSE_SOCKET_ADDR 0x08000000 | |
| /* File system */ | |
| #define CONFIG_CMD_FAT | |
| #define CONFIG_CMD_UBI | |
| #define CONFIG_CMD_UBIFS | |
| #define CONFIG_CMD_JFFS2 | |
| #define CONFIG_YAFFS2 | |
| #define CONFIG_RBTREE | |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ | |
| #define CONFIG_MTD_PARTITIONS | |
| #define CONFIG_CMD_MTDPARTS | |
| #define CONFIG_LZO | |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 | |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ | |
| GENERATED_GBL_DATA_SIZE) | |
| #define CONFIG_BOARD_EARLY_INIT_F | |
| #endif /* __CONFIG_H */ |